From 3771176c9ef9b5d231e9019bc0c872dbe3617209 Mon Sep 17 00:00:00 2001
From: Chuanhong Guo <gch981213@gmail.com>
Date: Thu, 13 Dec 2018 15:14:10 +0800
Subject: [PATCH] ath79: add support for linux 4.19
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
The following patches are dropped because they are merged upstream:
-0001-tty-serial-drop-QCA-pecific-SoC-symbols.patch
-0006-usb-drop-deprecated-symbols.patch
-0009-MIPS-ath79-add-lots-of-missing-registers.patch
-0010-MIPS-ath79-add-support-for-QCA953x-QCA956x-TP9343.patch
-0014-MIPS-ath79-finetune-cpu-overrides.patch
-0015-MIPS-ath79-enable-uart-during-early_prink.patch
-0016-MIPS-ath79-get-PCIe-controller-out-of-reset.patch
This patch is dropped due to the introduction of spi-mem framework:
-461-spi-ath79-add-fast-flash-read.patch
Thank to Michael Marley @mamarley for his work on this patch:
-910-unaligned_access_hacks.patch
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
[synchronized kernel config with make kernel_oldconfig]
Signed-off-by: Petr Å tetiar <ynezz@true.cz>
---
target/linux/ath79/config-4.19 | 229 ++++
...2-watchdog-ath79-fix-maximum-timeout.patch | 32 +
...ds-add-reset-controller-based-driver.patch | 186 +++
.../0004-phy-add-ath79-usb-phys.patch | 320 +++++
...005-usb-add-more-OF-quirk-properties.patch | 24 +
...9-intc-add-irq-cascade-driver-for-QC.patch | 168 +++
...ip-irq-ath79-cpu-drop-OF-init-helper.patch | 23 +
...S-ath79-select-the-PINCTRL-subsystem.patch | 24 +
...ngs-PCI-qcom-ar7100-adds-binding-doc.patch | 57 +
.../0018-MIPS-pci-ar71xx-convert-to-OF.patch | 202 ++++
...ngs-PCI-qcom-ar7240-adds-binding-doc.patch | 61 +
.../0020-MIPS-pci-ar724x-convert-to-OF.patch | 205 ++++
...elpers-for-setting-clocks-and-expose.patch | 243 ++++
...legacy-wdt-and-uart-clock-aliases-ou.patch | 114 ++
...ass-PLL-base-to-clock-init-functions.patch | 242 ++++
...specifying-the-reference-clock-in-DT.patch | 229 ++++
...rt-setting-up-clock-via-DT-on-all-So.patch | 77 ++
...9-export-switch-MDIO-reference-clock.patch | 59 +
...0027-MIPS-ath79-drop-legacy-IRQ-code.patch | 233 ++++
.../0028-MIPS-ath79-drop-machfiles.patch | 1048 +++++++++++++++++
...0029-MIPS-ath79-drop-legacy-pci-code.patch | 379 ++++++
...op-platform-device-registration-code.patch | 933 +++++++++++++++
.../0031-MIPS-ath79-drop-OF-clock-code.patch | 95 ++
.../0032-MIPS-ath79-sanitize-symbols.patch | 93 ++
.../0033-spi-ath79-drop-pdata-support.patch | 73 ++
.../0034-MIPS-ath79-ath9k-exports.patch | 27 +
.../0036-GPIO-add-named-gpio-exports.patch | 165 +++
...-MIPS-ath79-remove-irq-code-from-pci.patch | 139 +++
.../patches-4.19/0037-missing-registers.patch | 21 +
.../004-register_gpio_driver_earlier.patch | 18 +
...mtd_fix_cfi_cmdset_0002_status_check.patch | 64 +
.../404-mtd-cybertan-trx-parser.patch | 20 +
.../405-mtd-tp-link-partition-parser.patch | 25 +
.../420-net-ar71xx_mac_driver.patch | 28 +
.../430-drivers-link-spi-before-mtd.patch | 12 +
...ath79-swizzle-pci-address-for-ar71xx.patch | 98 ++
...490-usb-ehci-add-quirks-for-qca-socs.patch | 103 ++
.../900-mdio_bitbang_ignore_ta_value.patch | 32 +
...-prevent-rescheduling-during-command.patch | 61 +
.../910-unaligned_access_hacks.patch | 891 ++++++++++++++
40 files changed, 7053 insertions(+)
create mode 100644 target/linux/ath79/config-4.19
create mode 100644 target/linux/ath79/patches-4.19/0002-watchdog-ath79-fix-maximum-timeout.patch
create mode 100644 target/linux/ath79/patches-4.19/0003-leds-add-reset-controller-based-driver.patch
create mode 100644 target/linux/ath79/patches-4.19/0004-phy-add-ath79-usb-phys.patch
create mode 100644 target/linux/ath79/patches-4.19/0005-usb-add-more-OF-quirk-properties.patch
create mode 100644 target/linux/ath79/patches-4.19/0007-irqchip-irq-ath79-intc-add-irq-cascade-driver-for-QC.patch
create mode 100644 target/linux/ath79/patches-4.19/0008-irqchip-irq-ath79-cpu-drop-OF-init-helper.patch
create mode 100644 target/linux/ath79/patches-4.19/0011-MIPS-ath79-select-the-PINCTRL-subsystem.patch
create mode 100644 target/linux/ath79/patches-4.19/0017-dt-bindings-PCI-qcom-ar7100-adds-binding-doc.patch
create mode 100644 target/linux/ath79/patches-4.19/0018-MIPS-pci-ar71xx-convert-to-OF.patch
create mode 100644 target/linux/ath79/patches-4.19/0019-dt-bindings-PCI-qcom-ar7240-adds-binding-doc.patch
create mode 100644 target/linux/ath79/patches-4.19/0020-MIPS-pci-ar724x-convert-to-OF.patch
create mode 100644 target/linux/ath79/patches-4.19/0021-MIPS-ath79-add-helpers-for-setting-clocks-and-expose.patch
create mode 100644 target/linux/ath79/patches-4.19/0022-MIPS-ath79-move-legacy-wdt-and-uart-clock-aliases-ou.patch
create mode 100644 target/linux/ath79/patches-4.19/0023-MIPS-ath79-pass-PLL-base-to-clock-init-functions.patch
create mode 100644 target/linux/ath79/patches-4.19/0024-MIPS-ath79-make-specifying-the-reference-clock-in-DT.patch
create mode 100644 target/linux/ath79/patches-4.19/0025-MIPS-ath79-support-setting-up-clock-via-DT-on-all-So.patch
create mode 100644 target/linux/ath79/patches-4.19/0026-MIPS-ath79-export-switch-MDIO-reference-clock.patch
create mode 100644 target/linux/ath79/patches-4.19/0027-MIPS-ath79-drop-legacy-IRQ-code.patch
create mode 100644 target/linux/ath79/patches-4.19/0028-MIPS-ath79-drop-machfiles.patch
create mode 100644 target/linux/ath79/patches-4.19/0029-MIPS-ath79-drop-legacy-pci-code.patch
create mode 100644 target/linux/ath79/patches-4.19/0030-MIPS-ath79-drop-platform-device-registration-code.patch
create mode 100644 target/linux/ath79/patches-4.19/0031-MIPS-ath79-drop-OF-clock-code.patch
create mode 100644 target/linux/ath79/patches-4.19/0032-MIPS-ath79-sanitize-symbols.patch
create mode 100644 target/linux/ath79/patches-4.19/0033-spi-ath79-drop-pdata-support.patch
create mode 100644 target/linux/ath79/patches-4.19/0034-MIPS-ath79-ath9k-exports.patch
create mode 100644 target/linux/ath79/patches-4.19/0036-GPIO-add-named-gpio-exports.patch
create mode 100644 target/linux/ath79/patches-4.19/0036-MIPS-ath79-remove-irq-code-from-pci.patch
create mode 100644 target/linux/ath79/patches-4.19/0037-missing-registers.patch
create mode 100644 target/linux/ath79/patches-4.19/004-register_gpio_driver_earlier.patch
create mode 100644 target/linux/ath79/patches-4.19/403-mtd_fix_cfi_cmdset_0002_status_check.patch
create mode 100644 target/linux/ath79/patches-4.19/404-mtd-cybertan-trx-parser.patch
create mode 100644 target/linux/ath79/patches-4.19/405-mtd-tp-link-partition-parser.patch
create mode 100644 target/linux/ath79/patches-4.19/420-net-ar71xx_mac_driver.patch
create mode 100644 target/linux/ath79/patches-4.19/430-drivers-link-spi-before-mtd.patch
create mode 100644 target/linux/ath79/patches-4.19/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch
create mode 100644 target/linux/ath79/patches-4.19/490-usb-ehci-add-quirks-for-qca-socs.patch
create mode 100644 target/linux/ath79/patches-4.19/900-mdio_bitbang_ignore_ta_value.patch
create mode 100644 target/linux/ath79/patches-4.19/901-phy-mdio-bitbang-prevent-rescheduling-during-command.patch
create mode 100644 target/linux/ath79/patches-4.19/910-unaligned_access_hacks.patch
diff --git a/target/linux/ath79/config-4.19 b/target/linux/ath79/config-4.19
new file mode 100644
index 00000000000..6cdbb968c3b
--- /dev/null
+++ b/target/linux/ath79/config-4.19
@@ -0,0 +1,229 @@
+CONFIG_AG71XX=y
+# CONFIG_AG71XX_DEBUG is not set
+CONFIG_AG71XX_DEBUG_FS=y
+CONFIG_AR8216_PHY=y
+CONFIG_AR8216_PHY_LEDS=y
+CONFIG_ARCH_BINFMT_ELF_STATE=y
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
+CONFIG_ARCH_HAS_RESET_CONTROLLER=y
+CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MMAP_RND_BITS_MAX=15
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
+CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
+CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_ATH79=y
+CONFIG_ATH79_WDT=y
+CONFIG_CEVT_R4K=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+CONFIG_COMMON_CLK=y
+# CONFIG_COMMON_CLK_BOSTON is not set
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_CPU_GENERIC_DUMP_TLB=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_RIXI=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
+CONFIG_CPU_R4K_CACHE_TLB=y
+CONFIG_CPU_R4K_FPU=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CPU_SUPPORTS_MSA=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CSRC_R4K=y
+CONFIG_DMA_DIRECT_OPS=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NONCOHERENT_CACHE_SYNC=y
+CONFIG_DMA_NONCOHERENT_MMAP=y
+CONFIG_DMA_NONCOHERENT_OPS=y
+CONFIG_DTC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_ETHERNET_PACKET_MANGLE=y
+CONFIG_FIXED_PHY=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_LIB_ASHLDI3=y
+CONFIG_GENERIC_LIB_ASHRDI3=y
+CONFIG_GENERIC_LIB_CMPDI2=y
+CONFIG_GENERIC_LIB_LSHRDI3=y
+CONFIG_GENERIC_LIB_UCMPDI2=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PHY=y
+CONFIG_GENERIC_PINCONF=y
+CONFIG_GENERIC_PINCTRL_GROUPS=y
+CONFIG_GENERIC_PINMUX_FUNCTIONS=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIOLIB_IRQCHIP=y
+CONFIG_GPIO_74X164=y
+CONFIG_GPIO_ATH79=y
+CONFIG_GPIO_GENERIC=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+CONFIG_HAVE_ARCH_COMPILER_H=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CBPF_JIT=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_CLK_PREPARE=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_COPY_THREAD_TLS=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_RSEQ=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HW_HAS_PCI=y
+CONFIG_HZ_PERIODIC=y
+CONFIG_IMAGE_CMDLINE_HACK=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_MIPS_CPU=y
+CONFIG_IRQ_WORK=y
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_RESET is not set
+CONFIG_LIBFDT=y
+CONFIG_LOCK_DEBUGGING_SUPPORT=y
+CONFIG_MDIO_BITBANG=y
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_DEVICE=y
+CONFIG_MDIO_GPIO=y
+CONFIG_MEMFD_CREATE=y
+CONFIG_MFD_SYSCON=y
+CONFIG_MIGRATION=y
+CONFIG_MIPS=y
+CONFIG_MIPS_ASID_BITS=8
+CONFIG_MIPS_ASID_SHIFT=0
+CONFIG_MIPS_CBPF_JIT=y
+CONFIG_MIPS_CLOCK_VSYSCALL=y
+# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
+# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
+# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
+CONFIG_MIPS_CMDLINE_FROM_DTB=y
+# CONFIG_MIPS_ELF_APPENDED_DTB is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+# CONFIG_MIPS_NO_APPENDED_DTB is not set
+CONFIG_MIPS_RAW_APPENDED_DTB=y
+CONFIG_MIPS_SPRAM=y
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_M25P80=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+CONFIG_MTD_PARSER_CYBERTAN=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_SPLIT_LZMA_FW=y
+CONFIG_MTD_SPLIT_TPLINK_FW=y
+CONFIG_MTD_SPLIT_UIMAGE_FW=y
+CONFIG_MTD_TPLINK_PARTS=y
+CONFIG_MTD_VIRT_CONCAT=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
+CONFIG_NVMEM=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_KOBJ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_NET=y
+CONFIG_PCI_DRIVERS_LEGACY=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PHYLIB=y
+# CONFIG_PHY_AR7100_USB is not set
+# CONFIG_PHY_AR7200_USB is not set
+# CONFIG_PHY_ATH79_USB is not set
+CONFIG_PINCTRL=y
+CONFIG_RATIONAL=y
+CONFIG_REGMAP=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_RESET_ATH79=y
+CONFIG_RESET_CONTROLLER=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_AR933X=y
+CONFIG_SERIAL_AR933X_CONSOLE=y
+CONFIG_SERIAL_AR933X_NR_UARTS=2
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SPI=y
+CONFIG_SPI_ATH79=y
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_GPIO=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_MEM=y
+# CONFIG_SPI_RB4XX is not set
+CONFIG_SRCU=y
+CONFIG_SWCONFIG=y
+CONFIG_SWCONFIG_LEDS=y
+CONFIG_SWPHY=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_MIPS16=y
+CONFIG_SYS_SUPPORTS_ZBOOT=y
+CONFIG_SYS_SUPPORTS_ZBOOT_UART_PROM=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TINY_SRCU=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USE_OF=y
diff --git a/target/linux/ath79/patches-4.19/0002-watchdog-ath79-fix-maximum-timeout.patch b/target/linux/ath79/patches-4.19/0002-watchdog-ath79-fix-maximum-timeout.patch
new file mode 100644
index 00000000000..36234d8d83e
--- /dev/null
+++ b/target/linux/ath79/patches-4.19/0002-watchdog-ath79-fix-maximum-timeout.patch
@@ -0,0 +1,32 @@
+From 5f5c9858af167f842ee8df053920b98387a71af1 Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Mon, 5 Mar 2018 11:41:25 +0100
+Subject: [PATCH 02/27] watchdog: ath79: fix maximum timeout
+
+If the userland tries to set a timeout higher than the max_timeout,
+then we should fallback to max_timeout.
+
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ drivers/watchdog/ath79_wdt.c | 8 ++++++--
+ 1 file changed, 6 insertions(+), 2 deletions(-)
+
+--- a/drivers/watchdog/ath79_wdt.c
++++ b/drivers/watchdog/ath79_wdt.c
+@@ -115,10 +115,14 @@ static inline void ath79_wdt_disable(voi
+
+ static int ath79_wdt_set_timeout(int val)
+ {
+- if (val < 1 || val > max_timeout)
++ if (val < 1)
+ return -EINVAL;
+
+- timeout = val;
++ if (val > max_timeout)
++ timeout = max_timeout;
++ else
++ timeout = val;
++
+ ath79_wdt_keepalive();
+
+ return 0;
diff --git a/target/linux/ath79/patches-4.19/0003-leds-add-reset-controller-based-driver.patch b/target/linux/ath79/patches-4.19/0003-leds-add-reset-controller-based-driver.patch
new file mode 100644
index 00000000000..b909d57fcef
--- /dev/null
+++ b/target/linux/ath79/patches-4.19/0003-leds-add-reset-controller-based-driver.patch
@@ -0,0 +1,186 @@
+From ecbd9c87f073f097d9fe56390353e64e963e866a Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Tue, 6 Mar 2018 10:03:03 +0100
+Subject: [PATCH 03/27] leds: add reset-controller based driver
+
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ drivers/leds/Kconfig | 11 ++++
+ drivers/leds/Makefile | 1 +
+ drivers/leds/leds-reset.c | 137 ++++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 149 insertions(+)
+ create mode 100644 drivers/leds/leds-reset.c
+
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -756,6 +756,17 @@ config LEDS_NIC78BX
+ To compile this driver as a module, choose M here: the module
+ will be called leds-nic78bx.
+
++config LEDS_RESET
++ tristate "LED support for reset-controller API"
++ depends on LEDS_CLASS
++ depends on RESET_CONTROLLER
++ help
++ This option enables support for LEDs connected to pins driven by reset
++ controllers. Yes, DNI actual built HW like that.
++
++ To compile this driver as a module, choose M here: the module
++ will be called leds-reset.
++
+ comment "LED Triggers"
+ source "drivers/leds/trigger/Kconfig"
+
+--- /dev/null
++++ b/drivers/leds/leds-reset.c
+@@ -0,0 +1,140 @@
++/*
++ * Copyright (C) 2018 John Crispin <john@phrozen.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++#include <linux/err.h>
++#include <linux/reset.h>
++#include <linux/kernel.h>
++#include <linux/leds.h>
++#include <linux/module.h>
++#include <linux/of.h>
++#include <linux/platform_device.h>
++#include <linux/reset.h>
++
++struct reset_led_data {
++ struct led_classdev cdev;
++ struct reset_control *rst;
++};
++
++static inline struct reset_led_data *
++ cdev_to_reset_led_data(struct led_classdev *led_cdev)
++{
++ return container_of(led_cdev, struct reset_led_data, cdev);
++}
++
++static void reset_led_set(struct led_classdev *led_cdev,
++ enum led_brightness value)
++{
++ struct reset_led_data *led_dat = cdev_to_reset_led_data(led_cdev);
++
++ if (value == LED_OFF)
++ reset_control_assert(led_dat->rst);
++ else
++ reset_control_deassert(led_dat->rst);
++}
++
++struct reset_leds_priv {
++ int num_leds;
++ struct reset_led_data leds[];
++};
++
++static inline int sizeof_reset_leds_priv(int num_leds)
++{
++ return sizeof(struct reset_leds_priv) +
++ (sizeof(struct reset_led_data) * num_leds);
++}
++
++static struct reset_leds_priv *reset_leds_create(struct platform_device *pdev)
++{
++ struct device *dev = &pdev->dev;
++ struct fwnode_handle *child;
++ struct reset_leds_priv *priv;
++ int count, ret;
++
++ count = device_get_child_node_count(dev);
++ if (!count)
++ return ERR_PTR(-ENODEV);
++
++ priv = devm_kzalloc(dev, sizeof_reset_leds_priv(count), GFP_KERNEL);
++ if (!priv)
++ return ERR_PTR(-ENOMEM);
++
++ device_for_each_child_node(dev, child) {
++ struct reset_led_data *led = &priv->leds[priv->num_leds];
++ struct device_node *np = to_of_node(child);
++
++ ret = fwnode_property_read_string(child, "label", &led->cdev.name);
++ if (!led->cdev.name) {
++ fwnode_handle_put(child);
++ return ERR_PTR(-EINVAL);
++ }
++ led->rst = __of_reset_control_get(np, NULL, 0, 0, 0);
++ if (IS_ERR(led->rst))
++ return ERR_PTR(-EINVAL);
++
++ fwnode_property_read_string(child, "linux,default-trigger",
++ &led->cdev.default_trigger);
++
++ led->cdev.brightness_set = reset_led_set;
++ ret = devm_of_led_classdev_register(&pdev->dev, np, &led->cdev);
++ if (ret < 0)
++ return ERR_PTR(ret);
++ led->cdev.dev->of_node = np;
++ priv->num_leds++;
++ }
++
++ return priv;
++}
++
++static const struct of_device_id of_reset_leds_match[] = {
++ { .compatible = "reset-leds", },
++ {},
++};
++
++MODULE_DEVICE_TABLE(of, of_reset_leds_match);
++
++static int reset_led_probe(struct platform_device *pdev)
++{
++ struct reset_leds_priv *priv;
++
++ priv = reset_leds_create(pdev);
++ if (IS_ERR(priv))
++ return PTR_ERR(priv);
++
++ platform_set_drvdata(pdev, priv);
++
++ return 0;
++}
++
++static void reset_led_shutdown(struct platform_device *pdev)
++{
++ struct reset_leds_priv *priv = platform_get_drvdata(pdev);
++ int i;
++
++ for (i = 0; i < priv->num_leds; i++) {
++ struct reset_led_data *led = &priv->leds[i];
++
++ if (!(led->cdev.flags & LED_RETAIN_AT_SHUTDOWN))
++ reset_led_set(&led->cdev, LED_OFF);
++ }
++}
++
++static struct platform_driver reset_led_driver = {
++ .probe = reset_led_probe,
++ .shutdown = reset_led_shutdown,
++ .driver = {
++ .name = "leds-reset",
++ .of_match_table = of_reset_leds_match,
++ },
++};
++
++module_platform_driver(reset_led_driver);
++
++MODULE_AUTHOR("John Crispin <john@phrozen.org>");
++MODULE_DESCRIPTION("reset controller LED driver");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:leds-reset");
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -78,6 +78,7 @@ obj-$(CONFIG_LEDS_MT6323) += leds-mt632
+ obj-$(CONFIG_LEDS_LM3692X) += leds-lm3692x.o
+ obj-$(CONFIG_LEDS_SC27XX_BLTC) += leds-sc27xx-bltc.o
+ obj-$(CONFIG_LEDS_LM3601X) += leds-lm3601x.o
++obj-$(CONFIG_LEDS_RESET) += leds-reset.o
+
+ # LED SPI Drivers
+ obj-$(CONFIG_LEDS_CR0014114) += leds-cr0014114.o
diff --git a/target/linux/ath79/patches-4.19/0004-phy-add-ath79-usb-phys.patch b/target/linux/ath79/patches-4.19/0004-phy-add-ath79-usb-phys.patch
new file mode 100644
index 00000000000..6280baf913f
--- /dev/null
+++ b/target/linux/ath79/patches-4.19/0004-phy-add-ath79-usb-phys.patch
@@ -0,0 +1,320 @@
+From 08c9d6ceef01893678a5d2e8a15517c745417f21 Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Tue, 6 Mar 2018 10:04:05 +0100
+Subject: [PATCH 04/27] phy: add ath79 usb phys
+
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ drivers/phy/Kconfig | 16 ++++++
+ drivers/phy/Makefile | 2 +
+ drivers/phy/phy-ar7100-usb.c | 124 +++++++++++++++++++++++++++++++++++++++++++
+ drivers/phy/phy-ar7200-usb.c | 108 +++++++++++++++++++++++++++++++++++++
+ 4 files changed, 250 insertions(+)
+ create mode 100644 drivers/phy/phy-ar7100-usb.c
+ create mode 100644 drivers/phy/phy-ar7200-usb.c
+
+--- a/drivers/phy/Kconfig
++++ b/drivers/phy/Kconfig
+@@ -15,6 +15,22 @@ config GENERIC_PHY
+ phy users can obtain reference to the PHY. All the users of this
+ framework should select this config.
+
++config PHY_AR7100_USB
++ tristate "Atheros AR7100 USB PHY driver"
++ depends on ATH79 || COMPILE_TEST
++ default y if USB_EHCI_HCD_PLATFORM
++ select PHY_SIMPLE
++ help
++ Enable this to support the USB PHY on Atheros AR7100 SoCs.
++
++config PHY_AR7200_USB
++ tristate "Atheros AR7200 USB PHY driver"
++ depends on ATH79 || COMPILE_TEST
++ default y if USB_EHCI_HCD_PLATFORM
++ select PHY_SIMPLE
++ help
++ Enable this to support the USB PHY on Atheros AR7200 SoCs.
