Skip to content
Snippets Groups Projects
  • Thibaut VARÈNE's avatar
    eb38af78
    ath79: add support for MikroTik RouterBOARD mAP lite · eb38af78
    Thibaut VARÈNE authored
    The MikroTik RouterBOARD mAPL-2nd (sold as mAP Lite) is a small
    2.4 GHz 802.11b/g/n PoE-capable AP.
    
    See https://mikrotik.com/product/RBmAPL-2nD for more info.
    
    Specifications:
     - SoC: Qualcomm Atheros QCA9533
     - RAM: 64 MB
     - Storage: 16 MB NOR
     - Wireless: Atheros AR9531 (SoC) 802.11b/g/n 2x2:2, 1.5 dBi antenna
     - Ethernet: Atheros AR8229 (SoC), 1x 10/100 port, 802.3af/at PoE in
     - 4 user-controllable LEDs:
       · 1x power (green)
       · 1x user (green)
       · 1x lan (green)
       · 1x wlan (green)
    
    Flashing:
     TFTP boot initramfs image and then perform sysupgrade. Follow common
     MikroTik procedure as in https://openwrt.org/toh/mikrotik/common
    
    .
    
    Note: following 781d4bfb
     The network setup avoids using the integrated switch and connects the
     single Ethernet port directly. This way, link speed (10/100 Mbps) is
     properly reported by eth0.
    
    Signed-off-by: default avatarThibaut VARÈNE <hacks@slashdirt.org>
    eb38af78
    History
    ath79: add support for MikroTik RouterBOARD mAP lite
    Thibaut VARÈNE authored
    The MikroTik RouterBOARD mAPL-2nd (sold as mAP Lite) is a small
    2.4 GHz 802.11b/g/n PoE-capable AP.
    
    See https://mikrotik.com/product/RBmAPL-2nD for more info.
    
    Specifications:
     - SoC: Qualcomm Atheros QCA9533
     - RAM: 64 MB
     - Storage: 16 MB NOR
     - Wireless: Atheros AR9531 (SoC) 802.11b/g/n 2x2:2, 1.5 dBi antenna
     - Ethernet: Atheros AR8229 (SoC), 1x 10/100 port, 802.3af/at PoE in
     - 4 user-controllable LEDs:
       · 1x power (green)
       · 1x user (green)
       · 1x lan (green)
       · 1x wlan (green)
    
    Flashing:
     TFTP boot initramfs image and then perform sysupgrade. Follow common
     MikroTik procedure as in https://openwrt.org/toh/mikrotik/common
    
    .
    
    Note: following 781d4bfb
     The network setup avoids using the integrated switch and connects the
     single Ethernet port directly. This way, link speed (10/100 Mbps) is
     properly reported by eth0.
    
    Signed-off-by: default avatarThibaut VARÈNE <hacks@slashdirt.org>