++
+ config PHY_LPC18XX_USB_OTG
+ tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver"
+ depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
+--- a/drivers/phy/Makefile
++++ b/drivers/phy/Makefile
+@@ -4,6 +4,8 @@
+ #
+
+ obj-$(CONFIG_GENERIC_PHY) += phy-core.o
++obj-$(CONFIG_PHY_AR7100_USB) += phy-ar7100-usb.o
++obj-$(CONFIG_PHY_AR7200_USB) += phy-ar7200-usb.o
+ obj-$(CONFIG_PHY_LPC18XX_USB_OTG) += phy-lpc18xx-usb-otg.o
+ obj-$(CONFIG_PHY_XGENE) += phy-xgene.o
+ obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o
+--- /dev/null
++++ b/drivers/phy/phy-ar7100-usb.c
+@@ -0,0 +1,140 @@
++/*
++ * Copyright (C) 2018 John Crispin <john@phrozen.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/phy/phy.h>
++#include <linux/delay.h>
++#include <linux/reset.h>
++#include <linux/of_gpio.h>
++
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++struct ar7100_usb_phy {
++ struct reset_control *rst_phy;
++ struct reset_control *rst_host;
++ struct reset_control *rst_ohci_dll;
++ void __iomem *io_base;
++ struct phy *phy;
++ int gpio;
++};
++
++static int ar7100_usb_phy_power_off(struct phy *phy)
++{
++ struct ar7100_usb_phy *priv = phy_get_drvdata(phy);
++ int err = 0;
++
++ err |= reset_control_assert(priv->rst_host);
++ err |= reset_control_assert(priv->rst_phy);
++ err |= reset_control_assert(priv->rst_ohci_dll);
++
++ return err;
++}
++
++static int ar7100_usb_phy_power_on(struct phy *phy)
++{
++ struct ar7100_usb_phy *priv = phy_get_drvdata(phy);
++ int err = 0;
++
++ err |= ar7100_usb_phy_power_off(phy);
++ mdelay(100);
++ err |= reset_control_deassert(priv->rst_ohci_dll);
++ err |= reset_control_deassert(priv->rst_phy);
++ err |= reset_control_deassert(priv->rst_host);
++ mdelay(500);
++ iowrite32(0xf0000, priv->io_base + AR71XX_USB_CTRL_REG_CONFIG);
++ iowrite32(0x20c00, priv->io_base + AR71XX_USB_CTRL_REG_FLADJ);
++
++ return err;
++}
++
++static const struct phy_ops ar7100_usb_phy_ops = {
++ .power_on = ar7100_usb_phy_power_on,
++ .power_off = ar7100_usb_phy_power_off,
++ .owner = THIS_MODULE,
++};
++
++static int ar7100_usb_phy_probe(struct platform_device *pdev)
++{
++ struct phy_provider *phy_provider;
++ struct resource *res;
++ struct ar7100_usb_phy *priv;
++
++ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
++ if (!priv)
++ return -ENOMEM;
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ priv->io_base = devm_ioremap_resource(&pdev->dev, res);
++ if (IS_ERR(priv->io_base))
++ return PTR_ERR(priv->io_base);
++
++ priv->rst_phy = devm_reset_control_get(&pdev->dev, "usb-phy");
++ if (IS_ERR(priv->rst_phy)) {
++ dev_err(&pdev->dev, "phy reset is missing\n");
++ return PTR_ERR(priv->rst_phy);
++ }
++
++ priv->rst_host = devm_reset_control_get(&pdev->dev, "usb-host");
++ if (IS_ERR(priv->rst_host)) {
++ dev_err(&pdev->dev, "host reset is missing\n");
++ return PTR_ERR(priv->rst_host);
++ }
++
++ priv->rst_ohci_dll = devm_reset_control_get(&pdev->dev, "usb-ohci-dll");
++ if (IS_ERR(priv->rst_ohci_dll)) {
++ dev_err(&pdev->dev, "ohci-dll reset is missing\n");
++ return PTR_ERR(priv->rst_host);
++ }
++
++ priv->phy = devm_phy_create(&pdev->dev, NULL, &ar7100_usb_phy_ops);
++ if (IS_ERR(priv->phy)) {
++ dev_err(&pdev->dev, "failed to create PHY\n");
++ return PTR_ERR(priv->phy);
++ }
++
++ priv->gpio = of_get_gpio(pdev->dev.of_node, 0);
++ if (priv->gpio >= 0) {
++ int ret = devm_gpio_request(&pdev->dev, priv->gpio, dev_name(&pdev->dev));
++
++ if (ret) {
++ dev_err(&pdev->dev, "failed to request gpio\n");
++ return ret;
++ }
++ gpio_export_with_name(priv->gpio, 0, dev_name(&pdev->dev));
++ gpio_set_value(priv->gpio, 1);
++ }
++
++ phy_set_drvdata(priv->phy, priv);
++
++ phy_provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate);
++
++
++ return PTR_ERR_OR_ZERO(phy_provider);
++}
++
++static const struct of_device_id ar7100_usb_phy_of_match[] = {
++ { .compatible = "qca,ar7100-usb-phy" },
++ {}
++};
++MODULE_DEVICE_TABLE(of, ar7100_usb_phy_of_match);
++
++static struct platform_driver ar7100_usb_phy_driver = {
++ .probe = ar7100_usb_phy_probe,
++ .driver = {
++ .of_match_table = ar7100_usb_phy_of_match,
++ .name = "ar7100-usb-phy",
++ }
++};
++module_platform_driver(ar7100_usb_phy_driver);
++
++MODULE_DESCRIPTION("ATH79 USB PHY driver");
++MODULE_AUTHOR("Alban Bedel <albeu@free.fr>");
++MODULE_LICENSE("GPL");
+--- /dev/null
++++ b/drivers/phy/phy-ar7200-usb.c
+@@ -0,0 +1,123 @@
++/*
++ * Copyright (C) 2015 Alban Bedel <albeu@free.fr>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/phy/phy.h>
++#include <linux/reset.h>
++#include <linux/of_gpio.h>
++
++struct ar7200_usb_phy {
++ struct reset_control *rst_phy;
++ struct reset_control *suspend_override;
++ struct phy *phy;
++ int gpio;
++};
++
++static int ar7200_usb_phy_power_on(struct phy *phy)
++{
++ struct ar7200_usb_phy *priv = phy_get_drvdata(phy);
++ int err = 0;
++
++ if (priv->rst_phy)
++ err = reset_control_deassert(priv->rst_phy);
++ if (!err && priv->suspend_override)
++ err = reset_control_assert(priv->suspend_override);
++ if (err && priv->rst_phy)
++ err = reset_control_assert(priv->rst_phy);
++
++ return err;
++}
++
++static int ar7200_usb_phy_power_off(struct phy *phy)
++{
++ struct ar7200_usb_phy *priv = phy_get_drvdata(phy);
++ int err = 0;
++
++ if (priv->suspend_override)
++ err = reset_control_deassert(priv->suspend_override);
++ if (priv->rst_phy)
++ err |= reset_control_assert(priv->rst_phy);
++
++ return err;
++}
++
++static const struct phy_ops ar7200_usb_phy_ops = {
++ .power_on = ar7200_usb_phy_power_on,
++ .power_off = ar7200_usb_phy_power_off,
++ .owner = THIS_MODULE,
++};
++
++static int ar7200_usb_phy_probe(struct platform_device *pdev)
++{
++ struct phy_provider *phy_provider;
++ struct ar7200_usb_phy *priv;
++
++ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
++ if (!priv)
++ return -ENOMEM;
++
++ priv->rst_phy = devm_reset_control_get(&pdev->dev, "usb-phy");
++ if (IS_ERR(priv->rst_phy)) {
++ dev_err(&pdev->dev, "phy reset is missing\n");
++ return PTR_ERR(priv->rst_phy);
++ }
++
++ priv->suspend_override = devm_reset_control_get_optional(
++ &pdev->dev, "usb-suspend-override");
++ if (IS_ERR(priv->suspend_override)) {
++ if (PTR_ERR(priv->suspend_override) == -ENOENT)
++ priv->suspend_override = NULL;
++ else
++ return PTR_ERR(priv->suspend_override);
++ }
++
++ priv->phy = devm_phy_create(&pdev->dev, NULL, &ar7200_usb_phy_ops);
++ if (IS_ERR(priv->phy)) {
++ dev_err(&pdev->dev, "failed to create PHY\n");
++ return PTR_ERR(priv->phy);
++ }
++
++ priv->gpio = of_get_gpio(pdev->dev.of_node, 0);
++ if (priv->gpio >= 0) {
++ int ret = devm_gpio_request(&pdev->dev, priv->gpio, dev_name(&pdev->dev));
++
++ if (ret) {
++ dev_err(&pdev->dev, "failed to request gpio\n");
++ return ret;
++ }
++ gpio_export_with_name(priv->gpio, 0, dev_name(&pdev->dev));
++ gpio_set_value(priv->gpio, 1);
++ }
++
++ phy_set_drvdata(priv->phy, priv);
++
++ phy_provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate);
++
++ return PTR_ERR_OR_ZERO(phy_provider);
++}
++
++static const struct of_device_id ar7200_usb_phy_of_match[] = {
++ { .compatible = "qca,ar7200-usb-phy" },
++ {}
++};
++MODULE_DEVICE_TABLE(of, ar7200_usb_phy_of_match);
++
++static struct platform_driver ar7200_usb_phy_driver = {
++ .probe = ar7200_usb_phy_probe,
++ .driver = {
++ .of_match_table = ar7200_usb_phy_of_match,
++ .name = "ar7200-usb-phy",
++ }
++};
++module_platform_driver(ar7200_usb_phy_driver);
++
++MODULE_DESCRIPTION("ATH79 USB PHY driver");
++MODULE_AUTHOR("Alban Bedel <albeu@free.fr>");
++MODULE_LICENSE("GPL");
diff --git a/target/linux/ath79/patches-4.19/0005-usb-add-more-OF-quirk-properties.patch b/target/linux/ath79/patches-4.19/0005-usb-add-more-OF-quirk-properties.patch
new file mode 100644
index 00000000000..52d77c805cf
--- /dev/null
+++ b/target/linux/ath79/patches-4.19/0005-usb-add-more-OF-quirk-properties.patch
@@ -0,0 +1,24 @@
+From 2201818e5bd33f389beceb3943fdfcf5a698fc5b Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Tue, 6 Mar 2018 10:01:43 +0100
+Subject: [PATCH 05/27] usb: add more OF/quirk properties
+
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ drivers/usb/host/ehci-platform.c | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+--- a/drivers/usb/host/ehci-platform.c
++++ b/drivers/usb/host/ehci-platform.c
+@@ -161,6 +161,11 @@ static int ehci_platform_probe(struct pl
+ ehci = hcd_to_ehci(hcd);
+
+ if (pdata == &ehci_platform_defaults && dev->dev.of_node) {
++ of_property_read_u32(dev->dev.of_node, "caps-offset", &pdata->caps_offset);
++
++ if (of_property_read_bool(dev->dev.of_node, "has-synopsys-hc-bug"))
++ pdata->has_synopsys_hc_bug = 1;
++
+ if (of_property_read_bool(dev->dev.of_node, "big-endian-regs"))
+ ehci->big_endian_mmio = 1;
+
diff --git a/target/linux/ath79/patches-4.19/0007-irqchip-irq-ath79-intc-add-irq-cascade-driver-for-QC.patch b/target/linux/ath79/patches-4.19/0007-irqchip-irq-ath79-intc-add-irq-cascade-driver-for-QC.patch
new file mode 100644
index 00000000000..bd26107af52
--- /dev/null
+++ b/target/linux/ath79/patches-4.19/0007-irqchip-irq-ath79-intc-add-irq-cascade-driver-for-QC.patch
@@ -0,0 +1,168 @@
+From f3eacff2310a60348a755c50a8da6fc251fc8587 Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Tue, 6 Mar 2018 09:55:13 +0100
+Subject: [PATCH 07/33] irqchip/irq-ath79-intc: add irq cascade driver for
+ QCA9556 SoCs
+
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ drivers/irqchip/Makefile | 1 +
+ drivers/irqchip/irq-ath79-intc.c | 142 +++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 143 insertions(+)
+ create mode 100644 drivers/irqchip/irq-ath79-intc.c
+
+--- a/drivers/irqchip/Makefile
++++ b/drivers/irqchip/Makefile
+@@ -3,6 +3,7 @@ obj-$(CONFIG_IRQCHIP) += irqchip.o
+
+ obj-$(CONFIG_ALPINE_MSI) += irq-alpine-msi.o
+ obj-$(CONFIG_ATH79) += irq-ath79-cpu.o
++obj-$(CONFIG_ATH79) += irq-ath79-intc.o
+ obj-$(CONFIG_ATH79) += irq-ath79-misc.o
+ obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2835.o
+ obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2836.o
+--- /dev/null
++++ b/drivers/irqchip/irq-ath79-intc.c
+@@ -0,0 +1,142 @@
++/*
++ * Atheros AR71xx/AR724x/AR913x specific interrupt handling
++ *
++ * Copyright (C) 2018 John Crispin <john@phrozen.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/interrupt.h>
++#include <linux/irqchip.h>
++#include <linux/of.h>
++#include <linux/of_irq.h>
++#include <linux/irqdomain.h>
++
++#include <asm/irq_cpu.h>
++#include <asm/mach-ath79/ath79.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#define ATH79_MAX_INTC_CASCADE 3
++
++struct ath79_intc {
++ struct irq_chip chip;
++ u32 irq;
++ u32 pending_mask;
++ u32 int_status;
++ u32 irq_mask[ATH79_MAX_INTC_CASCADE];
++ u32 irq_wb_chan[ATH79_MAX_INTC_CASCADE];
++};
++
++static void ath79_intc_irq_handler(struct irq_desc *desc)
++{
++ struct irq_domain *domain = irq_desc_get_handler_data(desc);
++ struct ath79_intc *intc = domain->host_data;
++ u32 pending;
++
++ pending = ath79_reset_rr(intc->int_status);
++ pending &= intc->pending_mask;
++
++ if (pending) {
++ int i;
++
++ for (i = 0; i < domain->hwirq_max; i++)
++ if (pending & intc->irq_mask[i]) {
++ if (intc->irq_wb_chan[i] != 0xffffffff)
++ ath79_ddr_wb_flush(intc->irq_wb_chan[i]);
++ generic_handle_irq(irq_find_mapping(domain, i));
++ }
++ } else {
++ spurious_interrupt();
++ }
++}
++
++static void ath79_intc_irq_enable(struct irq_data *d)
++{
++ struct ath79_intc *intc = d->domain->host_data;
++ enable_irq(intc->irq);
++}
++
++static void ath79_intc_irq_disable(struct irq_data *d)
++{
++ struct ath79_intc *intc = d->domain->host_data;
++ disable_irq(intc->irq);
++}
++
++static int ath79_intc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
++{
++ struct ath79_intc *intc = d->host_data;
++
++ irq_set_chip_and_handler(irq, &intc->chip, handle_level_irq);
++
++ return 0;
++}
++
++static const struct irq_domain_ops ath79_irq_domain_ops = {
++ .xlate = irq_domain_xlate_onecell,
++ .map = ath79_intc_map,
++};
++
++static int __init ath79_intc_of_init(
++ struct device_node *node, struct device_node *parent)
++{
++ struct irq_domain *domain;
++ struct ath79_intc *intc;
++ int cnt, cntwb, i, err;
++
++ cnt = of_property_count_u32_elems(node, "qca,pending-bits");
++ if (cnt > ATH79_MAX_INTC_CASCADE)
++ panic("Too many INTC pending bits\n");
++
++ intc = kzalloc(sizeof(*intc), GFP_KERNEL);
++ if (!intc)
++ panic("Failed to allocate INTC memory\n");
++ intc->chip = dummy_irq_chip;
++ intc->chip.name = "INTC";
++ intc->chip.irq_disable = ath79_intc_irq_disable;
++ intc->chip.irq_enable = ath79_intc_irq_enable;
++
++ if (of_property_read_u32(node, "qca,int-status-addr", &intc->int_status) < 0) {
++ panic("Missing address of interrupt status register\n");
++ }
++
++ of_property_read_u32_array(node, "qca,pending-bits", intc->irq_mask, cnt);
++ for (i = 0; i < cnt; i++) {
++ intc->pending_mask |= intc->irq_mask[i];
++ intc->irq_wb_chan[i] = 0xffffffff;
++ }
++
++ cntwb = of_count_phandle_with_args(
++ node, "qca,ddr-wb-channels", "#qca,ddr-wb-channel-cells");
++
++ for (i = 0; i < cntwb; i++) {
++ struct of_phandle_args args;
++ u32 irq = i;
++
++ of_property_read_u32_index(
++ node, "qca,ddr-wb-channel-interrupts", i, &irq);
++ if (irq >= ATH79_MAX_INTC_CASCADE)
++ continue;
++
++ err = of_parse_phandle_with_args(
++ node, "qca,ddr-wb-channels",
++ "#qca,ddr-wb-channel-cells",
++ i, &args);
++ if (err)
++ return err;
++
++ intc->irq_wb_chan[irq] = args.args[0];
++ }
++
++ intc->irq = irq_of_parse_and_map(node, 0);
++ if (!intc->irq)
++ panic("Failed to get INTC IRQ");
++
++ domain = irq_domain_add_linear(node, cnt, &ath79_irq_domain_ops, intc);
++ irq_set_chained_handler_and_data(intc->irq, ath79_intc_irq_handler, domain);
++
++ return 0;
++}
++IRQCHIP_DECLARE(ath79_intc, "qca,ar9340-intc",
++ ath79_intc_of_init);
diff --git a/target/linux/ath79/patches-4.19/0008-irqchip-irq-ath79-cpu-drop-OF-init-helper.patch b/target/linux/ath79/patches-4.19/0008-irqchip-irq-ath79-cpu-drop-OF-init-helper.patch
new file mode 100644
index 00000000000..b5ad731d06d
--- /dev/null
+++ b/target/linux/ath79/patches-4.19/0008-irqchip-irq-ath79-cpu-drop-OF-init-helper.patch
@@ -0,0 +1,23 @@
+From e029f998594f151008ecbfa024e2957edd2a5189 Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Tue, 6 Mar 2018 09:58:19 +0100
+Subject: [PATCH 08/33] irqchip/irq-ath79-cpu: drop !OF init helper
+
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ drivers/irqchip/irq-ath79-cpu.c | 7 -------
+ 1 file changed, 7 deletions(-)
+
+--- a/drivers/irqchip/irq-ath79-cpu.c
++++ b/drivers/irqchip/irq-ath79-cpu.c
+@@ -88,10 +88,3 @@ static int __init ar79_cpu_intc_of_init(
+ }
+ IRQCHIP_DECLARE(ar79_cpu_intc, "qca,ar7100-cpu-intc",
+ ar79_cpu_intc_of_init);
+-
+-void __init ath79_cpu_irq_init(unsigned irq_wb_chan2, unsigned irq_wb_chan3)
+-{
+- irq_wb_chan[2] = irq_wb_chan2;
+- irq_wb_chan[3] = irq_wb_chan3;
+- mips_cpu_irq_init();
+-}
diff --git a/target/linux/ath79/patches-4.19/0011-MIPS-ath79-select-the-PINCTRL-subsystem.patch b/target/linux/ath79/patches-4.19/0011-MIPS-ath79-select-the-PINCTRL-subsystem.patch
new file mode 100644
index 00000000000..05db5060b13
--- /dev/null
+++ b/target/linux/ath79/patches-4.19/0011-MIPS-ath79-select-the-PINCTRL-subsystem.patch
@@ -0,0 +1,24 @@
+From 0c8856211d26f84277f7fcb0b9595e5c646bc464 Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Tue, 6 Mar 2018 10:00:55 +0100
+Subject: [PATCH 11/33] MIPS: ath79: select the PINCTRL subsystem
+
+The pinmux on QCA SoCs is controlled by a single register. The
+"pinctrl-single" driver can be used but requires the target
+to select PINCTRL.
+
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ arch/mips/Kconfig | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -288,6 +288,7 @@ config BCM63XX
+ select SYS_HAS_EARLY_PRINTK
+ select SWAP_IO_SPACE
+ select GPIOLIB
++ select PINCTRL
+ select HAVE_CLK
+ select MIPS_L1_CACHE_SHIFT_4
+ select CLKDEV_LOOKUP
diff --git a/target/linux/ath79/patches-4.19/0017-dt-bindings-PCI-qcom-ar7100-adds-binding-doc.patch b/target/linux/ath79/patches-4.19/0017-dt-bindings-PCI-qcom-ar7100-adds-binding-doc.patch
new file mode 100644
index 00000000000..bf7eb691a5d
--- /dev/null
+++ b/target/linux/ath79/patches-4.19/0017-dt-bindings-PCI-qcom-ar7100-adds-binding-doc.patch
@@ -0,0 +1,57 @@
+From 4a4f869ec58ed8910b9b2e68d0eee50957e9bb20 Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Mon, 25 Jun 2018 15:52:10 +0200
+Subject: [PATCH 17/33] dt-bindings: PCI: qcom,ar7100: adds binding doc
+
+With the driver being converted from platform_data to pure OF, we need to
+also add some docs.
+
+Cc: Rob Herring <robh+dt@kernel.org>
+Cc: devicetree@vger.kernel.org
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ .../devicetree/bindings/pci/qcom,ar7100-pci.txt | 38 ++++++++++++++++++++++
+ 1 file changed, 38 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/pci/qcom,ar7100-pci.txt
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/pci/qcom,ar7100-pci.txt
+@@ -0,0 +1,38 @@
++* Qualcomm Atheros AR7100 PCI express root complex
++
++Required properties:
++- compatible: should contain "qcom,ar7100-pci" to identify the core.
++- reg: Should contain the register ranges as listed in the reg-names property.
++- reg-names: Definition: Must include the following entries
++ - "cfg_base" IO Memory
++- #address-cells: set to <3>
++- #size-cells: set to <2>
++- ranges: ranges for the PCI memory and I/O regions
++- interrupt-map-mask and interrupt-map: standard PCI
++ properties to define the mapping of the PCIe interface to interrupt
++ numbers.
++- #interrupt-cells: set to <1>
++- interrupt-controller: define to enable the builtin IRQ cascade.
++
++Optional properties:
++- interrupt-parent: phandle to the MIPS IRQ controller
++
++* Example for ar7100
++ pcie-controller@180c0000 {
++ compatible = "qca,ar7100-pci";
++ #address-cells = <3>;
++ #size-cells = <2>;
++ bus-range = <0x0 0x0>;
++ reg = <0x17010000 0x100>;
++ reg-names = "cfg_base";
++ ranges = <0x2000000 0 0x10000000 0x10000000 0 0x07000000
++ 0x1000000 0 0x00000000 0x00000000 0 0x00000001>;
++ interrupt-parent = <&cpuintc>;
++ interrupts = <2>;
++
++ interrupt-controller;
++ #interrupt-cells = <1>;
++
++ interrupt-map-mask = <0 0 0 1>;
++ interrupt-map = <0 0 0 0 &pcie0 0>;
++ };
diff --git a/target/linux/ath79/patches-4.19/0018-MIPS-pci-ar71xx-convert-to-OF.patch b/target/linux/ath79/patches-4.19/0018-MIPS-pci-ar71xx-convert-to-OF.patch
new file mode 100644
index 00000000000..91796a12f04
--- /dev/null
+++ b/target/linux/ath79/patches-4.19/0018-MIPS-pci-ar71xx-convert-to-OF.patch
@@ -0,0 +1,202 @@
+From 1855ab6b1d27f5b38a648baf57ff6a534afec26d Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Sat, 23 Jun 2018 15:07:23 +0200
+Subject: [PATCH 18/33] MIPS: pci-ar71xx: convert to OF
+
+With the ath79 target getting converted to pure OF, we can drop all the
+platform data code and add the missing OF bits to the driver. We also add
+a irq domain for the PCI/e controllers cascade, thus making it usable from
+dts files.
+
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ arch/mips/pci/pci-ar71xx.c | 82 +++++++++++++++++++++++-----------------------
+ 1 file changed, 41 insertions(+), 41 deletions(-)
+
+--- a/arch/mips/pci/pci-ar71xx.c
++++ b/arch/mips/pci/pci-ar71xx.c
+@@ -18,8 +18,11 @@
+ #include <linux/pci.h>
+ #include <linux/pci_regs.h>
+ #include <linux/interrupt.h>
++#include <linux/irqchip/chained_irq.h>
+ #include <linux/init.h>
+ #include <linux/platform_device.h>
++#include <linux/of_irq.h>
++#include <linux/of_pci.h>
+
+ #include <asm/mach-ath79/ar71xx_regs.h>
+ #include <asm/mach-ath79/ath79.h>
+@@ -49,12 +52,13 @@
+ #define AR71XX_PCI_IRQ_COUNT 5
+
+ struct ar71xx_pci_controller {
++ struct device_node *np;
+ void __iomem *cfg_base;
+ int irq;
+- int irq_base;
+ struct pci_controller pci_ctrl;
+ struct resource io_res;
+ struct resource mem_res;
++ struct irq_domain *domain;
+ };
+
+ /* Byte lane enable bits */
+@@ -228,29 +232,30 @@ static struct pci_ops ar71xx_pci_ops = {
+
+ static void ar71xx_pci_irq_handler(struct irq_desc *desc)
+ {
+- struct ar71xx_pci_controller *apc;
+ void __iomem *base = ath79_reset_base;
++ struct irq_chip *chip = irq_desc_get_chip(desc);
++ struct ar71xx_pci_controller *apc = irq_desc_get_handler_data(desc);
+ u32 pending;
+
+- apc = irq_desc_get_handler_data(desc);
+-
++ chained_irq_enter(chip, desc);
+ pending = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_STATUS) &
+ __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+
+ if (pending & AR71XX_PCI_INT_DEV0)
+- generic_handle_irq(apc->irq_base + 0);
++ generic_handle_irq(irq_linear_revmap(apc->domain, 1));
+
+ else if (pending & AR71XX_PCI_INT_DEV1)
+- generic_handle_irq(apc->irq_base + 1);
++ generic_handle_irq(irq_linear_revmap(apc->domain, 2));
+
+ else if (pending & AR71XX_PCI_INT_DEV2)
+- generic_handle_irq(apc->irq_base + 2);
++ generic_handle_irq(irq_linear_revmap(apc->domain, 3));
+
+ else if (pending & AR71XX_PCI_INT_CORE)
+- generic_handle_irq(apc->irq_base + 4);
++ generic_handle_irq(irq_linear_revmap(apc->domain, 4));
+
+ else
+ spurious_interrupt();
++ chained_irq_exit(chip, desc);
+ }
+
+ static void ar71xx_pci_irq_unmask(struct irq_data *d)
+@@ -261,7 +266,7 @@ static void ar71xx_pci_irq_unmask(struct
+ u32 t;
+
+ apc = irq_data_get_irq_chip_data(d);
+- irq = d->irq - apc->irq_base;
++ irq = irq_linear_revmap(apc->domain, d->irq);
+
+ t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+ __raw_writel(t | (1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+@@ -278,7 +283,7 @@ static void ar71xx_pci_irq_mask(struct i
+ u32 t;
+
+ apc = irq_data_get_irq_chip_data(d);
+- irq = d->irq - apc->irq_base;
++ irq = irq_linear_revmap(apc->domain, d->irq);
+
+ t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+ __raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+@@ -294,24 +299,31 @@ static struct irq_chip ar71xx_pci_irq_ch
+ .irq_mask_ack = ar71xx_pci_irq_mask,
+ };
+
++static int ar71xx_pci_irq_map(struct irq_domain *d,
++ unsigned int irq, irq_hw_number_t hw)
++{
++ struct ar71xx_pci_controller *apc = d->host_data;
++
++ irq_set_chip_and_handler(irq, &ar71xx_pci_irq_chip, handle_level_irq);
++ irq_set_chip_data(irq, apc);
++
++ return 0;
++}
++
++static const struct irq_domain_ops ar71xx_pci_domain_ops = {
++ .xlate = irq_domain_xlate_onecell,
++ .map = ar71xx_pci_irq_map,
++};
++
+ static void ar71xx_pci_irq_init(struct ar71xx_pci_controller *apc)
+ {
+ void __iomem *base = ath79_reset_base;
+- int i;
+
+ __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+ __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_STATUS);
+
+- BUILD_BUG_ON(ATH79_PCI_IRQ_COUNT < AR71XX_PCI_IRQ_COUNT);
+-
+- apc->irq_base = ATH79_PCI_IRQ_BASE;
+- for (i = apc->irq_base;
+- i < apc->irq_base + AR71XX_PCI_IRQ_COUNT; i++) {
+- irq_set_chip_and_handler(i, &ar71xx_pci_irq_chip,
+- handle_level_irq);
+- irq_set_chip_data(i, apc);
+- }
+-
++ apc->domain = irq_domain_add_linear(apc->np, AR71XX_PCI_IRQ_COUNT,
++ &ar71xx_pci_domain_ops, apc);
+ irq_set_chained_handler_and_data(apc->irq, ar71xx_pci_irq_handler,
+ apc);
+ }
+@@ -328,6 +340,11 @@ static void ar71xx_pci_reset(void)
+ mdelay(100);
+ }
+
++static const struct of_device_id ar71xx_pci_ids[] = {
++ { .compatible = "qca,ar7100-pci" },
++ {},
++};
++
+ static int ar71xx_pci_probe(struct platform_device *pdev)
+ {
+ struct ar71xx_pci_controller *apc;
+@@ -348,26 +365,6 @@ static int ar71xx_pci_probe(struct platf
+ if (apc->irq < 0)
+ return -EINVAL;
+
+- res = platform_get_resource_byname(pdev, IORESOURCE_IO, "io_base");
+- if (!res)
+- return -EINVAL;
+-
+- apc->io_res.parent = res;
+- apc->io_res.name = "PCI IO space";
+- apc->io_res.start = res->start;
+- apc->io_res.end = res->end;
+- apc->io_res.flags = IORESOURCE_IO;
+-
+- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem_base");
+- if (!res)
+- return -EINVAL;
+-
+- apc->mem_res.parent = res;
+- apc->mem_res.name = "PCI memory space";
+- apc->mem_res.start = res->start;
+- apc->mem_res.end = res->end;
+- apc->mem_res.flags = IORESOURCE_MEM;
+-
+ ar71xx_pci_reset();
+
+ /* setup COMMAND register */
+@@ -380,9 +377,11 @@ static int ar71xx_pci_probe(struct platf
+
+ ar71xx_pci_irq_init(apc);
+
++ apc->np = pdev->dev.of_node;
+ apc->pci_ctrl.pci_ops = &ar71xx_pci_ops;
+ apc->pci_ctrl.mem_resource = &apc->mem_res;
+ apc->pci_ctrl.io_resource = &apc->io_res;
++ pci_load_of_ranges(&apc->pci_ctrl, pdev->dev.of_node);
+
+ register_pci_controller(&apc->pci_ctrl);
+
+@@ -393,6 +392,7 @@ static struct platform_driver ar71xx_pci
+ .probe = ar71xx_pci_probe,
+ .driver = {
+ .name = "ar71xx-pci",
++ .of_match_table = of_match_ptr(ar71xx_pci_ids),
+ },
+ };
+
diff --git a/target/linux/ath79/patches-4.19/0019-dt-bindings-PCI-qcom-ar7240-adds-binding-doc.patch b/target/linux/ath79/patches-4.19/0019-dt-bindings-PCI-qcom-ar7240-adds-binding-doc.patch
new file mode 100644
index 00000000000..a0af79cb4da
--- /dev/null
+++ b/target/linux/ath79/patches-4.19/0019-dt-bindings-PCI-qcom-ar7240-adds-binding-doc.patch
@@ -0,0 +1,61 @@
+From ea27764bc3ef2a05decf3ae05edffc289cd0d93c Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Mon, 25 Jun 2018 15:52:02 +0200
+Subject: [PATCH 19/33] dt-bindings: PCI: qcom,ar7240: adds binding doc
+
+With the driver being converted from platform_data to pure OF, we need to
+also add some docs.
+
+Cc: Rob Herring <robh+dt@kernel.org>
+Cc: devicetree@vger.kernel.org
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ .../devicetree/bindings/pci/qcom,ar7240-pci.txt | 42 ++++++++++++++++++++++
+ 1 file changed, 42 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/pci/qcom,ar7240-pci.txt
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/pci/qcom,ar7240-pci.txt
+@@ -0,0 +1,42 @@
++* Qualcomm Atheros AR724X PCI express root complex
++
++Required properties:
++- compatible: should contain "qcom,ar7240-pci" to identify the core.
++- reg: Should contain the register ranges as listed in the reg-names property.
++- reg-names: Definition: Must include the following entries
++ - "crp_base" Configuration registers
++ - "ctrl_base" Control registers
++ - "cfg_base" IO Memory
++- #address-cells: set to <3>
++- #size-cells: set to <2>
++- ranges: ranges for the PCI memory and I/O regions
++- interrupt-map-mask and interrupt-map: standard PCI
++ properties to define the mapping of the PCIe interface to interrupt
++ numbers.
++- #interrupt-cells: set to <1>
++- interrupt-parent: phandle to the MIPS IRQ controller
++
++Optional properties:
++- interrupt-controller: define to enable the builtin IRQ cascade.
++
++* Example for qca9557
++ pcie-controller@180c0000 {
++ compatible = "qcom,ar7240-pci";
++ #address-cells = <3>;
++ #size-cells = <2>;
++ bus-range = <0x0 0x0>;
++ reg = <0x180c0000 0x1000>,
++ <0x180f0000 0x100>,
++ <0x14000000 0x1000>;
++ reg-names = "crp_base", "ctrl_base", "cfg_base";
++ ranges = <0x2000000 0 0x10000000 0x10000000 0 0x04000000
++ 0x1000000 0 0x00000000 0x00000000 0 0x00000001>;
++ interrupt-parent = <&intc2>;
++ interrupts = <1>;
++
++ interrupt-controller;
++ #interrupt-cells = <1>;
++
++ interrupt-map-mask = <0 0 0 1>;
++ interrupt-map = <0 0 0 0 &pcie0 0>;
++ };
diff --git a/target/linux/ath79/patches-4.19/0020-MIPS-pci-ar724x-convert-to-OF.patch b/target/linux/ath79/patches-4.19/0020-MIPS-pci-ar724x-convert-to-OF.patch
new file mode 100644
index 00000000000..936bfd48164
--- /dev/null
+++ b/target/linux/ath79/patches-4.19/0020-MIPS-pci-ar724x-convert-to-OF.patch
@@ -0,0 +1,205 @@
+From a522ee0199d5d3ea114ca2e211f6ac398d3e8e0b Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Sat, 23 Jun 2018 15:07:37 +0200
+Subject: [PATCH 20/33] MIPS: pci-ar724x: convert to OF
+
+With the ath79 target getting converted to pure OF, we can drop all the
+platform data code and add the missing OF bits to the driver. We also add
+a irq domain for the PCI/e controllers cascade, thus making it usable from
+dts files.
+
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ arch/mips/pci/pci-ar724x.c | 88 ++++++++++++++++++++++------------------------
+ 1 file changed, 42 insertions(+), 46 deletions(-)
+
+--- a/arch/mips/pci/pci-ar724x.c
++++ b/arch/mips/pci/pci-ar724x.c
+@@ -14,8 +14,11 @@
+ #include <linux/init.h>
+ #include <linux/delay.h>
+ #include <linux/platform_device.h>
++#include <linux/irqchip/chained_irq.h>
+ #include <asm/mach-ath79/ath79.h>
+ #include <asm/mach-ath79/ar71xx_regs.h>
++#include <linux/of_irq.h>
++#include <linux/of_pci.h>
+
+ #define AR724X_PCI_REG_APP 0x00
+ #define AR724X_PCI_REG_RESET 0x18
+@@ -45,17 +48,20 @@ struct ar724x_pci_controller {
+ void __iomem *crp_base;
+
+ int irq;
+- int irq_base;
+
+ bool link_up;
+ bool bar0_is_cached;
+ u32 bar0_value;
+
++ struct device_node *np;
+ struct pci_controller pci_controller;
++ struct irq_domain *domain;
+ struct resource io_res;
+ struct resource mem_res;
+ };
+
++static struct irq_chip ar724x_pci_irq_chip;
++
+ static inline bool ar724x_pci_check_link(struct ar724x_pci_controller *apc)
+ {
+ u32 reset;
+@@ -231,35 +237,31 @@ static struct pci_ops ar724x_pci_ops = {
+
+ static void ar724x_pci_irq_handler(struct irq_desc *desc)
+ {
+- struct ar724x_pci_controller *apc;
+- void __iomem *base;
++ struct irq_chip *chip = irq_desc_get_chip(desc);
++ struct ar724x_pci_controller *apc = irq_desc_get_handler_data(desc);
+ u32 pending;
+
+- apc = irq_desc_get_handler_data(desc);
+- base = apc->ctrl_base;
+-
+- pending = __raw_readl(base + AR724X_PCI_REG_INT_STATUS) &
+- __raw_readl(base + AR724X_PCI_REG_INT_MASK);
++ chained_irq_enter(chip, desc);
++ pending = __raw_readl(apc->ctrl_base + AR724X_PCI_REG_INT_STATUS) &
++ __raw_readl(apc->ctrl_base + AR724X_PCI_REG_INT_MASK);
+
+ if (pending & AR724X_PCI_INT_DEV0)
+- generic_handle_irq(apc->irq_base + 0);
+-
++ generic_handle_irq(irq_linear_revmap(apc->domain, 1));
+ else
+ spurious_interrupt();
++ chained_irq_exit(chip, desc);
+ }
+
+ static void ar724x_pci_irq_unmask(struct irq_data *d)
+ {
+ struct ar724x_pci_controller *apc;
+ void __iomem *base;
+- int offset;
+ u32 t;
+
+ apc = irq_data_get_irq_chip_data(d);
+ base = apc->ctrl_base;
+- offset = apc->irq_base - d->irq;
+
+- switch (offset) {
++ switch (irq_linear_revmap(apc->domain, d->irq)) {
+ case 0:
+ t = __raw_readl(base + AR724X_PCI_REG_INT_MASK);
+ __raw_writel(t | AR724X_PCI_INT_DEV0,
+@@ -273,14 +275,12 @@ static void ar724x_pci_irq_mask(struct i
+ {
+ struct ar724x_pci_controller *apc;
+ void __iomem *base;
+- int offset;
+ u32 t;
+
+ apc = irq_data_get_irq_chip_data(d);
+ base = apc->ctrl_base;
+- offset = apc->irq_base - d->irq;
+
+- switch (offset) {
++ switch (irq_linear_revmap(apc->domain, d->irq)) {
+ case 0:
+ t = __raw_readl(base + AR724X_PCI_REG_INT_MASK);
+ __raw_writel(t & ~AR724X_PCI_INT_DEV0,
+@@ -305,26 +305,34 @@ static struct irq_chip ar724x_pci_irq_ch
+ .irq_mask_ack = ar724x_pci_irq_mask,
+ };
+
++static int ar724x_pci_irq_map(struct irq_domain *d,
++ unsigned int irq, irq_hw_number_t hw)
++{
++ struct ar724x_pci_controller *apc = d->host_data;
++
++ irq_set_chip_and_handler(irq, &ar724x_pci_irq_chip, handle_level_irq);
++ irq_set_chip_data(irq, apc);
++
++ return 0;
++}
++
++static const struct irq_domain_ops ar724x_pci_domain_ops = {
++ .xlate = irq_domain_xlate_onecell,
++ .map = ar724x_pci_irq_map,
++};
++
+ static void ar724x_pci_irq_init(struct ar724x_pci_controller *apc,
+ int id)
+ {
+ void __iomem *base;
+- int i;
+
+ base = apc->ctrl_base;
+
+ __raw_writel(0, base + AR724X_PCI_REG_INT_MASK);
+ __raw_writel(0, base + AR724X_PCI_REG_INT_STATUS);
+
+- apc->irq_base = ATH79_PCI_IRQ_BASE + (id * AR724X_PCI_IRQ_COUNT);
+-
+- for (i = apc->irq_base;
+- i < apc->irq_base + AR724X_PCI_IRQ_COUNT; i++) {
+- irq_set_chip_and_handler(i, &ar724x_pci_irq_chip,
+- handle_level_irq);
+- irq_set_chip_data(i, apc);
+- }
+-
++ apc->domain = irq_domain_add_linear(apc->np, 2,
++ &ar724x_pci_domain_ops, apc);
+ irq_set_chained_handler_and_data(apc->irq, ar724x_pci_irq_handler,
+ apc);
+ }
+@@ -394,29 +402,11 @@ static int ar724x_pci_probe(struct platf
+ if (apc->irq < 0)
+ return -EINVAL;
+
+- res = platform_get_resource_byname(pdev, IORESOURCE_IO, "io_base");
+- if (!res)
+- return -EINVAL;
+-
+- apc->io_res.parent = res;
+- apc->io_res.name = "PCI IO space";
+- apc->io_res.start = res->start;
+- apc->io_res.end = res->end;
+- apc->io_res.flags = IORESOURCE_IO;
+-
+- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem_base");
+- if (!res)
+- return -EINVAL;
+-
+- apc->mem_res.parent = res;
+- apc->mem_res.name = "PCI memory space";
+- apc->mem_res.start = res->start;
+- apc->mem_res.end = res->end;
+- apc->mem_res.flags = IORESOURCE_MEM;
+-
++ apc->np = pdev->dev.of_node;
+ apc->pci_controller.pci_ops = &ar724x_pci_ops;
+ apc->pci_controller.io_resource = &apc->io_res;
+ apc->pci_controller.mem_resource = &apc->mem_res;
++ pci_load_of_ranges(&apc->pci_controller, pdev->dev.of_node);
+
+ /*
+ * Do the full PCIE Root Complex Initialization Sequence if the PCIe
+@@ -438,10 +428,16 @@ static int ar724x_pci_probe(struct platf
+ return 0;
+ }
+
++static const struct of_device_id ar724x_pci_ids[] = {
++ { .compatible = "qcom,ar7240-pci" },
++ {},
++};
++
+ static struct platform_driver ar724x_pci_driver = {
+ .probe = ar724x_pci_probe,
+ .driver = {
+ .name = "ar724x-pci",
++ .of_match_table = of_match_ptr(ar724x_pci_ids),
+ },
+ };
+
diff --git a/target/linux/ath79/patches-4.19/0021-MIPS-ath79-add-helpers-for-setting-clocks-and-expose.patch b/target/linux/ath79/patches-4.19/0021-MIPS-ath79-add-helpers-for-setting-clocks-and-expose.patch
new file mode 100644
index 00000000000..c273140dfc4
--- /dev/null
+++ b/target/linux/ath79/patches-4.19/0021-MIPS-ath79-add-helpers-for-setting-clocks-and-expose.patch
@@ -0,0 +1,243 @@
+From 288a8eb0d41f09fda242e05f8a7bd1f5b3489477 Mon Sep 17 00:00:00 2001
+From: Felix Fietkau <nbd@nbd.name>
+Date: Tue, 6 Mar 2018 13:19:26 +0100
+Subject: [PATCH 21/33] MIPS: ath79: add helpers for setting clocks and expose
+ the ref clock
+
+Preparation for transitioning the legacy clock setup code over
+to OF.
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ arch/mips/ath79/clock.c | 128 ++++++++++++++++++----------------
+ include/dt-bindings/clock/ath79-clk.h | 3 +-
+ 2 files changed, 68 insertions(+), 63 deletions(-)
+
+--- a/arch/mips/ath79/clock.c
++++ b/arch/mips/ath79/clock.c
+@@ -37,20 +37,46 @@ static struct clk_onecell_data clk_data
+ .clk_num = ARRAY_SIZE(clks),
+ };
+
+-static struct clk *__init ath79_add_sys_clkdev(
+- const char *id, unsigned long rate)
++static const char * const clk_names[ATH79_CLK_END] = {
++ [ATH79_CLK_CPU] = "cpu",
++ [ATH79_CLK_DDR] = "ddr",
++ [ATH79_CLK_AHB] = "ahb",
++ [ATH79_CLK_REF] = "ref",
++};
++
++static const char * __init ath79_clk_name(int type)
+ {
+- struct clk *clk;
+- int err;
++ BUG_ON(type >= ARRAY_SIZE(clk_names) || !clk_names[type]);
++ return clk_names[type];
++}
+
+- clk = clk_register_fixed_rate(NULL, id, NULL, 0, rate);
++static void __init __ath79_set_clk(int type, const char *name, struct clk *clk)
++{
+ if (IS_ERR(clk))
+- panic("failed to allocate %s clock structure", id);
++ panic("failed to allocate %s clock structure", clk_names[type]);
+
+- err = clk_register_clkdev(clk, id, NULL);
+- if (err)
+- panic("unable to register %s clock device", id);
++ clks[type] = clk;
++ clk_register_clkdev(clk, name, NULL);
++}
+
++static struct clk * __init ath79_set_clk(int type, unsigned long rate)
++{
++ const char *name = ath79_clk_name(type);
++ struct clk *clk;
++
++ clk = clk_register_fixed_rate(NULL, name, NULL, 0, rate);
++ __ath79_set_clk(type, name, clk);
++ return clk;
++}
++
++static struct clk * __init ath79_set_ff_clk(int type, const char *parent,
++ unsigned int mult, unsigned int div)
++{
++ const char *name = ath79_clk_name(type);
++ struct clk *clk;
++
++ clk = clk_register_fixed_factor(NULL, name, parent, 0, mult, div);
++ __ath79_set_clk(type, name, clk);
+ return clk;
+ }
+
+@@ -80,27 +106,15 @@ static void __init ar71xx_clocks_init(vo
+ div = (((pll >> AR71XX_AHB_DIV_SHIFT) & AR71XX_AHB_DIV_MASK) + 1) * 2;
+ ahb_rate = cpu_rate / div;
+
+- ath79_add_sys_clkdev("ref", ref_rate);
+- clks[ATH79_CLK_CPU] = ath79_add_sys_clkdev("cpu", cpu_rate);
+- clks[ATH79_CLK_DDR] = ath79_add_sys_clkdev("ddr", ddr_rate);
+- clks[ATH79_CLK_AHB] = ath79_add_sys_clkdev("ahb", ahb_rate);
++ ath79_set_clk(ATH79_CLK_REF, ref_rate);
++ ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
++ ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
++ ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
+
+ clk_add_alias("wdt", NULL, "ahb", NULL);
+ clk_add_alias("uart", NULL, "ahb", NULL);
+ }
+
+-static struct clk * __init ath79_reg_ffclk(const char *name,
+- const char *parent_name, unsigned int mult, unsigned int div)
+-{
+- struct clk *clk;
+-
+- clk = clk_register_fixed_factor(NULL, name, parent_name, 0, mult, div);
+- if (IS_ERR(clk))
+- panic("failed to allocate %s clock structure", name);
+-
+- return clk;
+-}
+-
+ static void __init ar724x_clk_init(struct clk *ref_clk, void __iomem *pll_base)
+ {
+ u32 pll;
+@@ -114,24 +128,19 @@ static void __init ar724x_clk_init(struc
+ ddr_div = ((pll >> AR724X_DDR_DIV_SHIFT) & AR724X_DDR_DIV_MASK) + 1;
+ ahb_div = (((pll >> AR724X_AHB_DIV_SHIFT) & AR724X_AHB_DIV_MASK) + 1) * 2;
+
+- clks[ATH79_CLK_CPU] = ath79_reg_ffclk("cpu", "ref", mult, div);
+- clks[ATH79_CLK_DDR] = ath79_reg_ffclk("ddr", "ref", mult, div * ddr_div);
+- clks[ATH79_CLK_AHB] = ath79_reg_ffclk("ahb", "ref", mult, div * ahb_div);
++ ath79_set_ff_clk(ATH79_CLK_CPU, "ref", mult, div);
++ ath79_set_ff_clk(ATH79_CLK_DDR, "ref", mult, div * ddr_div);
++ ath79_set_ff_clk(ATH79_CLK_AHB, "ref", mult, div * ahb_div);
+ }
+
+ static void __init ar724x_clocks_init(void)
+ {
+ struct clk *ref_clk;
+
+- ref_clk = ath79_add_sys_clkdev("ref", AR724X_BASE_FREQ);
++ ref_clk = ath79_set_clk(ATH79_CLK_REF, AR724X_BASE_FREQ);
+
+ ar724x_clk_init(ref_clk, ath79_pll_base);
+
+- /* just make happy plat_time_init() from arch/mips/ath79/setup.c */
+- clk_register_clkdev(clks[ATH79_CLK_CPU], "cpu", NULL);
+- clk_register_clkdev(clks[ATH79_CLK_DDR], "ddr", NULL);
+- clk_register_clkdev(clks[ATH79_CLK_AHB], "ahb", NULL);
+-
+ clk_add_alias("wdt", NULL, "ahb", NULL);
+ clk_add_alias("uart", NULL, "ahb", NULL);
+ }
+@@ -186,12 +195,12 @@ static void __init ar9330_clk_init(struc
+ AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK) + 1;
+ }
+
+- clks[ATH79_CLK_CPU] = ath79_reg_ffclk("cpu", "ref",
+- ninit_mul, ref_div * out_div * cpu_div);
+- clks[ATH79_CLK_DDR] = ath79_reg_ffclk("ddr", "ref",
+- ninit_mul, ref_div * out_div * ddr_div);
+- clks[ATH79_CLK_AHB] = ath79_reg_ffclk("ahb", "ref",
+- ninit_mul, ref_div * out_div * ahb_div);
++ ath79_set_ff_clk(ATH79_CLK_CPU, "ref", ninit_mul,
++ ref_div * out_div * cpu_div);
++ ath79_set_ff_clk(ATH79_CLK_DDR, "ref", ninit_mul,
++ ref_div * out_div * ddr_div);
++ ath79_set_ff_clk(ATH79_CLK_AHB, "ref", ninit_mul,
++ ref_div * out_div * ahb_div);
+ }
+
+ static void __init ar933x_clocks_init(void)
+@@ -206,15 +215,10 @@ static void __init ar933x_clocks_init(vo
+ else
+ ref_rate = (25 * 1000 * 1000);
+
+- ref_clk = ath79_add_sys_clkdev("ref", ref_rate);
++ ref_clk = ath79_set_clk(ATH79_CLK_REF, ref_rate);
+
+ ar9330_clk_init(ref_clk, ath79_pll_base);
+
+- /* just make happy plat_time_init() from arch/mips/ath79/setup.c */
+- clk_register_clkdev(clks[ATH79_CLK_CPU], "cpu", NULL);
+- clk_register_clkdev(clks[ATH79_CLK_DDR], "ddr", NULL);
+- clk_register_clkdev(clks[ATH79_CLK_AHB], "ahb", NULL);
+-
+ clk_add_alias("wdt", NULL, "ahb", NULL);
+ clk_add_alias("uart", NULL, "ref", NULL);
+ }
+@@ -344,10 +348,10 @@ static void __init ar934x_clocks_init(vo
+ else
+ ahb_rate = cpu_pll / (postdiv + 1);
+
+- ath79_add_sys_clkdev("ref", ref_rate);
+- clks[ATH79_CLK_CPU] = ath79_add_sys_clkdev("cpu", cpu_rate);
+- clks[ATH79_CLK_DDR] = ath79_add_sys_clkdev("ddr", ddr_rate);
+- clks[ATH79_CLK_AHB] = ath79_add_sys_clkdev("ahb", ahb_rate);
++ ath79_set_clk(ATH79_CLK_REF, ref_rate);
++ ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
++ ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
++ ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
+
+ clk_add_alias("wdt", NULL, "ref", NULL);
+ clk_add_alias("uart", NULL, "ref", NULL);
+@@ -431,10 +435,10 @@ static void __init qca953x_clocks_init(v
+ else
+ ahb_rate = cpu_pll / (postdiv + 1);
+
+- ath79_add_sys_clkdev("ref", ref_rate);
+- ath79_add_sys_clkdev("cpu", cpu_rate);
+- ath79_add_sys_clkdev("ddr", ddr_rate);
+- ath79_add_sys_clkdev("ahb", ahb_rate);
++ ath79_set_clk(ATH79_CLK_REF, ref_rate);
++ ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
++ ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
++ ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
+
+ clk_add_alias("wdt", NULL, "ref", NULL);
+ clk_add_alias("uart", NULL, "ref", NULL);
+@@ -516,10 +520,10 @@ static void __init qca955x_clocks_init(v
+ else
+ ahb_rate = cpu_pll / (postdiv + 1);
+
+- ath79_add_sys_clkdev("ref", ref_rate);
+- clks[ATH79_CLK_CPU] = ath79_add_sys_clkdev("cpu", cpu_rate);
+- clks[ATH79_CLK_DDR] = ath79_add_sys_clkdev("ddr", ddr_rate);
+- clks[ATH79_CLK_AHB] = ath79_add_sys_clkdev("ahb", ahb_rate);
++ ath79_set_clk(ATH79_CLK_REF, ref_rate);
++ ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
++ ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
++ ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
+
+ clk_add_alias("wdt", NULL, "ref", NULL);
+ clk_add_alias("uart", NULL, "ref", NULL);
+@@ -620,10 +624,10 @@ static void __init qca956x_clocks_init(v
+ else
+ ahb_rate = cpu_pll / (postdiv + 1);
+
+- ath79_add_sys_clkdev("ref", ref_rate);
+- ath79_add_sys_clkdev("cpu", cpu_rate);
+- ath79_add_sys_clkdev("ddr", ddr_rate);
+- ath79_add_sys_clkdev("ahb", ahb_rate);
++ ath79_set_clk(ATH79_CLK_REF, ref_rate);
++ ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
++ ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
++ ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
+
+ clk_add_alias("wdt", NULL, "ref", NULL);
+ clk_add_alias("uart", NULL, "ref", NULL);
+--- a/include/dt-bindings/clock/ath79-clk.h
++++ b/include/dt-bindings/clock/ath79-clk.h
+@@ -13,7 +13,8 @@
+ #define ATH79_CLK_CPU 0
+ #define ATH79_CLK_DDR 1
+ #define ATH79_CLK_AHB 2
++#define ATH79_CLK_REF 3
+
+-#define ATH79_CLK_END 3
++#define ATH79_CLK_END 4
+
+ #endif /* __DT_BINDINGS_ATH79_CLK_H */
diff --git a/target/linux/ath79/patches-4.19/0022-MIPS-ath79-move-legacy-wdt-and-uart-clock-aliases-ou.patch b/target/linux/ath79/patches-4.19/0022-MIPS-ath79-move-legacy-wdt-and-uart-clock-aliases-ou.patch
new file mode 100644
index 00000000000..389edc45a84
--- /dev/null
+++ b/target/linux/ath79/patches-4.19/0022-MIPS-ath79-move-legacy-wdt-and-uart-clock-aliases-ou.patch
@@ -0,0 +1,114 @@
+From 339c191a95e978353c9ba3aafab0261e14de109b Mon Sep 17 00:00:00 2001
+From: Felix Fietkau <nbd@nbd.name>
+Date: Tue, 6 Mar 2018 13:22:43 +0100
+Subject: [PATCH 22/33] MIPS: ath79: move legacy "wdt" and "uart" clock aliases
+ out of soc init
+
+Preparation for reusing functions for DT
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ arch/mips/ath79/clock.c | 38 +++++++++++++++++---------------------
+ 1 file changed, 17 insertions(+), 21 deletions(-)
+
+--- a/arch/mips/ath79/clock.c
++++ b/arch/mips/ath79/clock.c
+@@ -110,9 +110,6 @@ static void __init ar71xx_clocks_init(vo
+ ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
+ ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
+ ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
+-
+- clk_add_alias("wdt", NULL, "ahb", NULL);
+- clk_add_alias("uart", NULL, "ahb", NULL);
+ }
+
+ static void __init ar724x_clk_init(struct clk *ref_clk, void __iomem *pll_base)
+@@ -140,9 +137,6 @@ static void __init ar724x_clocks_init(vo
+ ref_clk = ath79_set_clk(ATH79_CLK_REF, AR724X_BASE_FREQ);
+
+ ar724x_clk_init(ref_clk, ath79_pll_base);
+-
+- clk_add_alias("wdt", NULL, "ahb", NULL);
+- clk_add_alias("uart", NULL, "ahb", NULL);
+ }
+
+ static void __init ar9330_clk_init(struct clk *ref_clk, void __iomem *pll_base)
+@@ -218,9 +212,6 @@ static void __init ar933x_clocks_init(vo
+ ref_clk = ath79_set_clk(ATH79_CLK_REF, ref_rate);
+
+ ar9330_clk_init(ref_clk, ath79_pll_base);
+-
+- clk_add_alias("wdt", NULL, "ahb", NULL);
+- clk_add_alias("uart", NULL, "ref", NULL);
+ }
+
+ static u32 __init ar934x_get_pll_freq(u32 ref, u32 ref_div, u32 nint, u32 nfrac,
+@@ -353,9 +344,6 @@ static void __init ar934x_clocks_init(vo
+ ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
+ ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
+
+- clk_add_alias("wdt", NULL, "ref", NULL);
+- clk_add_alias("uart", NULL, "ref", NULL);
+-
+ iounmap(dpll_base);
+ }
+
+@@ -439,9 +427,6 @@ static void __init qca953x_clocks_init(v
+ ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
+ ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
+ ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
+-
+- clk_add_alias("wdt", NULL, "ref", NULL);
+- clk_add_alias("uart", NULL, "ref", NULL);
+ }
+
+ static void __init qca955x_clocks_init(void)
+@@ -524,9 +509,6 @@ static void __init qca955x_clocks_init(v
+ ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
+ ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
+ ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
+-
+- clk_add_alias("wdt", NULL, "ref", NULL);
+- clk_add_alias("uart", NULL, "ref", NULL);
+ }
+
+ static void __init qca956x_clocks_init(void)
+@@ -628,13 +610,13 @@ static void __init qca956x_clocks_init(v
+ ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
+ ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
+ ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
+-
+- clk_add_alias("wdt", NULL, "ref", NULL);
+- clk_add_alias("uart", NULL, "ref", NULL);
+ }
+
+ void __init ath79_clocks_init(void)
+ {
++ const char *wdt;
++ const char *uart;
++
+ if (soc_is_ar71xx())
+ ar71xx_clocks_init();
+ else if (soc_is_ar724x() || soc_is_ar913x())
+@@ -651,6 +633,20 @@ void __init ath79_clocks_init(void)
+ qca956x_clocks_init();
+ else
+ BUG();
++
++ if (soc_is_ar71xx() || soc_is_ar724x() || soc_is_ar913x()) {
++ wdt = "ahb";
++ uart = "ahb";
++ } else if (soc_is_ar933x()) {
++ wdt = "ahb";
++ uart = "ref";
++ } else {
++ wdt = "ref";
++ uart = "ref";
++ }
++
++ clk_add_alias("wdt", NULL, wdt, NULL);
++ clk_add_alias("uart", NULL, uart, NULL);
+ }
+
+ unsigned long __init
diff --git a/target/linux/ath79/patches-4.19/0023-MIPS-ath79-pass-PLL-base-to-clock-init-functions.patch b/target/linux/ath79/patches-4.19/0023-MIPS-ath79-pass-PLL-base-to-clock-init-functions.patch
new file mode 100644
index 00000000000..6c0f2ad54c5
--- /dev/null
+++ b/target/linux/ath79/patches-4.19/0023-MIPS-ath79-pass-PLL-base-to-clock-init-functions.patch
@@ -0,0 +1,242 @@
+From 6350b2c36c522fecbc91a80b63f49319dafd2a72 Mon Sep 17 00:00:00 2001
+From: Felix Fietkau <nbd@nbd.name>
+Date: Tue, 6 Mar 2018 13:23:20 +0100
+Subject: [PATCH 23/33] MIPS: ath79: pass PLL base to clock init functions
+
+Preparation for passing the mapped base via DT
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ arch/mips/ath79/clock.c | 60 ++++++++++++++++++++++++-------------------------
+ 1 file changed, 30 insertions(+), 30 deletions(-)
+
+--- a/arch/mips/ath79/clock.c
++++ b/arch/mips/ath79/clock.c
+@@ -80,7 +80,7 @@ static struct clk * __init ath79_set_ff_
+ return clk;
+ }
+
+-static void __init ar71xx_clocks_init(void)
++static void __init ar71xx_clocks_init(void __iomem *pll_base)
+ {
+ unsigned long ref_rate;
+ unsigned long cpu_rate;
+@@ -92,7 +92,7 @@ static void __init ar71xx_clocks_init(vo
+
+ ref_rate = AR71XX_BASE_FREQ;
+
+- pll = ath79_pll_rr(AR71XX_PLL_REG_CPU_CONFIG);
++ pll = __raw_readl(pll_base + AR71XX_PLL_REG_CPU_CONFIG);
+
+ div = ((pll >> AR71XX_PLL_FB_SHIFT) & AR71XX_PLL_FB_MASK) + 1;
+ freq = div * ref_rate;
+@@ -130,13 +130,13 @@ static void __init ar724x_clk_init(struc
+ ath79_set_ff_clk(ATH79_CLK_AHB, "ref", mult, div * ahb_div);
+ }
+
+-static void __init ar724x_clocks_init(void)
++static void __init ar724x_clocks_init(void __iomem *pll_base)
+ {
+ struct clk *ref_clk;
+
+ ref_clk = ath79_set_clk(ATH79_CLK_REF, AR724X_BASE_FREQ);
+
+- ar724x_clk_init(ref_clk, ath79_pll_base);
++ ar724x_clk_init(ref_clk, pll_base);
+ }
+
+ static void __init ar9330_clk_init(struct clk *ref_clk, void __iomem *pll_base)
+@@ -197,7 +197,7 @@ static void __init ar9330_clk_init(struc
+ ref_div * out_div * ahb_div);
+ }
+
+-static void __init ar933x_clocks_init(void)
++static void __init ar933x_clocks_init(void __iomem *pll_base)
+ {
+ struct clk *ref_clk;
+ unsigned long ref_rate;
+@@ -234,7 +234,7 @@ static u32 __init ar934x_get_pll_freq(u3
+ return ret;
+ }
+
+-static void __init ar934x_clocks_init(void)
++static void __init ar934x_clocks_init(void __iomem *pll_base)
+ {
+ unsigned long ref_rate;
+ unsigned long cpu_rate;
+@@ -265,7 +265,7 @@ static void __init ar934x_clocks_init(vo
+ AR934X_SRIF_DPLL1_REFDIV_MASK;
+ frac = 1 << 18;
+ } else {
+- pll = ath79_pll_rr(AR934X_PLL_CPU_CONFIG_REG);
++ pll = __raw_readl(pll_base + AR934X_PLL_CPU_CONFIG_REG);
+ out_div = (pll >> AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
+ AR934X_PLL_CPU_CONFIG_OUTDIV_MASK;
+ ref_div = (pll >> AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
+@@ -292,7 +292,7 @@ static void __init ar934x_clocks_init(vo
+ AR934X_SRIF_DPLL1_REFDIV_MASK;
+ frac = 1 << 18;
+ } else {
+- pll = ath79_pll_rr(AR934X_PLL_DDR_CONFIG_REG);
++ pll = __raw_readl(pll_base + AR934X_PLL_DDR_CONFIG_REG);
+ out_div = (pll >> AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
+ AR934X_PLL_DDR_CONFIG_OUTDIV_MASK;
+ ref_div = (pll >> AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
+@@ -307,7 +307,7 @@ static void __init ar934x_clocks_init(vo
+ ddr_pll = ar934x_get_pll_freq(ref_rate, ref_div, nint,
+ nfrac, frac, out_div);
+
+- clk_ctrl = ath79_pll_rr(AR934X_PLL_CPU_DDR_CLK_CTRL_REG);
++ clk_ctrl = __raw_readl(pll_base + AR934X_PLL_CPU_DDR_CLK_CTRL_REG);
+
+ postdiv = (clk_ctrl >> AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_SHIFT) &
+ AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_MASK;
+@@ -347,7 +347,7 @@ static void __init ar934x_clocks_init(vo
+ iounmap(dpll_base);
+ }
+
+-static void __init qca953x_clocks_init(void)
++static void __init qca953x_clocks_init(void __iomem *pll_base)
+ {
+ unsigned long ref_rate;
+ unsigned long cpu_rate;
+@@ -363,7 +363,7 @@ static void __init qca953x_clocks_init(v
+ else
+ ref_rate = 25 * 1000 * 1000;
+
+- pll = ath79_pll_rr(QCA953X_PLL_CPU_CONFIG_REG);
++ pll = __raw_readl(pll_base + QCA953X_PLL_CPU_CONFIG_REG);
+ out_div = (pll >> QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
+ QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK;
+ ref_div = (pll >> QCA953X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
+@@ -377,7 +377,7 @@ static void __init qca953x_clocks_init(v
+ cpu_pll += frac * (ref_rate >> 6) / ref_div;
+ cpu_pll /= (1 << out_div);
+
+- pll = ath79_pll_rr(QCA953X_PLL_DDR_CONFIG_REG);
++ pll = __raw_readl(pll_base + QCA953X_PLL_DDR_CONFIG_REG);
+ out_div = (pll >> QCA953X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
+ QCA953X_PLL_DDR_CONFIG_OUTDIV_MASK;
+ ref_div = (pll >> QCA953X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
+@@ -391,7 +391,7 @@ static void __init qca953x_clocks_init(v
+ ddr_pll += frac * (ref_rate >> 6) / (ref_div << 4);
+ ddr_pll /= (1 << out_div);
+
+- clk_ctrl = ath79_pll_rr(QCA953X_PLL_CLK_CTRL_REG);
++ clk_ctrl = __raw_readl(pll_base + QCA953X_PLL_CLK_CTRL_REG);
+
+ postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
+ QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
+@@ -429,7 +429,7 @@ static void __init qca953x_clocks_init(v
+ ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
+ }
+
+-static void __init qca955x_clocks_init(void)
++static void __init qca955x_clocks_init(void __iomem *pll_base)
+ {
+ unsigned long ref_rate;
+ unsigned long cpu_rate;
+@@ -445,7 +445,7 @@ static void __init qca955x_clocks_init(v
+ else
+ ref_rate = 25 * 1000 * 1000;
+
+- pll = ath79_pll_rr(QCA955X_PLL_CPU_CONFIG_REG);
++ pll = __raw_readl(pll_base + QCA955X_PLL_CPU_CONFIG_REG);
+ out_div = (pll >> QCA955X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
+ QCA955X_PLL_CPU_CONFIG_OUTDIV_MASK;
+ ref_div = (pll >> QCA955X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
+@@ -459,7 +459,7 @@ static void __init qca955x_clocks_init(v
+ cpu_pll += frac * ref_rate / (ref_div * (1 << 6));
+ cpu_pll /= (1 << out_div);
+
+- pll = ath79_pll_rr(QCA955X_PLL_DDR_CONFIG_REG);
++ pll = __raw_readl(pll_base + QCA955X_PLL_DDR_CONFIG_REG);
+ out_div = (pll >> QCA955X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
+ QCA955X_PLL_DDR_CONFIG_OUTDIV_MASK;
+ ref_div = (pll >> QCA955X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
+@@ -473,7 +473,7 @@ static void __init qca955x_clocks_init(v
+ ddr_pll += frac * ref_rate / (ref_div * (1 << 10));
+ ddr_pll /= (1 << out_div);
+
+- clk_ctrl = ath79_pll_rr(QCA955X_PLL_CLK_CTRL_REG);
++ clk_ctrl = __raw_readl(pll_base + QCA955X_PLL_CLK_CTRL_REG);
+
+ postdiv = (clk_ctrl >> QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
+ QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
+@@ -511,7 +511,7 @@ static void __init qca955x_clocks_init(v
+ ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
+ }
+
+-static void __init qca956x_clocks_init(void)
++static void __init qca956x_clocks_init(void __iomem *pll_base)
+ {
+ unsigned long ref_rate;
+ unsigned long cpu_rate;
+@@ -537,13 +537,13 @@ static void __init qca956x_clocks_init(v
+ else
+ ref_rate = 25 * 1000 * 1000;
+
+- pll = ath79_pll_rr(QCA956X_PLL_CPU_CONFIG_REG);
++ pll = __raw_readl(pll_base + QCA956X_PLL_CPU_CONFIG_REG);
+ out_div = (pll >> QCA956X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
+ QCA956X_PLL_CPU_CONFIG_OUTDIV_MASK;
+ ref_div = (pll >> QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
+ QCA956X_PLL_CPU_CONFIG_REFDIV_MASK;
+
+- pll = ath79_pll_rr(QCA956X_PLL_CPU_CONFIG1_REG);
++ pll = __raw_readl(pll_base + QCA956X_PLL_CPU_CONFIG1_REG);
+ nint = (pll >> QCA956X_PLL_CPU_CONFIG1_NINT_SHIFT) &
+ QCA956X_PLL_CPU_CONFIG1_NINT_MASK;
+ hfrac = (pll >> QCA956X_PLL_CPU_CONFIG1_NFRAC_H_SHIFT) &
+@@ -556,12 +556,12 @@ static void __init qca956x_clocks_init(v
+ cpu_pll += (hfrac >> 13) * ref_rate / ref_div;
+ cpu_pll /= (1 << out_div);
+
+- pll = ath79_pll_rr(QCA956X_PLL_DDR_CONFIG_REG);
++ pll = __raw_readl(pll_base + QCA956X_PLL_DDR_CONFIG_REG);
+ out_div = (pll >> QCA956X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
+ QCA956X_PLL_DDR_CONFIG_OUTDIV_MASK;
+ ref_div = (pll >> QCA956X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
+ QCA956X_PLL_DDR_CONFIG_REFDIV_MASK;
+- pll = ath79_pll_rr(QCA956X_PLL_DDR_CONFIG1_REG);
++ pll = __raw_readl(pll_base + QCA956X_PLL_DDR_CONFIG1_REG);
+ nint = (pll >> QCA956X_PLL_DDR_CONFIG1_NINT_SHIFT) &
+ QCA956X_PLL_DDR_CONFIG1_NINT_MASK;
+ hfrac = (pll >> QCA956X_PLL_DDR_CONFIG1_NFRAC_H_SHIFT) &
+@@ -574,7 +574,7 @@ static void __init qca956x_clocks_init(v
+ ddr_pll += (hfrac >> 13) * ref_rate / ref_div;
+ ddr_pll /= (1 << out_div);
+
+- clk_ctrl = ath79_pll_rr(QCA956X_PLL_CLK_CTRL_REG);
++ clk_ctrl = __raw_readl(pll_base + QCA956X_PLL_CLK_CTRL_REG);
+
+ postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
+ QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
+@@ -618,19 +618,19 @@ void __init ath79_clocks_init(void)
+ const char *uart;
+
+ if (soc_is_ar71xx())
+- ar71xx_clocks_init();
++ ar71xx_clocks_init(ath79_pll_base);
+ else if (soc_is_ar724x() || soc_is_ar913x())
+- ar724x_clocks_init();
++ ar724x_clocks_init(ath79_pll_base);
+ else if (soc_is_ar933x())
+- ar933x_clocks_init();
++ ar933x_clocks_init(ath79_pll_base);
+ else if (soc_is_ar934x())
+- ar934x_clocks_init();
++ ar934x_clocks_init(ath79_pll_base);
+ else if (soc_is_qca953x())
+- qca953x_clocks_init();
++ qca953x_clocks_init(ath79_pll_base);
+ else if (soc_is_qca955x())
+- qca955x_clocks_init();
++ qca955x_clocks_init(ath79_pll_base);
+ else if (soc_is_qca956x() || soc_is_tp9343())
+- qca956x_clocks_init();
++ qca956x_clocks_init(ath79_pll_base);
+ else
+ BUG();
+
diff --git a/target/linux/ath79/patches-4.19/0024-MIPS-ath79-make-specifying-the-reference-clock-in-DT.patch b/target/linux/ath79/patches-4.19/0024-MIPS-ath79-make-specifying-the-reference-clock-in-DT.patch
new file mode 100644
index 00000000000..9ceb6438039
--- /dev/null
+++ b/target/linux/ath79/patches-4.19/0024-MIPS-ath79-make-specifying-the-reference-clock-in-DT.patch
@@ -0,0 +1,229 @@
+From 5fadb2544ed0bb72ddddd846aa303bb9ed2d211c Mon Sep 17 00:00:00 2001
+From: Felix Fietkau <nbd@nbd.name>
+Date: Tue, 6 Mar 2018 13:24:07 +0100
+Subject: [PATCH 24/33] MIPS: ath79: make specifying the reference clock in DT
+ optional
+
+It can be autodetected for many SoCs using the strapping options.
+If the clock is specified in DT, the autodetected value is ignored
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ arch/mips/ath79/clock.c | 84 +++++++++++++++++++++++--------------------------
+ 1 file changed, 40 insertions(+), 44 deletions(-)
+
+--- a/arch/mips/ath79/clock.c
++++ b/arch/mips/ath79/clock.c
+@@ -80,6 +80,18 @@ static struct clk * __init ath79_set_ff_
+ return clk;
+ }
+
++static unsigned long __init ath79_setup_ref_clk(unsigned long rate)
++{
++ struct clk *clk = clks[ATH79_CLK_REF];
++
++ if (clk)
++ rate = clk_get_rate(clk);
++ else
++ clk = ath79_set_clk(ATH79_CLK_REF, rate);
++
++ return rate;
++}
++
+ static void __init ar71xx_clocks_init(void __iomem *pll_base)
+ {
+ unsigned long ref_rate;
+@@ -90,7 +102,7 @@ static void __init ar71xx_clocks_init(vo
+ u32 freq;
+ u32 div;
+
+- ref_rate = AR71XX_BASE_FREQ;
++ ref_rate = ath79_setup_ref_clk(AR71XX_BASE_FREQ);
+
+ pll = __raw_readl(pll_base + AR71XX_PLL_REG_CPU_CONFIG);
+
+@@ -106,16 +118,17 @@ static void __init ar71xx_clocks_init(vo
+ div = (((pll >> AR71XX_AHB_DIV_SHIFT) & AR71XX_AHB_DIV_MASK) + 1) * 2;
+ ahb_rate = cpu_rate / div;
+
+- ath79_set_clk(ATH79_CLK_REF, ref_rate);
+ ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
+ ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
+ ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
+ }
+
+-static void __init ar724x_clk_init(struct clk *ref_clk, void __iomem *pll_base)
++static void __init ar724x_clocks_init(void __iomem *pll_base)
+ {
+- u32 pll;
+ u32 mult, div, ddr_div, ahb_div;
++ u32 pll;
++
++ ath79_setup_ref_clk(AR71XX_BASE_FREQ);
+
+ pll = __raw_readl(pll_base + AR724X_PLL_REG_CPU_CONFIG);
+
+@@ -130,17 +143,9 @@ static void __init ar724x_clk_init(struc
+ ath79_set_ff_clk(ATH79_CLK_AHB, "ref", mult, div * ahb_div);
+ }
+
+-static void __init ar724x_clocks_init(void __iomem *pll_base)
+-{
+- struct clk *ref_clk;
+-
+- ref_clk = ath79_set_clk(ATH79_CLK_REF, AR724X_BASE_FREQ);
+-
+- ar724x_clk_init(ref_clk, pll_base);
+-}
+-
+-static void __init ar9330_clk_init(struct clk *ref_clk, void __iomem *pll_base)
++static void __init ar933x_clocks_init(void __iomem *pll_base)
+ {
++ unsigned long ref_rate;
+ u32 clock_ctrl;
+ u32 ref_div;
+ u32 ninit_mul;
+@@ -149,6 +154,15 @@ static void __init ar9330_clk_init(struc
+ u32 cpu_div;
+ u32 ddr_div;
+ u32 ahb_div;
++ u32 t;
++
++ t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
++ if (t & AR933X_BOOTSTRAP_REF_CLK_40)
++ ref_rate = (40 * 1000 * 1000);
++ else
++ ref_rate = (25 * 1000 * 1000);
++
++ ath79_setup_ref_clk(ref_rate);
+
+ clock_ctrl = __raw_readl(pll_base + AR933X_PLL_CLOCK_CTRL_REG);
+ if (clock_ctrl & AR933X_PLL_CLOCK_CTRL_BYPASS) {
+@@ -197,23 +211,6 @@ static void __init ar9330_clk_init(struc
+ ref_div * out_div * ahb_div);
+ }
+
+-static void __init ar933x_clocks_init(void __iomem *pll_base)
+-{
+- struct clk *ref_clk;
+- unsigned long ref_rate;
+- u32 t;
+-
+- t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
+- if (t & AR933X_BOOTSTRAP_REF_CLK_40)
+- ref_rate = (40 * 1000 * 1000);
+- else
+- ref_rate = (25 * 1000 * 1000);
+-
+- ref_clk = ath79_set_clk(ATH79_CLK_REF, ref_rate);
+-
+- ar9330_clk_init(ref_clk, ath79_pll_base);
+-}
+-
+ static u32 __init ar934x_get_pll_freq(u32 ref, u32 ref_div, u32 nint, u32 nfrac,
+ u32 frac, u32 out_div)
+ {
+@@ -253,6 +250,8 @@ static void __init ar934x_clocks_init(vo
+ else
+ ref_rate = 25 * 1000 * 1000;
+
++ ref_rate = ath79_setup_ref_clk(ref_rate);
++
+ pll = __raw_readl(dpll_base + AR934X_SRIF_CPU_DPLL2_REG);
+ if (pll & AR934X_SRIF_DPLL2_LOCAL_PLL) {
+ out_div = (pll >> AR934X_SRIF_DPLL2_OUTDIV_SHIFT) &
+@@ -339,7 +338,6 @@ static void __init ar934x_clocks_init(vo
+ else
+ ahb_rate = cpu_pll / (postdiv + 1);
+
+- ath79_set_clk(ATH79_CLK_REF, ref_rate);
+ ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
+ ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
+ ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
+@@ -363,6 +361,8 @@ static void __init qca953x_clocks_init(v
+ else
+ ref_rate = 25 * 1000 * 1000;
+
++ ref_rate = ath79_setup_ref_clk(ref_rate);
++
+ pll = __raw_readl(pll_base + QCA953X_PLL_CPU_CONFIG_REG);
+ out_div = (pll >> QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
+ QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK;
+@@ -423,7 +423,6 @@ static void __init qca953x_clocks_init(v
+ else
+ ahb_rate = cpu_pll / (postdiv + 1);
+
+- ath79_set_clk(ATH79_CLK_REF, ref_rate);
+ ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
+ ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
+ ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
+@@ -445,6 +444,8 @@ static void __init qca955x_clocks_init(v
+ else
+ ref_rate = 25 * 1000 * 1000;
+
++ ref_rate = ath79_setup_ref_clk(ref_rate);
++
+ pll = __raw_readl(pll_base + QCA955X_PLL_CPU_CONFIG_REG);
+ out_div = (pll >> QCA955X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
+ QCA955X_PLL_CPU_CONFIG_OUTDIV_MASK;
+@@ -505,7 +506,6 @@ static void __init qca955x_clocks_init(v
+ else
+ ahb_rate = cpu_pll / (postdiv + 1);
+
+- ath79_set_clk(ATH79_CLK_REF, ref_rate);
+ ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
+ ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
+ ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
+@@ -537,6 +537,8 @@ static void __init qca956x_clocks_init(v
+ else
+ ref_rate = 25 * 1000 * 1000;
+
++ ref_rate = ath79_setup_ref_clk(ref_rate);
++
+ pll = __raw_readl(pll_base + QCA956X_PLL_CPU_CONFIG_REG);
+ out_div = (pll >> QCA956X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
+ QCA956X_PLL_CPU_CONFIG_OUTDIV_MASK;
+@@ -606,7 +608,6 @@ static void __init qca956x_clocks_init(v
+ else
+ ahb_rate = cpu_pll / (postdiv + 1);
+
+- ath79_set_clk(ATH79_CLK_REF, ref_rate);
+ ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
+ ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
+ ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
+@@ -682,10 +683,8 @@ static void __init ath79_clocks_init_dt_
+ void __iomem *pll_base;
+
+ ref_clk = of_clk_get(np, 0);
+- if (IS_ERR(ref_clk)) {
+- pr_err("%pOF: of_clk_get failed\n", np);
+- goto err;
+- }
++ if (!IS_ERR(ref_clk))
++ clks[ATH79_CLK_REF] = ref_clk;
+
+ pll_base = of_iomap(np, 0);
+ if (!pll_base) {
+@@ -694,9 +693,9 @@ static void __init ath79_clocks_init_dt_
+ }
+
+ if (of_device_is_compatible(np, "qca,ar9130-pll"))
+- ar724x_clk_init(ref_clk, pll_base);
++ ar724x_clocks_init(pll_base);
+ else if (of_device_is_compatible(np, "qca,ar9330-pll"))
+- ar9330_clk_init(ref_clk, pll_base);
++ ar933x_clocks_init(pll_base);
+ else {
+ pr_err("%pOF: could not find any appropriate clk_init()\n", np);
+ goto err_iounmap;
+@@ -714,9 +713,6 @@ err_iounmap:
+
+ err_clk:
+ clk_put(ref_clk);
+-
+-err:
+- return;
+ }
+ CLK_OF_DECLARE(ar9130_clk, "qca,ar9130-pll", ath79_clocks_init_dt_ng);
+ CLK_OF_DECLARE(ar9330_clk, "qca,ar9330-pll", ath79_clocks_init_dt_ng);
diff --git a/target/linux/ath79/patches-4.19/0025-MIPS-ath79-support-setting-up-clock-via-DT-on-all-So.patch b/target/linux/ath79/patches-4.19/0025-MIPS-ath79-support-setting-up-clock-via-DT-on-all-So.patch
new file mode 100644
index 00000000000..13f46a91464
--- /dev/null
+++ b/target/linux/ath79/patches-4.19/0025-MIPS-ath79-support-setting-up-clock-via-DT-on-all-So.patch
@@ -0,0 +1,77 @@
+From 6325626de001df98aebe51f3008b1aca05798d19 Mon Sep 17 00:00:00 2001
+From: Felix Fietkau <nbd@nbd.name>
+Date: Tue, 6 Mar 2018 13:26:27 +0100
+Subject: [PATCH 25/33] MIPS: ath79: support setting up clock via DT on all SoC
+ types
+
+Use the same functions as the legacy code
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ arch/mips/ath79/clock.c | 39 ++++++++++++++++++++++-----------------
+ 1 file changed, 22 insertions(+), 17 deletions(-)
+
+--- a/arch/mips/ath79/clock.c
++++ b/arch/mips/ath79/clock.c
+@@ -669,16 +669,6 @@ ath79_get_sys_clk_rate(const char *id)
+ #ifdef CONFIG_OF
+ static void __init ath79_clocks_init_dt(struct device_node *np)
+ {
+- of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+-}
+-
+-CLK_OF_DECLARE(ar7100, "qca,ar7100-pll", ath79_clocks_init_dt);
+-CLK_OF_DECLARE(ar7240, "qca,ar7240-pll", ath79_clocks_init_dt);
+-CLK_OF_DECLARE(ar9340, "qca,ar9340-pll", ath79_clocks_init_dt);
+-CLK_OF_DECLARE(ar9550, "qca,qca9550-pll", ath79_clocks_init_dt);
+-
+-static void __init ath79_clocks_init_dt_ng(struct device_node *np)
+-{
+ struct clk *ref_clk;
+ void __iomem *pll_base;
+
+@@ -692,14 +682,21 @@ static void __init ath79_clocks_init_dt_
+ goto err_clk;
+ }
+
+- if (of_device_is_compatible(np, "qca,ar9130-pll"))
++ if (of_device_is_compatible(np, "qca,ar7100-pll"))
++ ar71xx_clocks_init(pll_base);
++ else if (of_device_is_compatible(np, "qca,ar7240-pll") ||
++ of_device_is_compatible(np, "qca,ar9130-pll"))
+ ar724x_clocks_init(pll_base);
+ else if (of_device_is_compatible(np, "qca,ar9330-pll"))
+ ar933x_clocks_init(pll_base);
+- else {
+- pr_err("%pOF: could not find any appropriate clk_init()\n", np);
+- goto err_iounmap;
+- }
++ else if (of_device_is_compatible(np, "qca,ar9340-pll"))
++ ar934x_clocks_init(pll_base);
++ else if (of_device_is_compatible(np, "qca,qca9530-pll"))
++ qca953x_clocks_init(pll_base);
++ else if (of_device_is_compatible(np, "qca,qca9550-pll"))
++ qca955x_clocks_init(pll_base);
++ else if (of_device_is_compatible(np, "qca,qca9560-pll"))
++ qca956x_clocks_init(pll_base);
+
+ if (of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data)) {
+ pr_err("%pOF: could not register clk provider\n", np);
+@@ -714,6 +711,14 @@ err_iounmap:
+ err_clk:
+ clk_put(ref_clk);
+ }
+-CLK_OF_DECLARE(ar9130_clk, "qca,ar9130-pll", ath79_clocks_init_dt_ng);
+-CLK_OF_DECLARE(ar9330_clk, "qca,ar9330-pll", ath79_clocks_init_dt_ng);
++
++CLK_OF_DECLARE(ar7100_clk, "qca,ar7100-pll", ath79_clocks_init_dt);
++CLK_OF_DECLARE(ar7240_clk, "qca,ar7240-pll", ath79_clocks_init_dt);
++CLK_OF_DECLARE(ar9130_clk, "qca,ar9130-pll", ath79_clocks_init_dt);
++CLK_OF_DECLARE(ar9330_clk, "qca,ar9330-pll", ath79_clocks_init_dt);
++CLK_OF_DECLARE(ar9340_clk, "qca,ar9340-pll", ath79_clocks_init_dt);
++CLK_OF_DECLARE(ar9530_clk, "qca,qca9530-pll", ath79_clocks_init_dt);
++CLK_OF_DECLARE(ar9550_clk, "qca,qca9550-pll", ath79_clocks_init_dt);
++CLK_OF_DECLARE(ar9560_clk, "qca,qca9560-pll", ath79_clocks_init_dt);
++
+ #endif
diff --git a/target/linux/ath79/patches-4.19/0026-MIPS-ath79-export-switch-MDIO-reference-clock.patch b/target/linux/ath79/patches-4.19/0026-MIPS-ath79-export-switch-MDIO-reference-clock.patch
new file mode 100644
index 00000000000..27adb56f560
--- /dev/null
+++ b/target/linux/ath79/patches-4.19/0026-MIPS-ath79-export-switch-MDIO-reference-clock.patch
@@ -0,0 +1,59 @@
+From 78538d673801902108797f2c813e70cfbce280c9 Mon Sep 17 00:00:00 2001
+From: Felix Fietkau <nbd@nbd.name>
+Date: Tue, 6 Mar 2018 13:27:28 +0100
+Subject: [PATCH 26/33] MIPS: ath79: export switch MDIO reference clock
+
+On AR934x, the MDIO reference clock can be configured to a fixed 100 MHz
+clock. If that feature is not used, it defaults to the main reference
+clock, like on all other SoC.
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ arch/mips/ath79/clock.c | 8 ++++++++
+ include/dt-bindings/clock/ath79-clk.h | 3 ++-
+ 2 files changed, 10 insertions(+), 1 deletion(-)
+
+--- a/arch/mips/ath79/clock.c
++++ b/arch/mips/ath79/clock.c
+@@ -42,6 +42,7 @@ static const char * const clk_names[ATH7
+ [ATH79_CLK_DDR] = "ddr",
+ [ATH79_CLK_AHB] = "ahb",
+ [ATH79_CLK_REF] = "ref",
++ [ATH79_CLK_MDIO] = "mdio",
+ };
+
+ static const char * __init ath79_clk_name(int type)
+@@ -342,6 +343,10 @@ static void __init ar934x_clocks_init(vo
+ ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
+ ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
+
++ clk_ctrl = __raw_readl(pll_base + AR934X_PLL_SWITCH_CLOCK_CONTROL_REG);
++ if (clk_ctrl & AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL)
++ ath79_set_clk(ATH79_CLK_MDIO, 100 * 1000 * 1000);
++
+ iounmap(dpll_base);
+ }
+
+@@ -698,6 +703,9 @@ static void __init ath79_clocks_init_dt(
+ else if (of_device_is_compatible(np, "qca,qca9560-pll"))
+ qca956x_clocks_init(pll_base);
+
++ if (!clks[ATH79_CLK_MDIO])
++ clks[ATH79_CLK_MDIO] = clks[ATH79_CLK_REF];
++
+ if (of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data)) {
+ pr_err("%pOF: could not register clk provider\n", np);
+ goto err_iounmap;
+--- a/include/dt-bindings/clock/ath79-clk.h
++++ b/include/dt-bindings/clock/ath79-clk.h
+@@ -14,7 +14,8 @@
+ #define ATH79_CLK_DDR 1
+ #define ATH79_CLK_AHB 2
+ #define ATH79_CLK_REF 3
++#define ATH79_CLK_MDIO 4
+
+-#define ATH79_CLK_END 4
++#define ATH79_CLK_END 5
+
+ #endif /* __DT_BINDINGS_ATH79_CLK_H */
diff --git a/target/linux/ath79/patches-4.19/0027-MIPS-ath79-drop-legacy-IRQ-code.patch b/target/linux/ath79/patches-4.19/0027-MIPS-ath79-drop-legacy-IRQ-code.patch
new file mode 100644
index 00000000000..79f003d2ea3
--- /dev/null
+++ b/target/linux/ath79/patches-4.19/0027-MIPS-ath79-drop-legacy-IRQ-code.patch
@@ -0,0 +1,233 @@
+From 3765b1f79593a0a9098ed15e48074c95403a53ee Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Sat, 23 Jun 2018 15:05:08 +0200
+Subject: [PATCH 27/33] MIPS: ath79: drop legacy IRQ code
+
+With the target now being fully OF based, we can drop the legacy IRQ code.
+All IRQs are now handled via the new irqchip drivers.
+
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ arch/mips/ath79/Makefile | 2 +-
+ arch/mips/ath79/irq.c | 169 -------------------------------
+ arch/mips/ath79/setup.c | 6 ++
+ arch/mips/include/asm/mach-ath79/ath79.h | 4 -
+ 4 files changed, 7 insertions(+), 174 deletions(-)
+ delete mode 100644 arch/mips/ath79/irq.c
+
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -8,7 +8,7 @@
+ # under the terms of the GNU General Public License version 2 as published
+ # by the Free Software Foundation.
+
+-obj-y := prom.o setup.o irq.o common.o clock.o
++obj-y := prom.o setup.o common.o clock.o
+
+ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+ obj-$(CONFIG_PCI) += pci.o
+--- a/arch/mips/ath79/irq.c
++++ /dev/null
+@@ -1,169 +0,0 @@
+-/*
+- * Atheros AR71xx/AR724x/AR913x specific interrupt handling
+- *
+- * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
+- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+- *
+- * Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
+- *
+- * This program is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License version 2 as published
+- * by the Free Software Foundation.
+- */
+-
+-#include <linux/kernel.h>
+-#include <linux/init.h>
+-#include <linux/interrupt.h>
+-#include <linux/irqchip.h>
+-#include <linux/of_irq.h>
+-
+-#include <asm/irq_cpu.h>
+-#include <asm/mipsregs.h>
+-
+-#include <asm/mach-ath79/ath79.h>
+-#include <asm/mach-ath79/ar71xx_regs.h>
+-#include "common.h"
+-#include "machtypes.h"
+-
+-
+-static void ar934x_ip2_irq_dispatch(struct irq_desc *desc)
+-{
+- u32 status;
+-
+- status = ath79_reset_rr(AR934X_RESET_REG_PCIE_WMAC_INT_STATUS);
+-
+- if (status & AR934X_PCIE_WMAC_INT_PCIE_ALL) {
+- ath79_ddr_wb_flush(3);
+- generic_handle_irq(ATH79_IP2_IRQ(0));
+- } else if (status & AR934X_PCIE_WMAC_INT_WMAC_ALL) {
+- ath79_ddr_wb_flush(4);
+- generic_handle_irq(ATH79_IP2_IRQ(1));
+- } else {
+- spurious_interrupt();
+- }
+-}
+-
+-static void ar934x_ip2_irq_init(void)
+-{
+- int i;
+-
+- for (i = ATH79_IP2_IRQ_BASE;
+- i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
+- irq_set_chip_and_handler(i, &dummy_irq_chip,
+- handle_level_irq);
+-
+- irq_set_chained_handler(ATH79_CPU_IRQ(2), ar934x_ip2_irq_dispatch);
+-}
+-
+-static void qca955x_ip2_irq_dispatch(struct irq_desc *desc)
+-{
+- u32 status;
+-
+- status = ath79_reset_rr(QCA955X_RESET_REG_EXT_INT_STATUS);
+- status &= QCA955X_EXT_INT_PCIE_RC1_ALL | QCA955X_EXT_INT_WMAC_ALL;
+-
+- if (status == 0) {
+- spurious_interrupt();
+- return;
+- }
+-
+- if (status & QCA955X_EXT_INT_PCIE_RC1_ALL) {
+- /* TODO: flush DDR? */
+- generic_handle_irq(ATH79_IP2_IRQ(0));
+- }
+-
+- if (status & QCA955X_EXT_INT_WMAC_ALL) {
+- /* TODO: flush DDR? */
+- generic_handle_irq(ATH79_IP2_IRQ(1));
+- }
+-}
+-
+-static void qca955x_ip3_irq_dispatch(struct irq_desc *desc)
+-{
+- u32 status;
+-
+- status = ath79_reset_rr(QCA955X_RESET_REG_EXT_INT_STATUS);
+- status &= QCA955X_EXT_INT_PCIE_RC2_ALL |
+- QCA955X_EXT_INT_USB1 |
+- QCA955X_EXT_INT_USB2;
+-
+- if (status == 0) {
+- spurious_interrupt();
+- return;
+- }
+-
+- if (status & QCA955X_EXT_INT_USB1) {
+- /* TODO: flush DDR? */
+- generic_handle_irq(ATH79_IP3_IRQ(0));
+- }
+-
+- if (status & QCA955X_EXT_INT_USB2) {
+- /* TODO: flush DDR? */
+- generic_handle_irq(ATH79_IP3_IRQ(1));
+- }
+-
+- if (status & QCA955X_EXT_INT_PCIE_RC2_ALL) {
+- /* TODO: flush DDR? */
+- generic_handle_irq(ATH79_IP3_IRQ(2));
+- }
+-}
+-
+-static void qca955x_irq_init(void)
+-{
+- int i;
+-
+- for (i = ATH79_IP2_IRQ_BASE;
+- i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
+- irq_set_chip_and_handler(i, &dummy_irq_chip,
+- handle_level_irq);
+-
+- irq_set_chained_handler(ATH79_CPU_IRQ(2), qca955x_ip2_irq_dispatch);
+-
+- for (i = ATH79_IP3_IRQ_BASE;
+- i < ATH79_IP3_IRQ_BASE + ATH79_IP3_IRQ_COUNT; i++)
+- irq_set_chip_and_handler(i, &dummy_irq_chip,
+- handle_level_irq);
+-
+- irq_set_chained_handler(ATH79_CPU_IRQ(3), qca955x_ip3_irq_dispatch);
+-}
+-
+-void __init arch_init_irq(void)
+-{
+- unsigned irq_wb_chan2 = -1;
+- unsigned irq_wb_chan3 = -1;
+- bool misc_is_ar71xx;
+-
+- if (mips_machtype == ATH79_MACH_GENERIC_OF) {
+- irqchip_init();
+- return;
+- }
+-
+- if (soc_is_ar71xx() || soc_is_ar724x() ||
+- soc_is_ar913x() || soc_is_ar933x()) {
+- irq_wb_chan2 = 3;
+- irq_wb_chan3 = 2;
+- } else if (soc_is_ar934x()) {
+- irq_wb_chan3 = 2;
+- }
+-
+- ath79_cpu_irq_init(irq_wb_chan2, irq_wb_chan3);
+-
+- if (soc_is_ar71xx() || soc_is_ar913x())
+- misc_is_ar71xx = true;
+- else if (soc_is_ar724x() ||
+- soc_is_ar933x() ||
+- soc_is_ar934x() ||
+- soc_is_qca955x())
+- misc_is_ar71xx = false;
+- else
+- BUG();
+- ath79_misc_irq_init(
+- ath79_reset_base + AR71XX_RESET_REG_MISC_INT_STATUS,
+- ATH79_CPU_IRQ(6), ATH79_MISC_IRQ_BASE, misc_is_ar71xx);
+-
+- if (soc_is_ar934x())
+- ar934x_ip2_irq_init();
+- else if (soc_is_qca955x())
+- qca955x_irq_init();
+-}
+--- a/arch/mips/ath79/setup.c
++++ b/arch/mips/ath79/setup.c
+@@ -19,6 +19,7 @@
+ #include <linux/clk.h>
+ #include <linux/clk-provider.h>
+ #include <linux/of_fdt.h>
++#include <linux/irqchip.h>
+
+ #include <asm/bootinfo.h>
+ #include <asm/idle.h>
+@@ -311,6 +312,11 @@ void __init plat_time_init(void)
+ mips_hpt_frequency = cpu_clk_rate / 2;
+ }
+
++void __init arch_init_irq(void)
++{
++ irqchip_init();
++}
++
+ static int __init ath79_setup(void)
+ {
+ if (mips_machtype == ATH79_MACH_GENERIC_OF)
+--- a/arch/mips/include/asm/mach-ath79/ath79.h
++++ b/arch/mips/include/asm/mach-ath79/ath79.h
+@@ -178,8 +178,4 @@ static inline u32 ath79_reset_rr(unsigne
+ void ath79_device_reset_set(u32 mask);
+ void ath79_device_reset_clear(u32 mask);
+
+-void ath79_cpu_irq_init(unsigned irq_wb_chan2, unsigned irq_wb_chan3);
+-void ath79_misc_irq_init(void __iomem *regs, int irq,
+- int irq_base, bool is_ar71xx);
+-
+ #endif /* __ASM_MACH_ATH79_H */
diff --git a/target/linux/ath79/patches-4.19/0028-MIPS-ath79-drop-machfiles.patch b/target/linux/ath79/patches-4.19/0028-MIPS-ath79-drop-machfiles.patch
new file mode 100644
index 00000000000..0515b206b04
--- /dev/null
+++ b/target/linux/ath79/patches-4.19/0028-MIPS-ath79-drop-machfiles.patch
@@ -0,0 +1,1048 @@
+From badf28957b6dc400dff27bd23ba2ae75d9514be5 Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Sat, 23 Jun 2018 15:04:09 +0200
+Subject: [PATCH 28/33] MIPS: ath79: drop machfiles
+
+With the target now being fully OF based, we can drop the legacy mach
+files. Boards can now boot fully of devicetree files.
+
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ arch/mips/Kconfig | 1 -
+ arch/mips/ath79/Kconfig | 73 -------------------
+ arch/mips/ath79/Makefile | 10 ---
+ arch/mips/ath79/clock.c | 1 -
+ arch/mips/ath79/mach-ap121.c | 92 ------------------------
+ arch/mips/ath79/mach-ap136.c | 156 -----------------------------------------
+ arch/mips/ath79/mach-ap81.c | 100 --------------------------
+ arch/mips/ath79/mach-db120.c | 136 -----------------------------------
+ arch/mips/ath79/mach-pb44.c | 128 ---------------------------------
+ arch/mips/ath79/mach-ubnt-xm.c | 126 ---------------------------------
+ arch/mips/ath79/machtypes.h | 28 --------
+ arch/mips/ath79/setup.c | 77 +++-----------------
+ 12 files changed, 9 insertions(+), 919 deletions(-)
+ delete mode 100644 arch/mips/ath79/mach-ap121.c
+ delete mode 100644 arch/mips/ath79/mach-ap136.c
+ delete mode 100644 arch/mips/ath79/mach-ap81.c
+ delete mode 100644 arch/mips/ath79/mach-db120.c
+ delete mode 100644 arch/mips/ath79/mach-pb44.c
+ delete mode 100644 arch/mips/ath79/mach-ubnt-xm.c
+ delete mode 100644 arch/mips/ath79/machtypes.h
+
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -202,7 +202,6 @@ config ATH79
+ select COMMON_CLK
+ select CLKDEV_LOOKUP
+ select IRQ_MIPS_CPU
+- select MIPS_MACHINE
+ select SYS_HAS_CPU_MIPS32_R2
+ select SYS_HAS_EARLY_PRINTK
+ select SYS_SUPPORTS_32BIT_KERNEL
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -1,79 +1,6 @@
+ # SPDX-License-Identifier: GPL-2.0
+ if ATH79
+
+-menu "Atheros AR71XX/AR724X/AR913X machine selection"
+-
+-config ATH79_MACH_AP121
+- bool "Atheros AP121 reference board"
+- select SOC_AR933X
+- select ATH79_DEV_GPIO_BUTTONS
+- select ATH79_DEV_LEDS_GPIO
+- select ATH79_DEV_SPI
+- select ATH79_DEV_USB
+- select ATH79_DEV_WMAC
+- help
+- Say 'Y' here if you want your kernel to support the
+- Atheros AP121 reference board.
+-
+-config ATH79_MACH_AP136
+- bool "Atheros AP136 reference board"
+- select SOC_QCA955X
+- select ATH79_DEV_GPIO_BUTTONS
+- select ATH79_DEV_LEDS_GPIO
+- select ATH79_DEV_SPI
+- select ATH79_DEV_USB
+- select ATH79_DEV_WMAC
+- help
+- Say 'Y' here if you want your kernel to support the
+- Atheros AP136 reference board.
+-
+-config ATH79_MACH_AP81
+- bool "Atheros AP81 reference board"
+- select SOC_AR913X
+- select ATH79_DEV_GPIO_BUTTONS
+- select ATH79_DEV_LEDS_GPIO
+- select ATH79_DEV_SPI
+- select ATH79_DEV_USB
+- select ATH79_DEV_WMAC
+- help
+- Say 'Y' here if you want your kernel to support the
+- Atheros AP81 reference board.
+-
+-config ATH79_MACH_DB120
+- bool "Atheros DB120 reference board"
+- select SOC_AR934X
+- select ATH79_DEV_GPIO_BUTTONS
+- select ATH79_DEV_LEDS_GPIO
+- select ATH79_DEV_SPI
+- select ATH79_DEV_USB
+- select ATH79_DEV_WMAC
+- help
+- Say 'Y' here if you want your kernel to support the
+- Atheros DB120 reference board.
+-
+-config ATH79_MACH_PB44
+- bool "Atheros PB44 reference board"
+- select SOC_AR71XX
+- select ATH79_DEV_GPIO_BUTTONS
+- select ATH79_DEV_LEDS_GPIO
+- select ATH79_DEV_SPI
+- select ATH79_DEV_USB
+- help
+- Say 'Y' here if you want your kernel to support the
+- Atheros PB44 reference board.
+-
+-config ATH79_MACH_UBNT_XM
+- bool "Ubiquiti Networks XM (rev 1.0) board"
+- select SOC_AR724X
+- select ATH79_DEV_GPIO_BUTTONS
+- select ATH79_DEV_LEDS_GPIO
+- select ATH79_DEV_SPI
+- help
+- Say 'Y' here if you want your kernel to support the
+- Ubiquiti Networks XM (rev 1.0) board.
+-
+-endmenu
+-
+ config SOC_AR71XX
+ select HW_HAS_PCI
+ def_bool n
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -22,13 +22,3 @@ obj-$(CONFIG_ATH79_DEV_LEDS_GPIO) += dev
+ obj-$(CONFIG_ATH79_DEV_SPI) += dev-spi.o
+ obj-$(CONFIG_ATH79_DEV_USB) += dev-usb.o
+ obj-$(CONFIG_ATH79_DEV_WMAC) += dev-wmac.o
+-
+-#
+-# Machines
+-#
+-obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o
+-obj-$(CONFIG_ATH79_MACH_AP136) += mach-ap136.o
+-obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o
+-obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
+-obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o
+-obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach-ubnt-xm.o
+--- a/arch/mips/ath79/clock.c
++++ b/arch/mips/ath79/clock.c
+@@ -26,7 +26,6 @@
+ #include <asm/mach-ath79/ath79.h>
+ #include <asm/mach-ath79/ar71xx_regs.h>
+ #include "common.h"
+-#include "machtypes.h"
+
+ #define AR71XX_BASE_FREQ 40000000
+ #define AR724X_BASE_FREQ 40000000
+--- a/arch/mips/ath79/mach-ap121.c
++++ /dev/null
+@@ -1,92 +0,0 @@
+-/*
+- * Atheros AP121 board support
+- *
+- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
+- *
+- * This program is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License version 2 as published
+- * by the Free Software Foundation.
+- */
+-
+-#include "machtypes.h"
+-#include "dev-gpio-buttons.h"
+-#include "dev-leds-gpio.h"
+-#include "dev-spi.h"
+-#include "dev-usb.h"
+-#include "dev-wmac.h"
+-
+-#define AP121_GPIO_LED_WLAN 0
+-#define AP121_GPIO_LED_USB 1
+-
+-#define AP121_GPIO_BTN_JUMPSTART 11
+-#define AP121_GPIO_BTN_RESET 12
+-
+-#define AP121_KEYS_POLL_INTERVAL 20 /* msecs */
+-#define AP121_KEYS_DEBOUNCE_INTERVAL (3 * AP121_KEYS_POLL_INTERVAL)
+-
+-#define AP121_CAL_DATA_ADDR 0x1fff1000
+-
+-static struct gpio_led ap121_leds_gpio[] __initdata = {
+- {
+- .name = "ap121:green:usb",
+- .gpio = AP121_GPIO_LED_USB,
+- .active_low = 0,
+- },
+- {
+- .name = "ap121:green:wlan",
+- .gpio = AP121_GPIO_LED_WLAN,
+- .active_low = 0,
+- },
+-};
+-
+-static struct gpio_keys_button ap121_gpio_keys[] __initdata = {
+- {
+- .desc = "jumpstart button",
+- .type = EV_KEY,
+- .code = KEY_WPS_BUTTON,
+- .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
+- .gpio = AP121_GPIO_BTN_JUMPSTART,
+- .active_low = 1,
+- },
+- {
+- .desc = "reset button",
+- .type = EV_KEY,
+- .code = KEY_RESTART,
+- .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
+- .gpio = AP121_GPIO_BTN_RESET,
+- .active_low = 1,
+- }
+-};
+-
+-static struct spi_board_info ap121_spi_info[] = {
+- {
+- .bus_num = 0,
+- .chip_select = 0,
+- .max_speed_hz = 25000000,
+- .modalias = "mx25l1606e",
+- }
+-};
+-
+-static struct ath79_spi_platform_data ap121_spi_data = {
+- .bus_num = 0,
+- .num_chipselect = 1,
+-};
+-
+-static void __init ap121_setup(void)
+-{
+- u8 *cal_data = (u8 *) KSEG1ADDR(AP121_CAL_DATA_ADDR);
+-
+- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_leds_gpio),
+- ap121_leds_gpio);
+- ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL,
+- ARRAY_SIZE(ap121_gpio_keys),
+- ap121_gpio_keys);
+-
+- ath79_register_spi(&ap121_spi_data, ap121_spi_info,
+- ARRAY_SIZE(ap121_spi_info));
+- ath79_register_usb();
+- ath79_register_wmac(cal_data);
+-}
+-
+-MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board",
+- ap121_setup);
+--- a/arch/mips/ath79/mach-ap136.c
++++ /dev/null
+@@ -1,156 +0,0 @@
+-/*
+- * Qualcomm Atheros AP136 reference board support
+- *
+- * Copyright (c) 2012 Qualcomm Atheros
+- * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org>
+- *
+- * Permission to use, copy, modify, and/or distribute this software for any
+- * purpose with or without fee is hereby granted, provided that the above
+- * copyright notice and this permission notice appear in all copies.
+- *
+- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+- *
+- */
+-
+-#include <linux/pci.h>
+-#include <linux/ath9k_platform.h>
+-
+-#include "machtypes.h"
+-#include "dev-gpio-buttons.h"
+-#include "dev-leds-gpio.h"
+-#include "dev-spi.h"
+-#include "dev-usb.h"
+-#include "dev-wmac.h"
+-#include "pci.h"
+-
+-#define AP136_GPIO_LED_STATUS_RED 14
+-#define AP136_GPIO_LED_STATUS_GREEN 19
+-#define AP136_GPIO_LED_USB 4
+-#define AP136_GPIO_LED_WLAN_2G 13
+-#define AP136_GPIO_LED_WLAN_5G 12
+-#define AP136_GPIO_LED_WPS_RED 15
+-#define AP136_GPIO_LED_WPS_GREEN 20
+-
+-#define AP136_GPIO_BTN_WPS 16
+-#define AP136_GPIO_BTN_RFKILL 21
+-
+-#define AP136_KEYS_POLL_INTERVAL 20 /* msecs */
+-#define AP136_KEYS_DEBOUNCE_INTERVAL (3 * AP136_KEYS_POLL_INTERVAL)
+-
+-#define AP136_WMAC_CALDATA_OFFSET 0x1000
+-#define AP136_PCIE_CALDATA_OFFSET 0x5000
+-
+-static struct gpio_led ap136_leds_gpio[] __initdata = {
+- {
+- .name = "qca:green:status",
+- .gpio = AP136_GPIO_LED_STATUS_GREEN,
+- .active_low = 1,
+- },
+- {
+- .name = "qca:red:status",
+- .gpio = AP136_GPIO_LED_STATUS_RED,
+- .active_low = 1,
+- },
+- {
+- .name = "qca:green:wps",
+- .gpio = AP136_GPIO_LED_WPS_GREEN,
+- .active_low = 1,
+- },
+- {
+- .name = "qca:red:wps",
+- .gpio = AP136_GPIO_LED_WPS_RED,
+- .active_low = 1,
+- },
+- {
+- .name = "qca:red:wlan-2g",
+- .gpio = AP136_GPIO_LED_WLAN_2G,
+- .active_low = 1,
+- },
+- {
+- .name = "qca:red:usb",
+- .gpio = AP136_GPIO_LED_USB,
+- .active_low = 1,
+- }
+-};
+-
+-static struct gpio_keys_button ap136_gpio_keys[] __initdata = {
+- {
+- .desc = "WPS button",
+- .type = EV_KEY,
+- .code = KEY_WPS_BUTTON,
+- .debounce_interval = AP136_KEYS_DEBOUNCE_INTERVAL,
+- .gpio = AP136_GPIO_BTN_WPS,
+- .active_low = 1,
+- },
+- {
+- .desc = "RFKILL button",
+- .type = EV_KEY,
+- .code = KEY_RFKILL,
+- .debounce_interval = AP136_KEYS_DEBOUNCE_INTERVAL,
+- .gpio = AP136_GPIO_BTN_RFKILL,
+- .active_low = 1,
+- },
+-};
+-
+-static struct spi_board_info ap136_spi_info[] = {
+- {
+- .bus_num = 0,
+- .chip_select = 0,
+- .max_speed_hz = 25000000,
+- .modalias = "mx25l6405d",
+- }
+-};
+-
+-static struct ath79_spi_platform_data ap136_spi_data = {
+- .bus_num = 0,
+- .num_chipselect = 1,
+-};
+-
+-#ifdef CONFIG_PCI
+-static struct ath9k_platform_data ap136_ath9k_data;
+-
+-static int ap136_pci_plat_dev_init(struct pci_dev *dev)
+-{
+- if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0)
+- dev->dev.platform_data = &ap136_ath9k_data;
+-
+- return 0;
+-}
+-
+-static void __init ap136_pci_init(u8 *eeprom)
+-{
+- memcpy(ap136_ath9k_data.eeprom_data, eeprom,
+- sizeof(ap136_ath9k_data.eeprom_data));
+-
+- ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init);
+- ath79_register_pci();
+-}
+-#else
+-static inline void ap136_pci_init(u8 *eeprom) {}
+-#endif /* CONFIG_PCI */
+-
+-static void __init ap136_setup(void)
+-{
+- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+-
+- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio),
+- ap136_leds_gpio);
+- ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL,
+- ARRAY_SIZE(ap136_gpio_keys),
+- ap136_gpio_keys);
+- ath79_register_spi(&ap136_spi_data, ap136_spi_info,
+- ARRAY_SIZE(ap136_spi_info));
+- ath79_register_usb();
+- ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET);
+- ap136_pci_init(art + AP136_PCIE_CALDATA_OFFSET);
+-}
+-
+-MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010",
+- "Atheros AP136-010 reference board",
+- ap136_setup);
+--- a/arch/mips/ath79/mach-ap81.c
++++ /dev/null
+@@ -1,100 +0,0 @@
+-/*
+- * Atheros AP81 board support
+- *
+- * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+- * Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
+- *
+- * This program is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License version 2 as published
+- * by the Free Software Foundation.
+- */
+-
+-#include "machtypes.h"
+-#include "dev-wmac.h"
+-#include "dev-gpio-buttons.h"
+-#include "dev-leds-gpio.h"
+-#include "dev-spi.h"
+-#include "dev-usb.h"
+-
+-#define AP81_GPIO_LED_STATUS 1
+-#define AP81_GPIO_LED_AOSS 3
+-#define AP81_GPIO_LED_WLAN 6
+-#define AP81_GPIO_LED_POWER 14
+-
+-#define AP81_GPIO_BTN_SW4 12
+-#define AP81_GPIO_BTN_SW1 21
+-
+-#define AP81_KEYS_POLL_INTERVAL 20 /* msecs */
+-#define AP81_KEYS_DEBOUNCE_INTERVAL (3 * AP81_KEYS_POLL_INTERVAL)
+-
+-#define AP81_CAL_DATA_ADDR 0x1fff1000
+-
+-static struct gpio_led ap81_leds_gpio[] __initdata = {
+- {
+- .name = "ap81:green:status",
+- .gpio = AP81_GPIO_LED_STATUS,
+- .active_low = 1,
+- }, {
+- .name = "ap81:amber:aoss",
+- .gpio = AP81_GPIO_LED_AOSS,
+- .active_low = 1,
+- }, {
+- .name = "ap81:green:wlan",
+- .gpio = AP81_GPIO_LED_WLAN,
+- .active_low = 1,
+- }, {
+- .name = "ap81:green:power",
+- .gpio = AP81_GPIO_LED_POWER,
+- .active_low = 1,
+- }
+-};
+-
+-static struct gpio_keys_button ap81_gpio_keys[] __initdata = {
+- {
+- .desc = "sw1",
+- .type = EV_KEY,
+- .code = BTN_0,
+- .debounce_interval = AP81_KEYS_DEBOUNCE_INTERVAL,
+- .gpio = AP81_GPIO_BTN_SW1,
+- .active_low = 1,
+- } , {
+- .desc = "sw4",
+- .type = EV_KEY,
+- .code = BTN_1,
+- .debounce_interval = AP81_KEYS_DEBOUNCE_INTERVAL,
+- .gpio = AP81_GPIO_BTN_SW4,
+- .active_low = 1,
+- }
+-};
+-
+-static struct spi_board_info ap81_spi_info[] = {
+- {
+- .bus_num = 0,
+- .chip_select = 0,
+- .max_speed_hz = 25000000,
+- .modalias = "m25p64",
+- }
+-};
+-
+-static struct ath79_spi_platform_data ap81_spi_data = {
+- .bus_num = 0,
+- .num_chipselect = 1,
+-};
+-
+-static void __init ap81_setup(void)
+-{
+- u8 *cal_data = (u8 *) KSEG1ADDR(AP81_CAL_DATA_ADDR);
+-
+- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap81_leds_gpio),
+- ap81_leds_gpio);
+- ath79_register_gpio_keys_polled(-1, AP81_KEYS_POLL_INTERVAL,
+- ARRAY_SIZE(ap81_gpio_keys),
+- ap81_gpio_keys);
+- ath79_register_spi(&ap81_spi_data, ap81_spi_info,
+- ARRAY_SIZE(ap81_spi_info));
+- ath79_register_wmac(cal_data);
+- ath79_register_usb();
+-}
+-
+-MIPS_MACHINE(ATH79_MACH_AP81, "AP81", "Atheros AP81 reference board",
+- ap81_setup);
+--- a/arch/mips/ath79/mach-db120.c
++++ /dev/null
+@@ -1,136 +0,0 @@
+-/*
+- * Atheros DB120 reference board support
+- *
+- * Copyright (c) 2011 Qualcomm Atheros
+- * Copyright (c) 2011 Gabor Juhos <juhosg@openwrt.org>
+- *
+- * Permission to use, copy, modify, and/or distribute this software for any
+- * purpose with or without fee is hereby granted, provided that the above
+- * copyright notice and this permission notice appear in all copies.
+- *
+- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+- *
+- */
+-
+-#include <linux/pci.h>
+-#include <linux/ath9k_platform.h>
+-
+-#include "machtypes.h"
+-#include "dev-gpio-buttons.h"
+-#include "dev-leds-gpio.h"
+-#include "dev-spi.h"
+-#include "dev-usb.h"
+-#include "dev-wmac.h"
+-#include "pci.h"
+-
+-#define DB120_GPIO_LED_WLAN_5G 12
+-#define DB120_GPIO_LED_WLAN_2G 13
+-#define DB120_GPIO_LED_STATUS 14
+-#define DB120_GPIO_LED_WPS 15
+-
+-#define DB120_GPIO_BTN_WPS 16
+-
+-#define DB120_KEYS_POLL_INTERVAL 20 /* msecs */
+-#define DB120_KEYS_DEBOUNCE_INTERVAL (3 * DB120_KEYS_POLL_INTERVAL)
+-
+-#define DB120_WMAC_CALDATA_OFFSET 0x1000
+-#define DB120_PCIE_CALDATA_OFFSET 0x5000
+-
+-static struct gpio_led db120_leds_gpio[] __initdata = {
+- {
+- .name = "db120:green:status",
+- .gpio = DB120_GPIO_LED_STATUS,
+- .active_low = 1,
+- },
+- {
+- .name = "db120:green:wps",
+- .gpio = DB120_GPIO_LED_WPS,
+- .active_low = 1,
+- },
+- {
+- .name = "db120:green:wlan-5g",
+- .gpio = DB120_GPIO_LED_WLAN_5G,
+- .active_low = 1,
+- },
+- {
+- .name = "db120:green:wlan-2g",
+- .gpio = DB120_GPIO_LED_WLAN_2G,
+- .active_low = 1,
+- },
+-};
+-
+-static struct gpio_keys_button db120_gpio_keys[] __initdata = {
+- {
+- .desc = "WPS button",
+- .type = EV_KEY,
+- .code = KEY_WPS_BUTTON,
+- .debounce_interval = DB120_KEYS_DEBOUNCE_INTERVAL,
+- .gpio = DB120_GPIO_BTN_WPS,
+- .active_low = 1,
+- },
+-};
+-
+-static struct spi_board_info db120_spi_info[] = {
+- {
+- .bus_num = 0,
+- .chip_select = 0,
+- .max_speed_hz = 25000000,
+- .modalias = "s25sl064a",
+- }
+-};
+-
+-static struct ath79_spi_platform_data db120_spi_data = {
+- .bus_num = 0,
+- .num_chipselect = 1,
+-};
+-
+-#ifdef CONFIG_PCI
+-static struct ath9k_platform_data db120_ath9k_data;
+-
+-static int db120_pci_plat_dev_init(struct pci_dev *dev)
+-{
+- switch (PCI_SLOT(dev->devfn)) {
+- case 0:
+- dev->dev.platform_data = &db120_ath9k_data;
+- break;
+- }
+-
+- return 0;
+-}
+-
+-static void __init db120_pci_init(u8 *eeprom)
+-{
+- memcpy(db120_ath9k_data.eeprom_data, eeprom,
+- sizeof(db120_ath9k_data.eeprom_data));
+-
+- ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init);
+- ath79_register_pci();
+-}
+-#else
+-static inline void db120_pci_init(u8 *eeprom) {}
+-#endif /* CONFIG_PCI */
+-
+-static void __init db120_setup(void)
+-{
+- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+-
+- ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio),
+- db120_leds_gpio);
+- ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL,
+- ARRAY_SIZE(db120_gpio_keys),
+- db120_gpio_keys);
+- ath79_register_spi(&db120_spi_data, db120_spi_info,
+- ARRAY_SIZE(db120_spi_info));
+- ath79_register_usb();
+- ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET);
+- db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
+-}
+-
+-MIPS_MACHINE(ATH79_MACH_DB120, "DB120", "Atheros DB120 reference board",
+- db120_setup);
+--- a/arch/mips/ath79/mach-pb44.c
++++ /dev/null
+@@ -1,128 +0,0 @@
+-/*
+- * Atheros PB44 reference board support
+- *
+- * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+- *
+- * This program is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License version 2 as published
+- * by the Free Software Foundation.
+- */
+-
+-#include <linux/init.h>
+-#include <linux/platform_device.h>
+-#include <linux/i2c.h>
+-#include <linux/gpio/machine.h>
+-#include <linux/platform_data/pcf857x.h>
+-
+-#include "machtypes.h"
+-#include "dev-gpio-buttons.h"
+-#include "dev-leds-gpio.h"
+-#include "dev-spi.h"
+-#include "dev-usb.h"
+-#include "pci.h"
+-
+-#define PB44_GPIO_I2C_SCL 0
+-#define PB44_GPIO_I2C_SDA 1
+-
+-#define PB44_GPIO_EXP_BASE 16
+-#define PB44_GPIO_SW_RESET (PB44_GPIO_EXP_BASE + 6)
+-#define PB44_GPIO_SW_JUMP (PB44_GPIO_EXP_BASE + 8)
+-#define PB44_GPIO_LED_JUMP1 (PB44_GPIO_EXP_BASE + 9)
+-#define PB44_GPIO_LED_JUMP2 (PB44_GPIO_EXP_BASE + 10)
+-
+-#define PB44_KEYS_POLL_INTERVAL 20 /* msecs */
+-#define PB44_KEYS_DEBOUNCE_INTERVAL (3 * PB44_KEYS_POLL_INTERVAL)
+-
+-static struct gpiod_lookup_table pb44_i2c_gpiod_table = {
+- .dev_id = "i2c-gpio.0",
+- .table = {
+- GPIO_LOOKUP_IDX("ath79-gpio", PB44_GPIO_I2C_SDA,
+- NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
+- GPIO_LOOKUP_IDX("ath79-gpio", PB44_GPIO_I2C_SCL,
+- NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
+- },
+-};
+-
+-static struct platform_device pb44_i2c_gpio_device = {
+- .name = "i2c-gpio",
+- .id = 0,
+- .dev = {
+- .platform_data = NULL,
+- }
+-};
+-
+-static struct pcf857x_platform_data pb44_pcf857x_data = {
+- .gpio_base = PB44_GPIO_EXP_BASE,
+-};
+-
+-static struct i2c_board_info pb44_i2c_board_info[] __initdata = {
+- {
+- I2C_BOARD_INFO("pcf8575", 0x20),
+- .platform_data = &pb44_pcf857x_data,
+- },
+-};
+-
+-static struct gpio_led pb44_leds_gpio[] __initdata = {
+- {
+- .name = "pb44:amber:jump1",
+- .gpio = PB44_GPIO_LED_JUMP1,
+- .active_low = 1,
+- }, {
+- .name = "pb44:green:jump2",
+- .gpio = PB44_GPIO_LED_JUMP2,
+- .active_low = 1,
+- },
+-};
+-
+-static struct gpio_keys_button pb44_gpio_keys[] __initdata = {
+- {
+- .desc = "soft_reset",
+- .type = EV_KEY,
+- .code = KEY_RESTART,
+- .debounce_interval = PB44_KEYS_DEBOUNCE_INTERVAL,
+- .gpio = PB44_GPIO_SW_RESET,
+- .active_low = 1,
+- } , {
+- .desc = "jumpstart",
+- .type = EV_KEY,
+- .code = KEY_WPS_BUTTON,
+- .debounce_interval = PB44_KEYS_DEBOUNCE_INTERVAL,
+- .gpio = PB44_GPIO_SW_JUMP,
+- .active_low = 1,
+- }
+-};
+-
+-static struct spi_board_info pb44_spi_info[] = {
+- {
+- .bus_num = 0,
+- .chip_select = 0,
+- .max_speed_hz = 25000000,
+- .modalias = "m25p64",
+- },
+-};
+-
+-static struct ath79_spi_platform_data pb44_spi_data = {
+- .bus_num = 0,
+- .num_chipselect = 1,
+-};
+-
+-static void __init pb44_init(void)
+-{
+- gpiod_add_lookup_table(&pb44_i2c_gpiod_table);
+- i2c_register_board_info(0, pb44_i2c_board_info,
+- ARRAY_SIZE(pb44_i2c_board_info));
+- platform_device_register(&pb44_i2c_gpio_device);
+-
+- ath79_register_leds_gpio(-1, ARRAY_SIZE(pb44_leds_gpio),
+- pb44_leds_gpio);
+- ath79_register_gpio_keys_polled(-1, PB44_KEYS_POLL_INTERVAL,
+- ARRAY_SIZE(pb44_gpio_keys),
+- pb44_gpio_keys);
+- ath79_register_spi(&pb44_spi_data, pb44_spi_info,
+- ARRAY_SIZE(pb44_spi_info));
+- ath79_register_usb();
+- ath79_register_pci();
+-}
+-
+-MIPS_MACHINE(ATH79_MACH_PB44, "PB44", "Atheros PB44 reference board",
+- pb44_init);
+--- a/arch/mips/ath79/mach-ubnt-xm.c
++++ /dev/null
+@@ -1,126 +0,0 @@
+-/*
+- * Ubiquiti Networks XM (rev 1.0) board support
+- *
+- * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
+- *
+- * Derived from: mach-pb44.c
+- *
+- * This program is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License version 2 as published
+- * by the Free Software Foundation.
+- */
+-
+-#include <linux/init.h>
+-#include <linux/pci.h>
+-#include <linux/ath9k_platform.h>
+-
+-#include <asm/mach-ath79/irq.h>
+-
+-#include "machtypes.h"
+-#include "dev-gpio-buttons.h"
+-#include "dev-leds-gpio.h"
+-#include "dev-spi.h"
+-#include "pci.h"
+-
+-#define UBNT_XM_GPIO_LED_L1 0
+-#define UBNT_XM_GPIO_LED_L2 1
+-#define UBNT_XM_GPIO_LED_L3 11
+-#define UBNT_XM_GPIO_LED_L4 7
+-
+-#define UBNT_XM_GPIO_BTN_RESET 12
+-
+-#define UBNT_XM_KEYS_POLL_INTERVAL 20
+-#define UBNT_XM_KEYS_DEBOUNCE_INTERVAL (3 * UBNT_XM_KEYS_POLL_INTERVAL)
+-
+-#define UBNT_XM_EEPROM_ADDR (u8 *) KSEG1ADDR(0x1fff1000)
+-
+-static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
+- {
+- .name = "ubnt-xm:red:link1",
+- .gpio = UBNT_XM_GPIO_LED_L1,
+- .active_low = 0,
+- }, {
+- .name = "ubnt-xm:orange:link2",
+- .gpio = UBNT_XM_GPIO_LED_L2,
+- .active_low = 0,
+- }, {
+- .name = "ubnt-xm:green:link3",
+- .gpio = UBNT_XM_GPIO_LED_L3,
+- .active_low = 0,
+- }, {
+- .name = "ubnt-xm:green:link4",
+- .gpio = UBNT_XM_GPIO_LED_L4,
+- .active_low = 0,
+- },
+-};
+-
+-static struct gpio_keys_button ubnt_xm_gpio_keys[] __initdata = {
+- {
+- .desc = "reset",
+- .type = EV_KEY,
+- .code = KEY_RESTART,
+- .debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL,
+- .gpio = UBNT_XM_GPIO_BTN_RESET,
+- .active_low = 1,
+- }
+-};
+-
+-static struct spi_board_info ubnt_xm_spi_info[] = {
+- {
+- .bus_num = 0,
+- .chip_select = 0,
+- .max_speed_hz = 25000000,
+- .modalias = "mx25l6405d",
+- }
+-};
+-
+-static struct ath79_spi_platform_data ubnt_xm_spi_data = {
+- .bus_num = 0,
+- .num_chipselect = 1,
+-};
+-
+-#ifdef CONFIG_PCI
+-static struct ath9k_platform_data ubnt_xm_eeprom_data;
+-
+-static int ubnt_xm_pci_plat_dev_init(struct pci_dev *dev)
+-{
+- switch (PCI_SLOT(dev->devfn)) {
+- case 0:
+- dev->dev.platform_data = &ubnt_xm_eeprom_data;
+- break;
+- }
+-
+- return 0;
+-}
+-
+-static void __init ubnt_xm_pci_init(void)
+-{
+- memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
+- sizeof(ubnt_xm_eeprom_data.eeprom_data));
+-
+- ath79_pci_set_plat_dev_init(ubnt_xm_pci_plat_dev_init);
+- ath79_register_pci();
+-}
+-#else
+-static inline void ubnt_xm_pci_init(void) {}
+-#endif /* CONFIG_PCI */
+-
+-static void __init ubnt_xm_init(void)
+-{
+- ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio),
+- ubnt_xm_leds_gpio);
+-
+- ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
+- ARRAY_SIZE(ubnt_xm_gpio_keys),
+- ubnt_xm_gpio_keys);
+-
+- ath79_register_spi(&ubnt_xm_spi_data, ubnt_xm_spi_info,
+- ARRAY_SIZE(ubnt_xm_spi_info));
+-
+- ubnt_xm_pci_init();
+-}
+-
+-MIPS_MACHINE(ATH79_MACH_UBNT_XM,
+- "UBNT-XM",
+- "Ubiquiti Networks XM (rev 1.0) board",
+- ubnt_xm_init);
+--- a/arch/mips/ath79/machtypes.h
++++ /dev/null
+@@ -1,28 +0,0 @@
+-/*
+- * Atheros AR71XX/AR724X/AR913X machine type definitions
+- *
+- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
+- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+- *
+- * This program is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License version 2 as published
+- * by the Free Software Foundation.
+- */
+-
+-#ifndef _ATH79_MACHTYPE_H
+-#define _ATH79_MACHTYPE_H
+-
+-#include <asm/mips_machine.h>
+-
+-enum ath79_mach_type {
+- ATH79_MACH_GENERIC_OF = -1, /* Device tree board */
+- ATH79_MACH_GENERIC = 0,
+- ATH79_MACH_AP121, /* Atheros AP121 reference board */
+- ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */
+- ATH79_MACH_AP81, /* Atheros AP81 reference board */
+- ATH79_MACH_DB120, /* Atheros DB120 reference board */
+- ATH79_MACH_PB44, /* Atheros PB44 reference board */
+- ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */
+-};
+-
+-#endif /* _ATH79_MACHTYPE_H */
+--- a/arch/mips/ath79/setup.c
++++ b/arch/mips/ath79/setup.c
+@@ -33,7 +33,6 @@
+ #include <asm/mach-ath79/ar71xx_regs.h>
+ #include "common.h"
+ #include "dev-common.h"
+-#include "machtypes.h"
+
+ #define ATH79_SYS_TYPE_LEN 64
+
+@@ -236,25 +235,21 @@ void __init plat_mem_setup(void)
+ else if (fw_passed_dtb)
+ __dt_setup_arch((void *)KSEG0ADDR(fw_passed_dtb));
+
+- if (mips_machtype != ATH79_MACH_GENERIC_OF) {
+- ath79_reset_base = ioremap_nocache(AR71XX_RESET_BASE,
+- AR71XX_RESET_SIZE);
+- ath79_pll_base = ioremap_nocache(AR71XX_PLL_BASE,
+- AR71XX_PLL_SIZE);
+- ath79_detect_sys_type();
+- ath79_ddr_ctrl_init();
++ ath79_reset_base = ioremap_nocache(AR71XX_RESET_BASE,
++ AR71XX_RESET_SIZE);
++ ath79_pll_base = ioremap_nocache(AR71XX_PLL_BASE,
++ AR71XX_PLL_SIZE);
++ ath79_detect_sys_type();
++ ath79_ddr_ctrl_init();
+
+- detect_memory_region(0, ATH79_MEM_SIZE_MIN, ATH79_MEM_SIZE_MAX);
+-
+- /* OF machines should use the reset driver */
+- _machine_restart = ath79_restart;
+- }
++ detect_memory_region(0, ATH79_MEM_SIZE_MIN, ATH79_MEM_SIZE_MAX);
+
++ _machine_restart = ath79_restart;
+ _machine_halt = ath79_halt;
+ pm_power_off = ath79_halt;
+ }
+
+-static void __init ath79_of_plat_time_init(void)
++void __init plat_time_init(void)
+ {
+ struct device_node *np;
+ struct clk *clk;
+@@ -284,66 +279,12 @@ static void __init ath79_of_plat_time_in
+ clk_put(clk);
+ }
+
+-void __init plat_time_init(void)
+-{
+- unsigned long cpu_clk_rate;
+- unsigned long ahb_clk_rate;
+- unsigned long ddr_clk_rate;
+- unsigned long ref_clk_rate;
+-
+- if (IS_ENABLED(CONFIG_OF) && mips_machtype == ATH79_MACH_GENERIC_OF) {
+- ath79_of_plat_time_init();
+- return;
+- }
+-
+- ath79_clocks_init();
+-
+- cpu_clk_rate = ath79_get_sys_clk_rate("cpu");
+- ahb_clk_rate = ath79_get_sys_clk_rate("ahb");
+- ddr_clk_rate = ath79_get_sys_clk_rate("ddr");
+- ref_clk_rate = ath79_get_sys_clk_rate("ref");
+-
+- pr_info("Clocks: CPU:%lu.%03luMHz, DDR:%lu.%03luMHz, AHB:%lu.%03luMHz, Ref:%lu.%03luMHz\n",
+- cpu_clk_rate / 1000000, (cpu_clk_rate / 1000) % 1000,
+- ddr_clk_rate / 1000000, (ddr_clk_rate / 1000) % 1000,
+- ahb_clk_rate / 1000000, (ahb_clk_rate / 1000) % 1000,
+- ref_clk_rate / 1000000, (ref_clk_rate / 1000) % 1000);
+-
+- mips_hpt_frequency = cpu_clk_rate / 2;
+-}
+-
+ void __init arch_init_irq(void)
+ {
+ irqchip_init();
+ }
+
+-static int __init ath79_setup(void)
+-{
+- if (mips_machtype == ATH79_MACH_GENERIC_OF)
+- return 0;
+-
+- ath79_gpio_init();
+- ath79_register_uart();
+- ath79_register_wdt();
+-
+- mips_machine_setup();
+-
+- return 0;
+-}
+-
+-arch_initcall(ath79_setup);
+-
+ void __init device_tree_init(void)
+ {
+ unflatten_and_copy_device_tree();
+ }
+-
+-MIPS_MACHINE(ATH79_MACH_GENERIC,
+- "Generic",
+- "Generic AR71XX/AR724X/AR913X based board",
+- NULL);
+-
+-MIPS_MACHINE(ATH79_MACH_GENERIC_OF,
+- "DTB",
+- "Generic AR71XX/AR724X/AR913X based board (DT)",
+- NULL);
diff --git a/target/linux/ath79/patches-4.19/0029-MIPS-ath79-drop-legacy-pci-code.patch b/target/linux/ath79/patches-4.19/0029-MIPS-ath79-drop-legacy-pci-code.patch
new file mode 100644
index 00000000000..254f2f92534
--- /dev/null
+++ b/target/linux/ath79/patches-4.19/0029-MIPS-ath79-drop-legacy-pci-code.patch
@@ -0,0 +1,379 @@
+From d0f1420702ed47a82572aaf39e7407055518d14e Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Sat, 23 Jun 2018 15:05:19 +0200
+Subject: [PATCH 29/33] MIPS: ath79: drop legacy pci code
+
+With the target now being fully OF based, we can drop the legacy pci
+platform code. The only bits that we need to keep is the fixup code
+which we move to its own code file.
+
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ arch/mips/ath79/Makefile | 1 -
+ arch/mips/ath79/pci.c | 273 --------------------------------------------
+ arch/mips/ath79/pci.h | 35 ------
+ arch/mips/pci/Makefile | 1 +
+ arch/mips/pci/fixup-ath79.c | 21 ++++
+ 5 files changed, 22 insertions(+), 309 deletions(-)
+ delete mode 100644 arch/mips/ath79/pci.c
+ delete mode 100644 arch/mips/ath79/pci.h
+ create mode 100644 arch/mips/pci/fixup-ath79.c
+
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -11,7 +11,6 @@
+ obj-y := prom.o setup.o common.o clock.o
+
+ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+-obj-$(CONFIG_PCI) += pci.o
+
+ #
+ # Devices
+--- a/arch/mips/ath79/pci.c
++++ /dev/null
+@@ -1,273 +0,0 @@
+-/*
+- * Atheros AR71XX/AR724X specific PCI setup code
+- *
+- * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
+- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+- *
+- * Parts of this file are based on Atheros' 2.6.15 BSP
+- *
+- * This program is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License version 2 as published
+- * by the Free Software Foundation.
+- */
+-
+-#include <linux/init.h>
+-#include <linux/pci.h>
+-#include <linux/resource.h>
+-#include <linux/platform_device.h>
+-#include <asm/mach-ath79/ar71xx_regs.h>
+-#include <asm/mach-ath79/ath79.h>
+-#include <asm/mach-ath79/irq.h>
+-#include "pci.h"
+-
+-static int (*ath79_pci_plat_dev_init)(struct pci_dev *dev);
+-static const struct ath79_pci_irq *ath79_pci_irq_map;
+-static unsigned ath79_pci_nr_irqs;
+-
+-static const struct ath79_pci_irq ar71xx_pci_irq_map[] = {
+- {
+- .slot = 17,
+- .pin = 1,
+- .irq = ATH79_PCI_IRQ(0),
+- }, {
+- .slot = 18,
+- .pin = 1,
+- .irq = ATH79_PCI_IRQ(1),
+- }, {
+- .slot = 19,
+- .pin = 1,
+- .irq = ATH79_PCI_IRQ(2),
+- }
+-};
+-
+-static const struct ath79_pci_irq ar724x_pci_irq_map[] = {
+- {
+- .slot = 0,
+- .pin = 1,
+- .irq = ATH79_PCI_IRQ(0),
+- }
+-};
+-
+-static const struct ath79_pci_irq qca955x_pci_irq_map[] = {
+- {
+- .bus = 0,
+- .slot = 0,
+- .pin = 1,
+- .irq = ATH79_PCI_IRQ(0),
+- },
+- {
+- .bus = 1,
+- .slot = 0,
+- .pin = 1,
+- .irq = ATH79_PCI_IRQ(1),
+- },
+-};
+-
+-int pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin)
+-{
+- int irq = -1;
+- int i;
+-
+- if (ath79_pci_nr_irqs == 0 ||
+- ath79_pci_irq_map == NULL) {
+- if (soc_is_ar71xx()) {
+- ath79_pci_irq_map = ar71xx_pci_irq_map;
+- ath79_pci_nr_irqs = ARRAY_SIZE(ar71xx_pci_irq_map);
+- } else if (soc_is_ar724x() ||
+- soc_is_ar9342() ||
+- soc_is_ar9344()) {
+- ath79_pci_irq_map = ar724x_pci_irq_map;
+- ath79_pci_nr_irqs = ARRAY_SIZE(ar724x_pci_irq_map);
+- } else if (soc_is_qca955x()) {
+- ath79_pci_irq_map = qca955x_pci_irq_map;
+- ath79_pci_nr_irqs = ARRAY_SIZE(qca955x_pci_irq_map);
+- } else {
+- pr_crit("pci %s: invalid irq map\n",
+- pci_name((struct pci_dev *) dev));
+- return irq;
+- }
+- }
+-
+- for (i = 0; i < ath79_pci_nr_irqs; i++) {
+- const struct ath79_pci_irq *entry;
+-
+- entry = &ath79_pci_irq_map[i];
+- if (entry->bus == dev->bus->number &&
+- entry->slot == slot &&
+- entry->pin == pin) {
+- irq = entry->irq;
+- break;
+- }
+- }
+-
+- if (irq < 0)
+- pr_crit("pci %s: no irq found for pin %u\n",
+- pci_name((struct pci_dev *) dev), pin);
+- else
+- pr_info("pci %s: using irq %d for pin %u\n",
+- pci_name((struct pci_dev *) dev), irq, pin);
+-
+- return irq;
+-}
+-
+-int pcibios_plat_dev_init(struct pci_dev *dev)
+-{
+- if (ath79_pci_plat_dev_init)
+- return ath79_pci_plat_dev_init(dev);
+-
+- return 0;
+-}
+-
+-void __init ath79_pci_set_irq_map(unsigned nr_irqs,
+- const struct ath79_pci_irq *map)
+-{
+- ath79_pci_nr_irqs = nr_irqs;
+- ath79_pci_irq_map = map;
+-}
+-
+-void __init ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev))
+-{
+- ath79_pci_plat_dev_init = func;
+-}
+-
+-static struct platform_device *
+-ath79_register_pci_ar71xx(void)
+-{
+- struct platform_device *pdev;
+- struct resource res[4];
+-
+- memset(res, 0, sizeof(res));
+-
+- res[0].name = "cfg_base";
+- res[0].flags = IORESOURCE_MEM;
+- res[0].start = AR71XX_PCI_CFG_BASE;
+- res[0].end = AR71XX_PCI_CFG_BASE + AR71XX_PCI_CFG_SIZE - 1;
+-
+- res[1].flags = IORESOURCE_IRQ;
+- res[1].start = ATH79_CPU_IRQ(2);
+- res[1].end = ATH79_CPU_IRQ(2);
+-
+- res[2].name = "io_base";
+- res[2].flags = IORESOURCE_IO;
+- res[2].start = 0;
+- res[2].end = 0;
+-
+- res[3].name = "mem_base";
+- res[3].flags = IORESOURCE_MEM;
+- res[3].start = AR71XX_PCI_MEM_BASE;
+- res[3].end = AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE - 1;
+-
+- pdev = platform_device_register_simple("ar71xx-pci", -1,
+- res, ARRAY_SIZE(res));
+- return pdev;
+-}
+-
+-static struct platform_device *
+-ath79_register_pci_ar724x(int id,
+- unsigned long cfg_base,
+- unsigned long ctrl_base,
+- unsigned long crp_base,
+- unsigned long mem_base,
+- unsigned long mem_size,
+- unsigned long io_base,
+- int irq)
+-{
+- struct platform_device *pdev;
+- struct resource res[6];
+-
+- memset(res, 0, sizeof(res));
+-
+- res[0].name = "cfg_base";
+- res[0].flags = IORESOURCE_MEM;
+- res[0].start = cfg_base;
+- res[0].end = cfg_base + AR724X_PCI_CFG_SIZE - 1;
+-
+- res[1].name = "ctrl_base";
+- res[1].flags = IORESOURCE_MEM;
+- res[1].start = ctrl_base;
+- res[1].end = ctrl_base + AR724X_PCI_CTRL_SIZE - 1;
+-
+- res[2].flags = IORESOURCE_IRQ;
+- res[2].start = irq;
+- res[2].end = irq;
+-
+- res[3].name = "mem_base";
+- res[3].flags = IORESOURCE_MEM;
+- res[3].start = mem_base;
+- res[3].end = mem_base + mem_size - 1;
+-
+- res[4].name = "io_base";
+- res[4].flags = IORESOURCE_IO;
+- res[4].start = io_base;
+- res[4].end = io_base;
+-
+- res[5].name = "crp_base";
+- res[5].flags = IORESOURCE_MEM;
+- res[5].start = crp_base;
+- res[5].end = crp_base + AR724X_PCI_CRP_SIZE - 1;
+-
+- pdev = platform_device_register_simple("ar724x-pci", id,
+- res, ARRAY_SIZE(res));
+- return pdev;
+-}
+-
+-int __init ath79_register_pci(void)
+-{
+- struct platform_device *pdev = NULL;
+-
+- if (soc_is_ar71xx()) {
+- pdev = ath79_register_pci_ar71xx();
+- } else if (soc_is_ar724x()) {
+- pdev = ath79_register_pci_ar724x(-1,
+- AR724X_PCI_CFG_BASE,
+- AR724X_PCI_CTRL_BASE,
+- AR724X_PCI_CRP_BASE,
+- AR724X_PCI_MEM_BASE,
+- AR724X_PCI_MEM_SIZE,
+- 0,
+- ATH79_CPU_IRQ(2));
+- } else if (soc_is_ar9342() ||
+- soc_is_ar9344()) {
+- u32 bootstrap;
+-
+- bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
+- if ((bootstrap & AR934X_BOOTSTRAP_PCIE_RC) == 0)
+- return -ENODEV;
+-
+- pdev = ath79_register_pci_ar724x(-1,
+- AR724X_PCI_CFG_BASE,
+- AR724X_PCI_CTRL_BASE,
+- AR724X_PCI_CRP_BASE,
+- AR724X_PCI_MEM_BASE,
+- AR724X_PCI_MEM_SIZE,
+- 0,
+- ATH79_IP2_IRQ(0));
+- } else if (soc_is_qca9558()) {
+- pdev = ath79_register_pci_ar724x(0,
+- QCA955X_PCI_CFG_BASE0,
+- QCA955X_PCI_CTRL_BASE0,
+- QCA955X_PCI_CRP_BASE0,
+- QCA955X_PCI_MEM_BASE0,
+- QCA955X_PCI_MEM_SIZE,
+- 0,
+- ATH79_IP2_IRQ(0));
+-
+- pdev = ath79_register_pci_ar724x(1,
+- QCA955X_PCI_CFG_BASE1,
+- QCA955X_PCI_CTRL_BASE1,
+- QCA955X_PCI_CRP_BASE1,
+- QCA955X_PCI_MEM_BASE1,
+- QCA955X_PCI_MEM_SIZE,
+- 1,
+- ATH79_IP3_IRQ(2));
+- } else {
+- /* No PCI support */
+- return -ENODEV;
+- }
+-
+- if (!pdev)
+- pr_err("unable to register PCI controller device\n");
+-
+- return pdev ? 0 : -ENODEV;
+-}
+--- a/arch/mips/ath79/pci.h
++++ /dev/null
+@@ -1,35 +0,0 @@
+-/*
+- * Atheros AR71XX/AR724X PCI support
+- *
+- * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
+- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+- *
+- * This program is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License version 2 as published
+- * by the Free Software Foundation.
+- */
+-
+-#ifndef _ATH79_PCI_H
+-#define _ATH79_PCI_H
+-
+-struct ath79_pci_irq {
+- int bus;
+- u8 slot;
+- u8 pin;
+- int irq;
+-};
+-
+-#ifdef CONFIG_PCI
+-void ath79_pci_set_irq_map(unsigned nr_irqs, const struct ath79_pci_irq *map);
+-void ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev));
+-int ath79_register_pci(void);
+-#else
+-static inline void
+-ath79_pci_set_irq_map(unsigned nr_irqs, const struct ath79_pci_irq *map) {}
+-static inline void
+-ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *)) {}
+-static inline int ath79_register_pci(void) { return 0; }
+-#endif
+-
+-#endif /* _ATH79_PCI_H */
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -29,6 +29,7 @@ obj-$(CONFIG_MIPS_PCI_VIRTIO) += pci-vir
+ #
+ # These are still pretty much in the old state, watch, go blind.
+ #
++obj-$(CONFIG_ATH79) += fixup-ath79.o
+ obj-$(CONFIG_LASAT) += pci-lasat.o
+ obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o
+ obj-$(CONFIG_LEMOTE_FULOONG2E) += fixup-fuloong2e.o ops-loongson2.o
+--- /dev/null
++++ b/arch/mips/pci/fixup-ath79.c
+@@ -0,0 +1,21 @@
++/*
++ * Copyright (C) 2018 John Crispin <john@phrozen.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/pci.h>
++//#include <linux/of_irq.h>
++#include <linux/of_pci.h>
++
++int pcibios_plat_dev_init(struct pci_dev *dev)
++{
++ return PCIBIOS_SUCCESSFUL;
++}
++
++int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
++{
++ return of_irq_parse_and_map_pci(dev, slot, pin);
++}
diff --git a/target/linux/ath79/patches-4.19/0030-MIPS-ath79-drop-platform-device-registration-code.patch b/target/linux/ath79/patches-4.19/0030-MIPS-ath79-drop-platform-device-registration-code.patch
new file mode 100644
index 00000000000..93a133c1dfb
--- /dev/null
+++ b/target/linux/ath79/patches-4.19/0030-MIPS-ath79-drop-platform-device-registration-code.patch
@@ -0,0 +1,933 @@
+From dce930fba8ad3a90ccd164f199e57c2d61937ccd Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Sat, 23 Jun 2018 15:12:38 +0200
+Subject: [PATCH 30/33] MIPS: ath79: drop platform device registration code
+
+With the target now being fully OF based, we can drop the legacy platform
+device registration code. All devices and their drivers are now probed
+via OF.
+
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ arch/mips/ath79/Makefile | 10 --
+ arch/mips/ath79/common.h | 2 -
+ arch/mips/ath79/dev-common.c | 159 ------------------------
+ arch/mips/ath79/dev-common.h | 18 ---
+ arch/mips/ath79/dev-gpio-buttons.c | 56 ---------
+ arch/mips/ath79/dev-gpio-buttons.h | 23 ----
+ arch/mips/ath79/dev-leds-gpio.c | 54 ---------
+ arch/mips/ath79/dev-leds-gpio.h | 21 ----
+ arch/mips/ath79/dev-spi.c | 38 ------
+ arch/mips/ath79/dev-spi.h | 22 ----
+ arch/mips/ath79/dev-usb.c | 242 -------------------------------------
+ arch/mips/ath79/dev-usb.h | 17 ---
+ arch/mips/ath79/dev-wmac.c | 155 ------------------------
+ arch/mips/ath79/dev-wmac.h | 17 ---
+ arch/mips/ath79/setup.c | 1 -
+ 15 files changed, 835 deletions(-)
+ delete mode 100644 arch/mips/ath79/dev-common.c
+ delete mode 100644 arch/mips/ath79/dev-common.h
+ delete mode 100644 arch/mips/ath79/dev-gpio-buttons.c
+ delete mode 100644 arch/mips/ath79/dev-gpio-buttons.h
+ delete mode 100644 arch/mips/ath79/dev-leds-gpio.c
+ delete mode 100644 arch/mips/ath79/dev-leds-gpio.h
+ delete mode 100644 arch/mips/ath79/dev-spi.c
+ delete mode 100644 arch/mips/ath79/dev-spi.h
+ delete mode 100644 arch/mips/ath79/dev-usb.c
+ delete mode 100644 arch/mips/ath79/dev-usb.h
+ delete mode 100644 arch/mips/ath79/dev-wmac.c
+ delete mode 100644 arch/mips/ath79/dev-wmac.h
+
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -11,13 +11,3 @@
+ obj-y := prom.o setup.o common.o clock.o
+
+ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+-
+-#
+-# Devices
+-#
+-obj-y += dev-common.o
+-obj-$(CONFIG_ATH79_DEV_GPIO_BUTTONS) += dev-gpio-buttons.o
+-obj-$(CONFIG_ATH79_DEV_LEDS_GPIO) += dev-leds-gpio.o
+-obj-$(CONFIG_ATH79_DEV_SPI) += dev-spi.o
+-obj-$(CONFIG_ATH79_DEV_USB) += dev-usb.o
+-obj-$(CONFIG_ATH79_DEV_WMAC) += dev-wmac.o
+--- a/arch/mips/ath79/common.h
++++ b/arch/mips/ath79/common.h
+@@ -24,6 +24,4 @@ unsigned long ath79_get_sys_clk_rate(con
+
+ void ath79_ddr_ctrl_init(void);
+
+-void ath79_gpio_init(void);
+-
+ #endif /* __ATH79_COMMON_H */
+--- a/arch/mips/ath79/dev-common.c
++++ /dev/null
+@@ -1,159 +0,0 @@
+-/*
+- * Atheros AR71XX/AR724X/AR913X common devices
+- *
+- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+- *
+- * Parts of this file are based on Atheros' 2.6.15 BSP
+- *
+- * This program is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License version 2 as published
+- * by the Free Software Foundation.
+- */
+-
+-#include <linux/kernel.h>
+-#include <linux/init.h>
+-#include <linux/platform_device.h>
+-#include <linux/platform_data/gpio-ath79.h>
+-#include <linux/serial_8250.h>
+-#include <linux/clk.h>
+-#include <linux/err.h>
+-
+-#include <asm/mach-ath79/ath79.h>
+-#include <asm/mach-ath79/ar71xx_regs.h>
+-#include "common.h"
+-#include "dev-common.h"
+-
+-static struct resource ath79_uart_resources[] = {
+- {
+- .start = AR71XX_UART_BASE,
+- .end = AR71XX_UART_BASE + AR71XX_UART_SIZE - 1,
+- .flags = IORESOURCE_MEM,
+- },
+-};
+-
+-#define AR71XX_UART_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP)
+-static struct plat_serial8250_port ath79_uart_data[] = {
+- {
+- .mapbase = AR71XX_UART_BASE,
+- .irq = ATH79_MISC_IRQ(3),
+- .flags = AR71XX_UART_FLAGS,
+- .iotype = UPIO_MEM32,
+- .regshift = 2,
+- }, {
+- /* terminating entry */
+- }
+-};
+-
+-static struct platform_device ath79_uart_device = {
+- .name = "serial8250",
+- .id = PLAT8250_DEV_PLATFORM,
+- .resource = ath79_uart_resources,
+- .num_resources = ARRAY_SIZE(ath79_uart_resources),
+- .dev = {
+- .platform_data = ath79_uart_data
+- },
+-};
+-
+-static struct resource ar933x_uart_resources[] = {
+- {
+- .start = AR933X_UART_BASE,
+- .end = AR933X_UART_BASE + AR71XX_UART_SIZE - 1,
+- .flags = IORESOURCE_MEM,
+- },
+- {
+- .start = ATH79_MISC_IRQ(3),
+- .end = ATH79_MISC_IRQ(3),
+- .flags = IORESOURCE_IRQ,
+- },
+-};
+-
+-static struct platform_device ar933x_uart_device = {
+- .name = "ar933x-uart",
+- .id = -1,
+- .resource = ar933x_uart_resources,
+- .num_resources = ARRAY_SIZE(ar933x_uart_resources),
+-};
+-
+-void __init ath79_register_uart(void)
+-{
+- unsigned long uart_clk_rate;
+-
+- uart_clk_rate = ath79_get_sys_clk_rate("uart");
+-
+- if (soc_is_ar71xx() ||
+- soc_is_ar724x() ||
+- soc_is_ar913x() ||
+- soc_is_ar934x() ||
+- soc_is_qca955x()) {
+- ath79_uart_data[0].uartclk = uart_clk_rate;
+- platform_device_register(&ath79_uart_device);
+- } else if (soc_is_ar933x()) {
+- platform_device_register(&ar933x_uart_device);
+- } else {
+- BUG();
+- }
+-}
+-
+-void __init ath79_register_wdt(void)
+-{
+- struct resource res;
+-
+- memset(&res, 0, sizeof(res));
+-
+- res.flags = IORESOURCE_MEM;
+- res.start = AR71XX_RESET_BASE + AR71XX_RESET_REG_WDOG_CTRL;
+- res.end = res.start + 0x8 - 1;
+-
+- platform_device_register_simple("ath79-wdt", -1, &res, 1);
+-}
+-
+-static struct ath79_gpio_platform_data ath79_gpio_pdata;
+-
+-static struct resource ath79_gpio_resources[] = {
+- {
+- .flags = IORESOURCE_MEM,
+- .start = AR71XX_GPIO_BASE,
+- .end = AR71XX_GPIO_BASE + AR71XX_GPIO_SIZE - 1,
+- },
+- {
+- .start = ATH79_MISC_IRQ(2),
+- .end = ATH79_MISC_IRQ(2),
+- .flags = IORESOURCE_IRQ,
+- },
+-};
+-
+-static struct platform_device ath79_gpio_device = {
+- .name = "ath79-gpio",
+- .id = -1,
+- .resource = ath79_gpio_resources,
+- .num_resources = ARRAY_SIZE(ath79_gpio_resources),
+- .dev = {
+- .platform_data = &ath79_gpio_pdata
+- },
+-};
+-
+-void __init ath79_gpio_init(void)
+-{
+- if (soc_is_ar71xx()) {
+- ath79_gpio_pdata.ngpios = AR71XX_GPIO_COUNT;
+- } else if (soc_is_ar7240()) {
+- ath79_gpio_pdata.ngpios = AR7240_GPIO_COUNT;
+- } else if (soc_is_ar7241() || soc_is_ar7242()) {
+- ath79_gpio_pdata.ngpios = AR7241_GPIO_COUNT;
+- } else if (soc_is_ar913x()) {
+- ath79_gpio_pdata.ngpios = AR913X_GPIO_COUNT;
+- } else if (soc_is_ar933x()) {
+- ath79_gpio_pdata.ngpios = AR933X_GPIO_COUNT;
+- } else if (soc_is_ar934x()) {
+- ath79_gpio_pdata.ngpios = AR934X_GPIO_COUNT;
+- ath79_gpio_pdata.oe_inverted = 1;
+- } else if (soc_is_qca955x()) {
+- ath79_gpio_pdata.ngpios = QCA955X_GPIO_COUNT;
+- ath79_gpio_pdata.oe_inverted = 1;
+- } else {
+- BUG();
+- }
+-
+- platform_device_register(&ath79_gpio_device);
+-}
+--- a/arch/mips/ath79/dev-common.h
++++ /dev/null
+@@ -1,18 +0,0 @@
+-/*
+- * Atheros AR71XX/AR724X/AR913X common devices
+- *
+- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
+- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+- *
+- * This program is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License version 2 as published
+- * by the Free Software Foundation.
+- */
+-
+-#ifndef _ATH79_DEV_COMMON_H
+-#define _ATH79_DEV_COMMON_H
+-
+-void ath79_register_uart(void);
+-void ath79_register_wdt(void);
+-
+-#endif /* _ATH79_DEV_COMMON_H */
+--- a/arch/mips/ath79/dev-gpio-buttons.c
++++ /dev/null
+@@ -1,56 +0,0 @@
+-/*
+- * Atheros AR71XX/AR724X/AR913X GPIO button support
+- *
+- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
+- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+- *
+- * This program is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License version 2 as published
+- * by the Free Software Foundation.
+- */
+-
+-#include "linux/init.h"
+-#include "linux/slab.h"
+-#include <linux/platform_device.h>
+-
+-#include "dev-gpio-buttons.h"
+-
+-void __init ath79_register_gpio_keys_polled(int id,
+- unsigned poll_interval,
+- unsigned nbuttons,
+- struct gpio_keys_button *buttons)
+-{
+- struct platform_device *pdev;
+- struct gpio_keys_platform_data pdata;
+- struct gpio_keys_button *p;
+- int err;
+-
+- p = kmemdup(buttons, nbuttons * sizeof(*p), GFP_KERNEL);
+- if (!p)
+- return;
+-
+- pdev = platform_device_alloc("gpio-keys-polled", id);
+- if (!pdev)
+- goto err_free_buttons;
+-
+- memset(&pdata, 0, sizeof(pdata));
+- pdata.poll_interval = poll_interval;
+- pdata.nbuttons = nbuttons;
+- pdata.buttons = p;
+-
+- err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
+- if (err)
+- goto err_put_pdev;
+-
+- err = platform_device_add(pdev);
+- if (err)
+- goto err_put_pdev;
+-
+- return;
+-
+-err_put_pdev:
+- platform_device_put(pdev);
+-
+-err_free_buttons:
+- kfree(p);
+-}
+--- a/arch/mips/ath79/dev-gpio-buttons.h
++++ /dev/null
+@@ -1,23 +0,0 @@
+-/*
+- * Atheros AR71XX/AR724X/AR913X GPIO button support
+- *
+- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
+- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+- *
+- * This program is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License version 2 as published
+- * by the Free Software Foundation.
+- */
+-
+-#ifndef _ATH79_DEV_GPIO_BUTTONS_H
+-#define _ATH79_DEV_GPIO_BUTTONS_H
+-
+-#include <linux/input.h>
+-#include <linux/gpio_keys.h>
+-
+-void ath79_register_gpio_keys_polled(int id,
+- unsigned poll_interval,
+- unsigned nbuttons,
+- struct gpio_keys_button *buttons);
+-
+-#endif /* _ATH79_DEV_GPIO_BUTTONS_H */
+--- a/arch/mips/ath79/dev-leds-gpio.c
++++ /dev/null
+@@ -1,54 +0,0 @@
+-/*
+- * Atheros AR71XX/AR724X/AR913X common GPIO LEDs support
+- *
+- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
+- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+- *
+- * This program is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License version 2 as published
+- * by the Free Software Foundation.
+- */
+-
+-#include <linux/init.h>
+-#include <linux/slab.h>
+-#include <linux/platform_device.h>
+-
+-#include "dev-leds-gpio.h"
+-
+-void __init ath79_register_leds_gpio(int id,
+- unsigned num_leds,
+- struct gpio_led *leds)
+-{
+- struct platform_device *pdev;
+- struct gpio_led_platform_data pdata;
+- struct gpio_led *p;
+- int err;
+-
+- p = kmemdup(leds, num_leds * sizeof(*p), GFP_KERNEL);
+- if (!p)
+- return;
+-
+- pdev = platform_device_alloc("leds-gpio", id);
+- if (!pdev)
+- goto err_free_leds;
+-
+- memset(&pdata, 0, sizeof(pdata));
+- pdata.num_leds = num_leds;
+- pdata.leds = p;
+-
+- err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
+- if (err)
+- goto err_put_pdev;
+-
+- err = platform_device_add(pdev);
+- if (err)
+- goto err_put_pdev;
+-
+- return;
+-
+-err_put_pdev:
+- platform_device_put(pdev);
+-
+-err_free_leds:
+- kfree(p);
+-}
+--- a/arch/mips/ath79/dev-leds-gpio.h
++++ /dev/null
+@@ -1,21 +0,0 @@
+-/*
+- * Atheros AR71XX/AR724X/AR913X common GPIO LEDs support
+- *
+- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
+- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+- *
+- * This program is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License version 2 as published
+- * by the Free Software Foundation.
+- */
+-
+-#ifndef _ATH79_DEV_LEDS_GPIO_H
+-#define _ATH79_DEV_LEDS_GPIO_H
+-
+-#include <linux/leds.h>
+-
+-void ath79_register_leds_gpio(int id,
+- unsigned num_leds,
+- struct gpio_led *leds);
+-
+-#endif /* _ATH79_DEV_LEDS_GPIO_H */
+--- a/arch/mips/ath79/dev-spi.c
++++ /dev/null
+@@ -1,38 +0,0 @@
+-/*
+- * Atheros AR71XX/AR724X/AR913X SPI controller device
+- *
+- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
+- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+- *
+- * This program is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License version 2 as published
+- * by the Free Software Foundation.
+- */
+-
+-#include <linux/platform_device.h>
+-#include <asm/mach-ath79/ar71xx_regs.h>
+-#include "dev-spi.h"
+-
+-static struct resource ath79_spi_resources[] = {
+- {
+- .start = AR71XX_SPI_BASE,
+- .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1,
+- .flags = IORESOURCE_MEM,
+- },
+-};
+-
+-static struct platform_device ath79_spi_device = {
+- .name = "ath79-spi",
+- .id = -1,
+- .resource = ath79_spi_resources,
+- .num_resources = ARRAY_SIZE(ath79_spi_resources),
+-};
+-
+-void __init ath79_register_spi(struct ath79_spi_platform_data *pdata,
+- struct spi_board_info const *info,
+- unsigned n)
+-{
+- spi_register_board_info(info, n);
+- ath79_spi_device.dev.platform_data = pdata;
+- platform_device_register(&ath79_spi_device);
+-}
+--- a/arch/mips/ath79/dev-spi.h
++++ /dev/null
+@@ -1,22 +0,0 @@
+-/*
+- * Atheros AR71XX/AR724X/AR913X SPI controller device
+- *
+- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
+- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+- *
+- * This program is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License version 2 as published
+- * by the Free Software Foundation.
+- */
+-
+-#ifndef _ATH79_DEV_SPI_H
+-#define _ATH79_DEV_SPI_H
+-
+-#include <linux/spi/spi.h>
+-#include <asm/mach-ath79/ath79_spi_platform.h>
+-
+-void ath79_register_spi(struct ath79_spi_platform_data *pdata,
+- struct spi_board_info const *info,
+- unsigned n);
+-
+-#endif /* _ATH79_DEV_SPI_H */
+--- a/arch/mips/ath79/dev-usb.c
++++ /dev/null
+@@ -1,242 +0,0 @@
+-/*
+- * Atheros AR7XXX/AR9XXX USB Host Controller device
+- *
+- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+- *
+- * Parts of this file are based on Atheros' 2.6.15 BSP
+- *
+- * This program is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License version 2 as published
+- * by the Free Software Foundation.
+- */
+-
+-#include <linux/kernel.h>
+-#include <linux/init.h>
+-#include <linux/delay.h>
+-#include <linux/irq.h>
+-#include <linux/dma-mapping.h>
+-#include <linux/platform_device.h>
+-#include <linux/usb/ehci_pdriver.h>
+-#include <linux/usb/ohci_pdriver.h>
+-
+-#include <asm/mach-ath79/ath79.h>
+-#include <asm/mach-ath79/ar71xx_regs.h>
+-#include "common.h"
+-#include "dev-usb.h"
+-
+-static u64 ath79_usb_dmamask = DMA_BIT_MASK(32);
+-
+-static struct usb_ohci_pdata ath79_ohci_pdata = {
+-};
+-
+-static struct usb_ehci_pdata ath79_ehci_pdata_v1 = {
+- .has_synopsys_hc_bug = 1,
+-};
+-
+-static struct usb_ehci_pdata ath79_ehci_pdata_v2 = {
+- .caps_offset = 0x100,
+- .has_tt = 1,
+-};
+-
+-static void __init ath79_usb_register(const char *name, int id,
+- unsigned long base, unsigned long size,
+- int irq, const void *data,
+- size_t data_size)
+-{
+- struct resource res[2];
+- struct platform_device *pdev;
+-
+- memset(res, 0, sizeof(res));
+-
+- res[0].flags = IORESOURCE_MEM;
+- res[0].start = base;
+- res[0].end = base + size - 1;
+-
+- res[1].flags = IORESOURCE_IRQ;
+- res[1].start = irq;
+- res[1].end = irq;
+-
+- pdev = platform_device_register_resndata(NULL, name, id,
+- res, ARRAY_SIZE(res),
+- data, data_size);
+-
+- if (IS_ERR(pdev)) {
+- pr_err("ath79: unable to register USB at %08lx, err=%d\n",
+- base, (int) PTR_ERR(pdev));
+- return;
+- }
+-
+- pdev->dev.dma_mask = &ath79_usb_dmamask;
+- pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+-}
+-
+-#define AR71XX_USB_RESET_MASK (AR71XX_RESET_USB_HOST | \
+- AR71XX_RESET_USB_PHY | \
+- AR71XX_RESET_USB_OHCI_DLL)
+-
+-static void __init ath79_usb_setup(void)
+-{
+- void __iomem *usb_ctrl_base;
+-
+- ath79_device_reset_set(AR71XX_USB_RESET_MASK);
+- mdelay(1000);
+- ath79_device_reset_clear(AR71XX_USB_RESET_MASK);
+-
+- usb_ctrl_base = ioremap(AR71XX_USB_CTRL_BASE, AR71XX_USB_CTRL_SIZE);
+-
+- /* Turning on the Buff and Desc swap bits */
+- __raw_writel(0xf0000, usb_ctrl_base + AR71XX_USB_CTRL_REG_CONFIG);
+-
+- /* WAR for HW bug. Here it adjusts the duration between two SOFS */
+- __raw_writel(0x20c00, usb_ctrl_base + AR71XX_USB_CTRL_REG_FLADJ);
+-
+- iounmap(usb_ctrl_base);
+-
+- mdelay(900);
+-
+- ath79_usb_register("ohci-platform", -1,
+- AR71XX_OHCI_BASE, AR71XX_OHCI_SIZE,
+- ATH79_MISC_IRQ(6),
+- &ath79_ohci_pdata, sizeof(ath79_ohci_pdata));
+-
+- ath79_usb_register("ehci-platform", -1,
+- AR71XX_EHCI_BASE, AR71XX_EHCI_SIZE,
+- ATH79_CPU_IRQ(3),
+- &ath79_ehci_pdata_v1, sizeof(ath79_ehci_pdata_v1));
+-}
+-
+-static void __init ar7240_usb_setup(void)
+-{
+- void __iomem *usb_ctrl_base;
+-
+- ath79_device_reset_clear(AR7240_RESET_OHCI_DLL);
+- ath79_device_reset_set(AR7240_RESET_USB_HOST);
+-
+- mdelay(1000);
+-
+- ath79_device_reset_set(AR7240_RESET_OHCI_DLL);
+- ath79_device_reset_clear(AR7240_RESET_USB_HOST);
+-
+- usb_ctrl_base = ioremap(AR7240_USB_CTRL_BASE, AR7240_USB_CTRL_SIZE);
+-
+- /* WAR for HW bug. Here it adjusts the duration between two SOFS */
+- __raw_writel(0x3, usb_ctrl_base + AR71XX_USB_CTRL_REG_FLADJ);
+-
+- iounmap(usb_ctrl_base);
+-
+- ath79_usb_register("ohci-platform", -1,
+- AR7240_OHCI_BASE, AR7240_OHCI_SIZE,
+- ATH79_CPU_IRQ(3),
+- &ath79_ohci_pdata, sizeof(ath79_ohci_pdata));
+-}
+-
+-static void __init ar724x_usb_setup(void)
+-{
+- ath79_device_reset_set(AR724X_RESET_USBSUS_OVERRIDE);
+- mdelay(10);
+-
+- ath79_device_reset_clear(AR724X_RESET_USB_HOST);
+- mdelay(10);
+-
+- ath79_device_reset_clear(AR724X_RESET_USB_PHY);
+- mdelay(10);
+-
+- ath79_usb_register("ehci-platform", -1,
+- AR724X_EHCI_BASE, AR724X_EHCI_SIZE,
+- ATH79_CPU_IRQ(3),
+- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
+-}
+-
+-static void __init ar913x_usb_setup(void)
+-{
+- ath79_device_reset_set(AR913X_RESET_USBSUS_OVERRIDE);
+- mdelay(10);
+-
+- ath79_device_reset_clear(AR913X_RESET_USB_HOST);
+- mdelay(10);
+-
+- ath79_device_reset_clear(AR913X_RESET_USB_PHY);
+- mdelay(10);
+-
+- ath79_usb_register("ehci-platform", -1,
+- AR913X_EHCI_BASE, AR913X_EHCI_SIZE,
+- ATH79_CPU_IRQ(3),
+- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
+-}
+-
+-static void __init ar933x_usb_setup(void)
+-{
+- ath79_device_reset_set(AR933X_RESET_USBSUS_OVERRIDE);
+- mdelay(10);
+-
+- ath79_device_reset_clear(AR933X_RESET_USB_HOST);
+- mdelay(10);
+-
+- ath79_device_reset_clear(AR933X_RESET_USB_PHY);
+- mdelay(10);
+-
+- ath79_usb_register("ehci-platform", -1,
+- AR933X_EHCI_BASE, AR933X_EHCI_SIZE,
+- ATH79_CPU_IRQ(3),
+- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
+-}
+-
+-static void __init ar934x_usb_setup(void)
+-{
+- u32 bootstrap;
+-
+- bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
+- if (bootstrap & AR934X_BOOTSTRAP_USB_MODE_DEVICE)
+- return;
+-
+- ath79_device_reset_set(AR934X_RESET_USBSUS_OVERRIDE);
+- udelay(1000);
+-
+- ath79_device_reset_clear(AR934X_RESET_USB_PHY);
+- udelay(1000);
+-
+- ath79_device_reset_clear(AR934X_RESET_USB_PHY_ANALOG);
+- udelay(1000);
+-
+- ath79_device_reset_clear(AR934X_RESET_USB_HOST);
+- udelay(1000);
+-
+- ath79_usb_register("ehci-platform", -1,
+- AR934X_EHCI_BASE, AR934X_EHCI_SIZE,
+- ATH79_CPU_IRQ(3),
+- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
+-}
+-
+-static void __init qca955x_usb_setup(void)
+-{
+- ath79_usb_register("ehci-platform", 0,
+- QCA955X_EHCI0_BASE, QCA955X_EHCI_SIZE,
+- ATH79_IP3_IRQ(0),
+- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
+-
+- ath79_usb_register("ehci-platform", 1,
+- QCA955X_EHCI1_BASE, QCA955X_EHCI_SIZE,
+- ATH79_IP3_IRQ(1),
+- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
+-}
+-
+-void __init ath79_register_usb(void)
+-{
+- if (soc_is_ar71xx())
+- ath79_usb_setup();
+- else if (soc_is_ar7240())
+- ar7240_usb_setup();
+- else if (soc_is_ar7241() || soc_is_ar7242())
+- ar724x_usb_setup();
+- else if (soc_is_ar913x())
+- ar913x_usb_setup();
+- else if (soc_is_ar933x())
+- ar933x_usb_setup();
+- else if (soc_is_ar934x())
+- ar934x_usb_setup();
+- else if (soc_is_qca955x())
+- qca955x_usb_setup();
+- else
+- BUG();
+-}
+--- a/arch/mips/ath79/dev-usb.h
++++ /dev/null
+@@ -1,17 +0,0 @@
+-/*
+- * Atheros AR71XX/AR724X/AR913X USB Host Controller support
+- *
+- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
+- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+- *
+- * This program is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License version 2 as published
+- * by the Free Software Foundation.
+- */
+-
+-#ifndef _ATH79_DEV_USB_H
+-#define _ATH79_DEV_USB_H
+-
+-void ath79_register_usb(void);
+-
+-#endif /* _ATH79_DEV_USB_H */
+--- a/arch/mips/ath79/dev-wmac.c
++++ /dev/null
+@@ -1,155 +0,0 @@
+-/*
+- * Atheros AR913X/AR933X SoC built-in WMAC device support
+- *
+- * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
+- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+- *
+- * Parts of this file are based on Atheros 2.6.15/2.6.31 BSP
+- *
+- * This program is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License version 2 as published
+- * by the Free Software Foundation.
+- */
+-
+-#include <linux/init.h>
+-#include <linux/delay.h>
+-#include <linux/irq.h>
+-#include <linux/platform_device.h>
+-#include <linux/ath9k_platform.h>
+-
+-#include <asm/mach-ath79/ath79.h>
+-#include <asm/mach-ath79/ar71xx_regs.h>
+-#include "dev-wmac.h"
+-
+-static struct ath9k_platform_data ath79_wmac_data;
+-
+-static struct resource ath79_wmac_resources[] = {
+- {
+- /* .start and .end fields are filled dynamically */
+- .flags = IORESOURCE_MEM,
+- }, {
+- /* .start and .end fields are filled dynamically */
+- .flags = IORESOURCE_IRQ,
+- },
+-};
+-
+-static struct platform_device ath79_wmac_device = {
+- .name = "ath9k",
+- .id = -1,
+- .resource = ath79_wmac_resources,
+- .num_resources = ARRAY_SIZE(ath79_wmac_resources),
+- .dev = {
+- .platform_data = &ath79_wmac_data,
+- },
+-};
+-
+-static void __init ar913x_wmac_setup(void)
+-{
+- /* reset the WMAC */
+- ath79_device_reset_set(AR913X_RESET_AMBA2WMAC);
+- mdelay(10);
+-
+- ath79_device_reset_clear(AR913X_RESET_AMBA2WMAC);
+- mdelay(10);
+-
+- ath79_wmac_resources[0].start = AR913X_WMAC_BASE;
+- ath79_wmac_resources[0].end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1;
+- ath79_wmac_resources[1].start = ATH79_CPU_IRQ(2);
+- ath79_wmac_resources[1].end = ATH79_CPU_IRQ(2);
+-}
+-
+-
+-static int ar933x_wmac_reset(void)
+-{
+- ath79_device_reset_set(AR933X_RESET_WMAC);
+- ath79_device_reset_clear(AR933X_RESET_WMAC);
+-
+- return 0;
+-}
+-
+-static int ar933x_r1_get_wmac_revision(void)
+-{
+- return ath79_soc_rev;
+-}
+-
+-static void __init ar933x_wmac_setup(void)
+-{
+- u32 t;
+-
+- ar933x_wmac_reset();
+-
+- ath79_wmac_device.name = "ar933x_wmac";
+-
+- ath79_wmac_resources[0].start = AR933X_WMAC_BASE;
+- ath79_wmac_resources[0].end = AR933X_WMAC_BASE + AR933X_WMAC_SIZE - 1;
+- ath79_wmac_resources[1].start = ATH79_CPU_IRQ(2);
+- ath79_wmac_resources[1].end = ATH79_CPU_IRQ(2);
+-
+- t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
+- if (t & AR933X_BOOTSTRAP_REF_CLK_40)
+- ath79_wmac_data.is_clk_25mhz = false;
+- else
+- ath79_wmac_data.is_clk_25mhz = true;
+-
+- if (ath79_soc_rev == 1)
+- ath79_wmac_data.get_mac_revision = ar933x_r1_get_wmac_revision;
+-
+- ath79_wmac_data.external_reset = ar933x_wmac_reset;
+-}
+-
+-static void ar934x_wmac_setup(void)
+-{
+- u32 t;
+-
+- ath79_wmac_device.name = "ar934x_wmac";
+-
+- ath79_wmac_resources[0].start = AR934X_WMAC_BASE;
+- ath79_wmac_resources[0].end = AR934X_WMAC_BASE + AR934X_WMAC_SIZE - 1;
+- ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1);
+- ath79_wmac_resources[1].end = ATH79_IP2_IRQ(1);
+-
+- t = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
+- if (t & AR934X_BOOTSTRAP_REF_CLK_40)
+- ath79_wmac_data.is_clk_25mhz = false;
+- else
+- ath79_wmac_data.is_clk_25mhz = true;
+-}
+-
+-static void qca955x_wmac_setup(void)
+-{
+- u32 t;
+-
+- ath79_wmac_device.name = "qca955x_wmac";
+-
+- ath79_wmac_resources[0].start = QCA955X_WMAC_BASE;
+- ath79_wmac_resources[0].end = QCA955X_WMAC_BASE + QCA955X_WMAC_SIZE - 1;
+- ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1);
+- ath79_wmac_resources[1].end = ATH79_IP2_IRQ(1);
+-
+- t = ath79_reset_rr(QCA955X_RESET_REG_BOOTSTRAP);
+- if (t & QCA955X_BOOTSTRAP_REF_CLK_40)
+- ath79_wmac_data.is_clk_25mhz = false;
+- else
+- ath79_wmac_data.is_clk_25mhz = true;
+-}
+-
+-void __init ath79_register_wmac(u8 *cal_data)
+-{
+- if (soc_is_ar913x())
+- ar913x_wmac_setup();
+- else if (soc_is_ar933x())
+- ar933x_wmac_setup();
+- else if (soc_is_ar934x())
+- ar934x_wmac_setup();
+- else if (soc_is_qca955x())
+- qca955x_wmac_setup();
+- else
+- BUG();
+-
+- if (cal_data)
+- memcpy(ath79_wmac_data.eeprom_data, cal_data,
+- sizeof(ath79_wmac_data.eeprom_data));
+-
+- platform_device_register(&ath79_wmac_device);
+-}
+--- a/arch/mips/ath79/dev-wmac.h
++++ /dev/null
+@@ -1,17 +0,0 @@
+-/*
+- * Atheros AR913X/AR933X SoC built-in WMAC device support
+- *
+- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+- *
+- * This program is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License version 2 as published
+- * by the Free Software Foundation.
+- */
+-
+-#ifndef _ATH79_DEV_WMAC_H
+-#define _ATH79_DEV_WMAC_H
+-
+-void ath79_register_wmac(u8 *cal_data);
+-
+-#endif /* _ATH79_DEV_WMAC_H */
+--- a/arch/mips/ath79/setup.c
++++ b/arch/mips/ath79/setup.c
+@@ -32,7 +32,6 @@
+ #include <asm/mach-ath79/ath79.h>
+ #include <asm/mach-ath79/ar71xx_regs.h>
+ #include "common.h"
+-#include "dev-common.h"
+
+ #define ATH79_SYS_TYPE_LEN 64
+
diff --git a/target/linux/ath79/patches-4.19/0031-MIPS-ath79-drop-OF-clock-code.patch b/target/linux/ath79/patches-4.19/0031-MIPS-ath79-drop-OF-clock-code.patch
new file mode 100644
index 00000000000..a11be73d7a8
--- /dev/null
+++ b/target/linux/ath79/patches-4.19/0031-MIPS-ath79-drop-OF-clock-code.patch
@@ -0,0 +1,95 @@
+From 00e4313da4609074fff134e61dd9ffe3fd37474d Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Sun, 24 Jun 2018 09:39:41 +0200
+Subject: [PATCH 31/33] MIPS: ath79: drop !OF clock code
+
+With the target now being fully OF based, we can drop the legacy clock
+registration code. All clocks are now probed via devicetree.
+
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ arch/mips/ath79/clock.c | 56 ------------------------------------------------
+ arch/mips/ath79/common.h | 3 ---
+ 2 files changed, 59 deletions(-)
+
+--- a/arch/mips/ath79/clock.c
++++ b/arch/mips/ath79/clock.c
+@@ -617,60 +617,6 @@ static void __init qca956x_clocks_init(v
+ ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
+ }
+
+-void __init ath79_clocks_init(void)
+-{
+- const char *wdt;
+- const char *uart;
+-
+- if (soc_is_ar71xx())
+- ar71xx_clocks_init(ath79_pll_base);
+- else if (soc_is_ar724x() || soc_is_ar913x())
+- ar724x_clocks_init(ath79_pll_base);
+- else if (soc_is_ar933x())
+- ar933x_clocks_init(ath79_pll_base);
+- else if (soc_is_ar934x())
+- ar934x_clocks_init(ath79_pll_base);
+- else if (soc_is_qca953x())
+- qca953x_clocks_init(ath79_pll_base);
+- else if (soc_is_qca955x())
+- qca955x_clocks_init(ath79_pll_base);
+- else if (soc_is_qca956x() || soc_is_tp9343())
+- qca956x_clocks_init(ath79_pll_base);
+- else
+- BUG();
+-
+- if (soc_is_ar71xx() || soc_is_ar724x() || soc_is_ar913x()) {
+- wdt = "ahb";
+- uart = "ahb";
+- } else if (soc_is_ar933x()) {
+- wdt = "ahb";
+- uart = "ref";
+- } else {
+- wdt = "ref";
+- uart = "ref";
+- }
+-
+- clk_add_alias("wdt", NULL, wdt, NULL);
+- clk_add_alias("uart", NULL, uart, NULL);
+-}
+-
+-unsigned long __init
+-ath79_get_sys_clk_rate(const char *id)
+-{
+- struct clk *clk;
+- unsigned long rate;
+-
+- clk = clk_get(NULL, id);
+- if (IS_ERR(clk))
+- panic("unable to get %s clock, err=%d", id, (int) PTR_ERR(clk));
+-
+- rate = clk_get_rate(clk);
+- clk_put(clk);
+-
+- return rate;
+-}
+-
+-#ifdef CONFIG_OF
+ static void __init ath79_clocks_init_dt(struct device_node *np)
+ {
+ struct clk *ref_clk;
+@@ -727,5 +673,3 @@ CLK_OF_DECLARE(ar9340_clk, "qca,ar9340-p
+ CLK_OF_DECLARE(ar9530_clk, "qca,qca9530-pll", ath79_clocks_init_dt);
+ CLK_OF_DECLARE(ar9550_clk, "qca,qca9550-pll", ath79_clocks_init_dt);
+ CLK_OF_DECLARE(ar9560_clk, "qca,qca9560-pll", ath79_clocks_init_dt);
+-
+-#endif
+--- a/arch/mips/ath79/common.h
++++ b/arch/mips/ath79/common.h
+@@ -19,9 +19,6 @@
+ #define ATH79_MEM_SIZE_MIN (2 * 1024 * 1024)
+ #define ATH79_MEM_SIZE_MAX (256 * 1024 * 1024)
+
+-void ath79_clocks_init(void);
+-unsigned long ath79_get_sys_clk_rate(const char *id);
+-
+ void ath79_ddr_ctrl_init(void);
+
+ #endif /* __ATH79_COMMON_H */
diff --git a/target/linux/ath79/patches-4.19/0032-MIPS-ath79-sanitize-symbols.patch b/target/linux/ath79/patches-4.19/0032-MIPS-ath79-sanitize-symbols.patch
new file mode 100644
index 00000000000..1c38139323e
--- /dev/null
+++ b/target/linux/ath79/patches-4.19/0032-MIPS-ath79-sanitize-symbols.patch
@@ -0,0 +1,93 @@
+From 3fc8585cf76022dba7496627074d42af88c30718 Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Sat, 23 Jun 2018 15:16:55 +0200
+Subject: [PATCH 32/33] MIPS: ath79: sanitize symbols
+
+We no longer need to select which SoCs are supported as the whole arch
+code is always built. So lets drop all the SoC symbols
+
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ arch/mips/Kconfig | 2 ++
+ arch/mips/ath79/Kconfig | 44 +++++---------------------------------------
+ arch/mips/pci/Makefile | 2 +-
+ 3 files changed, 8 insertions(+), 40 deletions(-)
+
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -208,6 +208,8 @@ config ATH79
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_MIPS16
+ select SYS_SUPPORTS_ZBOOT_UART_PROM
++ select HW_HAS_PCI
++ select USB_ARCH_HAS_EHCI
+ select USE_OF
+ select USB_EHCI_ROOT_HUB_TT if USB_EHCI_HCD_PLATFORM
+ help
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -1,48 +1,14 @@
+ # SPDX-License-Identifier: GPL-2.0
+ if ATH79
+
+-config SOC_AR71XX
+- select HW_HAS_PCI
+- def_bool n
+-
+-config SOC_AR724X
+- select HW_HAS_PCI
+- select PCI_AR724X if PCI
+- def_bool n
+-
+-config SOC_AR913X
+- def_bool n
+-
+-config SOC_AR933X
+- def_bool n
+-
+-config SOC_AR934X
+- select HW_HAS_PCI
+- select PCI_AR724X if PCI
+- def_bool n
+-
+-config SOC_QCA955X
+- select HW_HAS_PCI
+- select PCI_AR724X if PCI
++config PCI_AR71XX
++ bool "PCI support for AR7100 type SoCs"
++ depends on PCI
+ def_bool n
+
+ config PCI_AR724X
+- def_bool n
+-
+-config ATH79_DEV_GPIO_BUTTONS
+- def_bool n
+-
+-config ATH79_DEV_LEDS_GPIO
+- def_bool n
+-
+-config ATH79_DEV_SPI
+- def_bool n
+-
+-config ATH79_DEV_USB
+- def_bool n
+-
+-config ATH79_DEV_WMAC
+- depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X)
++ bool "PCI support for AR724x type SoCs"
++ depends on PCI
+ def_bool n
+
+ endif
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -23,7 +23,7 @@ obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o
+ ops-bcm63xx.o
+ obj-$(CONFIG_MIPS_ALCHEMY) += pci-alchemy.o
+ obj-$(CONFIG_PCI_AR2315) += pci-ar2315.o
+-obj-$(CONFIG_SOC_AR71XX) += pci-ar71xx.o
++obj-$(CONFIG_PCI_AR71XX) += pci-ar71xx.o
+ obj-$(CONFIG_PCI_AR724X) += pci-ar724x.o
+ obj-$(CONFIG_MIPS_PCI_VIRTIO) += pci-virtio-guest.o
+ #
diff --git a/target/linux/ath79/patches-4.19/0033-spi-ath79-drop-pdata-support.patch b/target/linux/ath79/patches-4.19/0033-spi-ath79-drop-pdata-support.patch
new file mode 100644
index 00000000000..aeb50c9b1ca
--- /dev/null
+++ b/target/linux/ath79/patches-4.19/0033-spi-ath79-drop-pdata-support.patch
@@ -0,0 +1,73 @@
+From c4e197bbcecc7233aa9e553e7047fa50e4e1fe77 Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Mon, 25 Jun 2018 15:52:34 +0200
+Subject: [PATCH 33/33] spi: ath79: drop pdata support
+
+The target is being converted to pure OF. We can therefore drop all of the
+platform data code from the driver.
+
+Cc: linux-spi@vger.kernel.org
+Acked-by: Mark Brown <broonie@kernel.org>
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ arch/mips/include/asm/mach-ath79/ath79_spi_platform.h | 19 -------------------
+ drivers/spi/spi-ath79.c | 8 --------
+ 2 files changed, 27 deletions(-)
+ delete mode 100644 arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
+
+--- a/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
++++ /dev/null
+@@ -1,19 +0,0 @@
+-/*
+- * Platform data definition for Atheros AR71XX/AR724X/AR913X SPI controller
+- *
+- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
+- *
+- * This program is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License version 2 as published
+- * by the Free Software Foundation.
+- */
+-
+-#ifndef _ATH79_SPI_PLATFORM_H
+-#define _ATH79_SPI_PLATFORM_H
+-
+-struct ath79_spi_platform_data {
+- unsigned bus_num;
+- unsigned num_chipselect;
+-};
+-
+-#endif /* _ATH79_SPI_PLATFORM_H */
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
+@@ -26,7 +26,6 @@
+ #include <linux/err.h>
+
+ #include <asm/mach-ath79/ar71xx_regs.h>
+-#include <asm/mach-ath79/ath79_spi_platform.h>
+
+ #define DRV_NAME "ath79-spi"
+
+@@ -208,7 +207,6 @@ static int ath79_spi_probe(struct platfo
+ {
+ struct spi_master *master;
+ struct ath79_spi *sp;
+- struct ath79_spi_platform_data *pdata;
+ struct resource *r;
+ unsigned long rate;
+ int ret;
+@@ -223,15 +221,9 @@ static int ath79_spi_probe(struct platfo
+ master->dev.of_node = pdev->dev.of_node;
+ platform_set_drvdata(pdev, sp);
+
+- pdata = dev_get_platdata(&pdev->dev);
+-
+ master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
+ master->setup = ath79_spi_setup;
+ master->cleanup = ath79_spi_cleanup;
+- if (pdata) {
+- master->bus_num = pdata->bus_num;
+- master->num_chipselect = pdata->num_chipselect;
+- }
+
+ sp->bitbang.master = master;
+ sp->bitbang.chipselect = ath79_spi_chipselect;
diff --git a/target/linux/ath79/patches-4.19/0034-MIPS-ath79-ath9k-exports.patch b/target/linux/ath79/patches-4.19/0034-MIPS-ath79-ath9k-exports.patch
new file mode 100644
index 00000000000..6eec142c746
--- /dev/null
+++ b/target/linux/ath79/patches-4.19/0034-MIPS-ath79-ath9k-exports.patch
@@ -0,0 +1,27 @@
+--- a/arch/mips/ath79/common.c
++++ b/arch/mips/ath79/common.c
+@@ -34,11 +34,13 @@ EXPORT_SYMBOL_GPL(ath79_ddr_freq);
+
+ enum ath79_soc_type ath79_soc;
+ unsigned int ath79_soc_rev;
++EXPORT_SYMBOL_GPL(ath79_soc_rev);
+
+ void __iomem *ath79_pll_base;
+ void __iomem *ath79_reset_base;
+ EXPORT_SYMBOL_GPL(ath79_reset_base);
+-static void __iomem *ath79_ddr_base;
++void __iomem *ath79_ddr_base;
++EXPORT_SYMBOL_GPL(ath79_ddr_base);
+ static void __iomem *ath79_ddr_wb_flush_base;
+ static void __iomem *ath79_ddr_pci_win_base;
+
+--- a/arch/mips/include/asm/mach-ath79/ath79.h
++++ b/arch/mips/include/asm/mach-ath79/ath79.h
+@@ -152,6 +152,7 @@ void ath79_ddr_wb_flush(unsigned int reg
+ void ath79_ddr_set_pci_windows(void);
+
+ extern void __iomem *ath79_pll_base;
++extern void __iomem *ath79_ddr_base;
+ extern void __iomem *ath79_reset_base;
+
+ static inline void ath79_pll_wr(unsigned reg, u32 val)
diff --git a/target/linux/ath79/patches-4.19/0036-GPIO-add-named-gpio-exports.patch b/target/linux/ath79/patches-4.19/0036-GPIO-add-named-gpio-exports.patch
new file mode 100644
index 00000000000..9c728b91f5e
--- /dev/null
+++ b/target/linux/ath79/patches-4.19/0036-GPIO-add-named-gpio-exports.patch
@@ -0,0 +1,165 @@
+From 4267880319bc1a2270d352e0ded6d6386242a7ef Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 12 Aug 2014 20:49:27 +0200
+Subject: [PATCH 24/53] GPIO: add named gpio exports
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/gpio/gpiolib-of.c | 68 +++++++++++++++++++++++++++++++++++++++++
+ drivers/gpio/gpiolib-sysfs.c | 10 +++++-
+ include/asm-generic/gpio.h | 6 ++++
+ include/linux/gpio/consumer.h | 8 +++++
+ 4 files changed, 91 insertions(+), 1 deletion(-)
+
+--- a/drivers/gpio/gpiolib-of.c
++++ b/drivers/gpio/gpiolib-of.c
+@@ -23,6 +23,8 @@
+ #include <linux/pinctrl/pinctrl.h>
+ #include <linux/slab.h>
+ #include <linux/gpio/machine.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
+
+ #include "gpiolib.h"
+
+@@ -654,3 +656,68 @@ void of_gpiochip_remove(struct gpio_chip
+ gpiochip_remove_pin_ranges(chip);
+ of_node_put(chip->of_node);
+ }
++
++static struct of_device_id gpio_export_ids[] = {
++ { .compatible = "gpio-export" },
++ { /* sentinel */ }
++};
++
++static int of_gpio_export_probe(struct platform_device *pdev)
++{
++ struct device_node *np = pdev->dev.of_node;
++ struct device_node *cnp;
++ u32 val;
++ int nb = 0;
++
++ for_each_child_of_node(np, cnp) {
++ const char *name = NULL;
++ int gpio;
++ bool dmc;
++ int max_gpio = 1;
++ int i;
++
++ of_property_read_string(cnp, "gpio-export,name", &name);
++
++ if (!name)
++ max_gpio = of_gpio_count(cnp);
++
++ for (i = 0; i < max_gpio; i++) {
++ unsigned flags = 0;
++ enum of_gpio_flags of_flags;
++
++ gpio = of_get_gpio_flags(cnp, i, &of_flags);
++ if (!gpio_is_valid(gpio))
++ return gpio;
++
++ if (of_flags == OF_GPIO_ACTIVE_LOW)
++ flags |= GPIOF_ACTIVE_LOW;
++
++ if (!of_property_read_u32(cnp, "gpio-export,output", &val))
++ flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
++ else
++ flags |= GPIOF_IN;
++
++ if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np)))
++ continue;
++
++ dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change");
++ gpio_export_with_name(gpio, dmc, name);
++ nb++;
++ }
++ }
++
++ dev_info(&pdev->dev, "%d gpio(s) exported\n", nb);
++
++ return 0;
++}
++
++static struct platform_driver gpio_export_driver = {
++ .driver = {
++ .name = "gpio-export",
++ .owner = THIS_MODULE,
++ .of_match_table = of_match_ptr(gpio_export_ids),
++ },
++ .probe = of_gpio_export_probe,
++};
++
++module_platform_driver(gpio_export_driver);
+--- a/drivers/gpio/gpiolib-sysfs.c
++++ b/drivers/gpio/gpiolib-sysfs.c
+@@ -568,7 +568,7 @@ static struct class gpio_class = {
+ *
+ * Returns zero on success, else an error.
+ */
+-int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
++int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name)
+ {
+ struct gpio_chip *chip;
+ struct gpio_device *gdev;
+@@ -630,6 +630,8 @@ int gpiod_export(struct gpio_desc *desc,
+ offset = gpio_chip_hwgpio(desc);
+ if (chip->names && chip->names[offset])
+ ioname = chip->names[offset];
++ if (name)
++ ioname = name;
+
+ dev = device_create_with_groups(&gpio_class, &gdev->dev,
+ MKDEV(0, 0), data, gpio_groups,
+@@ -651,6 +653,12 @@ err_unlock:
+ gpiod_dbg(desc, "%s: status %d\n", __func__, status);
+ return status;
+ }
++EXPORT_SYMBOL_GPL(__gpiod_export);
++
++int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
++{
++ return __gpiod_export(desc, direction_may_change, NULL);
++}
+ EXPORT_SYMBOL_GPL(gpiod_export);
+
+ static int match_export(struct device *dev, const void *desc)
+--- a/include/asm-generic/gpio.h
++++ b/include/asm-generic/gpio.h
+@@ -127,6 +127,12 @@ static inline int gpio_export(unsigned g
+ return gpiod_export(gpio_to_desc(gpio), direction_may_change);
+ }
+
++int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
++static inline int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name)
++{
++ return __gpiod_export(gpio_to_desc(gpio), direction_may_change, name);
++}
++
+ static inline int gpio_export_link(struct device *dev, const char *name,
+ unsigned gpio)
+ {
+--- a/include/linux/gpio/consumer.h
++++ b/include/linux/gpio/consumer.h
+@@ -531,6 +531,7 @@ struct gpio_desc *devm_fwnode_get_gpiod_
+
+ #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS)
+
++int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
+ int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
+ int gpiod_export_link(struct device *dev, const char *name,
+ struct gpio_desc *desc);
+@@ -538,6 +539,13 @@ void gpiod_unexport(struct gpio_desc *de
+
+ #else /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */
+
++static inline int _gpiod_export(struct gpio_desc *desc,
++ bool direction_may_change,
++ const char *name)
++{
++ return -ENOSYS;
++}
++
+ static inline int gpiod_export(struct gpio_desc *desc,
+ bool direction_may_change)
+ {
diff --git a/target/linux/ath79/patches-4.19/0036-MIPS-ath79-remove-irq-code-from-pci.patch b/target/linux/ath79/patches-4.19/0036-MIPS-ath79-remove-irq-code-from-pci.patch
new file mode 100644
index 00000000000..460c4580eed
--- /dev/null
+++ b/target/linux/ath79/patches-4.19/0036-MIPS-ath79-remove-irq-code-from-pci.patch
@@ -0,0 +1,139 @@
+--- a/arch/mips/pci/pci-ar71xx.c
++++ b/arch/mips/pci/pci-ar71xx.c
+@@ -54,11 +54,9 @@
+ struct ar71xx_pci_controller {
+ struct device_node *np;
+ void __iomem *cfg_base;
+- int irq;
+ struct pci_controller pci_ctrl;
+ struct resource io_res;
+ struct resource mem_res;
+- struct irq_domain *domain;
+ };
+
+ /* Byte lane enable bits */
+@@ -230,104 +228,6 @@ static struct pci_ops ar71xx_pci_ops = {
+ .write = ar71xx_pci_write_config,
+ };
+
+-static void ar71xx_pci_irq_handler(struct irq_desc *desc)
+-{
+- void __iomem *base = ath79_reset_base;
+- struct irq_chip *chip = irq_desc_get_chip(desc);
+- struct ar71xx_pci_controller *apc = irq_desc_get_handler_data(desc);
+- u32 pending;
+-
+- chained_irq_enter(chip, desc);
+- pending = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_STATUS) &
+- __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+-
+- if (pending & AR71XX_PCI_INT_DEV0)
+- generic_handle_irq(irq_linear_revmap(apc->domain, 1));
+-
+- else if (pending & AR71XX_PCI_INT_DEV1)
+- generic_handle_irq(irq_linear_revmap(apc->domain, 2));
+-
+- else if (pending & AR71XX_PCI_INT_DEV2)
+- generic_handle_irq(irq_linear_revmap(apc->domain, 3));
+-
+- else if (pending & AR71XX_PCI_INT_CORE)
+- generic_handle_irq(irq_linear_revmap(apc->domain, 4));
+-
+- else
+- spurious_interrupt();
+- chained_irq_exit(chip, desc);
+-}
+-
+-static void ar71xx_pci_irq_unmask(struct irq_data *d)
+-{
+- struct ar71xx_pci_controller *apc;
+- unsigned int irq;
+- void __iomem *base = ath79_reset_base;
+- u32 t;
+-
+- apc = irq_data_get_irq_chip_data(d);
+- irq = irq_linear_revmap(apc->domain, d->irq);
+-
+- t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+- __raw_writel(t | (1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+-
+- /* flush write */
+- __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+-}
+-
+-static void ar71xx_pci_irq_mask(struct irq_data *d)
+-{
+- struct ar71xx_pci_controller *apc;
+- unsigned int irq;
+- void __iomem *base = ath79_reset_base;
+- u32 t;
+-
+- apc = irq_data_get_irq_chip_data(d);
+- irq = irq_linear_revmap(apc->domain, d->irq);
+-
+- t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+- __raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+-
+- /* flush write */
+- __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+-}
+-
+-static struct irq_chip ar71xx_pci_irq_chip = {
+- .name = "AR71XX PCI",
+- .irq_mask = ar71xx_pci_irq_mask,
+- .irq_unmask = ar71xx_pci_irq_unmask,
+- .irq_mask_ack = ar71xx_pci_irq_mask,
+-};
+-
+-static int ar71xx_pci_irq_map(struct irq_domain *d,
+- unsigned int irq, irq_hw_number_t hw)
+-{
+- struct ar71xx_pci_controller *apc = d->host_data;
+-
+- irq_set_chip_and_handler(irq, &ar71xx_pci_irq_chip, handle_level_irq);
+- irq_set_chip_data(irq, apc);
+-
+- return 0;
+-}
+-
+-static const struct irq_domain_ops ar71xx_pci_domain_ops = {
+- .xlate = irq_domain_xlate_onecell,
+- .map = ar71xx_pci_irq_map,
+-};
+-
+-static void ar71xx_pci_irq_init(struct ar71xx_pci_controller *apc)
+-{
+- void __iomem *base = ath79_reset_base;
+-
+- __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+- __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_STATUS);
+-
+- apc->domain = irq_domain_add_linear(apc->np, AR71XX_PCI_IRQ_COUNT,
+- &ar71xx_pci_domain_ops, apc);
+- irq_set_chained_handler_and_data(apc->irq, ar71xx_pci_irq_handler,
+- apc);
+-}
+-
+ static void ar71xx_pci_reset(void)
+ {
+ ath79_device_reset_set(AR71XX_RESET_PCI_BUS | AR71XX_RESET_PCI_CORE);
+@@ -361,10 +261,6 @@ static int ar71xx_pci_probe(struct platf
+ if (IS_ERR(apc->cfg_base))
+ return PTR_ERR(apc->cfg_base);
+
+- apc->irq = platform_get_irq(pdev, 0);
+- if (apc->irq < 0)
+- return -EINVAL;
+-
+ ar71xx_pci_reset();
+
+ /* setup COMMAND register */
+@@ -375,8 +271,6 @@ static int ar71xx_pci_probe(struct platf
+ /* clear bus errors */
+ ar71xx_pci_check_error(apc, 1);
+
+- ar71xx_pci_irq_init(apc);
+-
+ apc->np = pdev->dev.of_node;
+ apc->pci_ctrl.pci_ops = &ar71xx_pci_ops;
+ apc->pci_ctrl.mem_resource = &apc->mem_res;
diff --git a/target/linux/ath79/patches-4.19/0037-missing-registers.patch b/target/linux/ath79/patches-4.19/0037-missing-registers.patch
new file mode 100644
index 00000000000..9fde3d39df9
--- /dev/null
+++ b/target/linux/ath79/patches-4.19/0037-missing-registers.patch
@@ -0,0 +1,21 @@
+commit f3ffac90bc7266b7d917616f3233f58e8c08a196
+Author: Christian Lamparter <chunkeey@gmail.com>
+Date: Fri Aug 10 23:24:47 2018 +0200
+
+ ath79: gmac: add parsers for rxd(v)- and tx(d|en)-delay for AR9344
+
+ Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -1229,6 +1229,10 @@
+ #define AR934X_ETH_CFG_RDV_DELAY BIT(16)
+ #define AR934X_ETH_CFG_RDV_DELAY_MASK 0x3
+ #define AR934X_ETH_CFG_RDV_DELAY_SHIFT 16
++#define AR934X_ETH_CFG_TXD_DELAY_MASK 0x3
++#define AR934X_ETH_CFG_TXD_DELAY_SHIFT 18
++#define AR934X_ETH_CFG_TXE_DELAY_MASK 0x3
++#define AR934X_ETH_CFG_TXE_DELAY_SHIFT 20
+
+ /*
+ * QCA953X GMAC Interface
diff --git a/target/linux/ath79/patches-4.19/004-register_gpio_driver_earlier.patch b/target/linux/ath79/patches-4.19/004-register_gpio_driver_earlier.patch
new file mode 100644
index 00000000000..78899c45e3d
--- /dev/null
+++ b/target/linux/ath79/patches-4.19/004-register_gpio_driver_earlier.patch
@@ -0,0 +1,18 @@
+HACK: register the GPIO driver earlier to ensure that gpio_request calls
+from mach files succeed.
+
+--- a/drivers/gpio/gpio-ath79.c
++++ b/drivers/gpio/gpio-ath79.c
+@@ -325,7 +325,11 @@ static struct platform_driver ath79_gpio
+ .remove = ath79_gpio_remove,
+ };
+
+-module_platform_driver(ath79_gpio_driver);
++static int __init ath79_gpio_init(void)
++{
++ return platform_driver_register(&ath79_gpio_driver);
++}
++postcore_initcall(ath79_gpio_init);
+
+ MODULE_DESCRIPTION("Atheros AR71XX/AR724X/AR913X GPIO API support");
+ MODULE_LICENSE("GPL v2");
diff --git a/target/linux/ath79/patches-4.19/403-mtd_fix_cfi_cmdset_0002_status_check.patch b/target/linux/ath79/patches-4.19/403-mtd_fix_cfi_cmdset_0002_status_check.patch
new file mode 100644
index 00000000000..eeda6209573
--- /dev/null
+++ b/target/linux/ath79/patches-4.19/403-mtd_fix_cfi_cmdset_0002_status_check.patch
@@ -0,0 +1,64 @@
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -1634,8 +1634,8 @@ static int __xipram do_write_oneword(str
+ break;
+ }
+
+- if (chip_ready(map, adr))
+- break;
++ if (chip_good(map, adr, datum))
++ goto enable_xip;
+
+ /* Latency issues. Drop the lock, wait a while and retry */
+ UDELAY(map, chip, adr, 1);
+@@ -1651,6 +1651,8 @@ static int __xipram do_write_oneword(str
+
+ ret = -EIO;
+ }
++
++ enable_xip:
+ xip_enable(map, chip, adr);
+ op_done:
+ if (mode == FL_OTP_WRITE)
+@@ -2229,7 +2231,6 @@ static int cfi_amdstd_panic_write(struct
+ return 0;
+ }
+
+-
+ /*
+ * Handle devices with one erase region, that only implement
+ * the chip erase command.
+@@ -2297,7 +2298,7 @@ static int __xipram do_erase_chip(struct
+ }
+
+ if (chip_good(map, adr, map_word_ff(map)))
+- break;
++ goto op_done;
+
+ if (time_after(jiffies, timeo)) {
+ printk(KERN_WARNING "MTD %s(): software timeout\n",
+@@ -2321,6 +2322,7 @@ static int __xipram do_erase_chip(struct
+ }
+ }
+
++ op_done:
+ chip->state = FL_READY;
+ xip_enable(map, chip, adr);
+ DISABLE_VPP(map);
+@@ -2393,7 +2395,7 @@ static int __xipram do_erase_oneblock(st
+ }
+
+ if (chip_good(map, adr, map_word_ff(map)))
+- break;
++ goto op_done;
+
+ if (time_after(jiffies, timeo)) {
+ printk(KERN_WARNING "MTD %s(): software timeout\n",
+@@ -2417,6 +2419,7 @@ static int __xipram do_erase_oneblock(st
+ }
+ }
+
++ op_done:
+ chip->state = FL_READY;
+ xip_enable(map, chip, adr);
+ DISABLE_VPP(map);
diff --git a/target/linux/ath79/patches-4.19/404-mtd-cybertan-trx-parser.patch b/target/linux/ath79/patches-4.19/404-mtd-cybertan-trx-parser.patch
new file mode 100644
index 00000000000..22e31db3fab
--- /dev/null
+++ b/target/linux/ath79/patches-4.19/404-mtd-cybertan-trx-parser.patch
@@ -0,0 +1,20 @@
+--- a/drivers/mtd/parsers/Makefile
++++ b/drivers/mtd/parsers/Makefile
+@@ -1,2 +1,3 @@
++obj-$(CONFIG_MTD_PARSER_CYBERTAN) += parser_cybertan.o
+ obj-$(CONFIG_MTD_PARSER_TRX) += parser_trx.o
+ obj-$(CONFIG_MTD_SHARPSL_PARTS) += sharpslpart.o
+--- a/drivers/mtd/parsers/Kconfig
++++ b/drivers/mtd/parsers/Kconfig
+@@ -1,3 +1,11 @@
++config MTD_PARSER_CYBERTAN
++ tristate "Parser for Cybertan format partitions"
++ depends on MTD && (ATH79 || COMPILE_TEST)
++ help
++ Cybertan has a proprietory header than encompasses a Broadcom trx
++ header. This driver will parse the header and take care of the
++ special offsets that result in the extra headers.
++
+ config MTD_PARSER_TRX
+ tristate "Parser for TRX format partitions"
+ depends on MTD && (BCM47XX || ARCH_BCM_5301X || COMPILE_TEST)
diff --git a/target/linux/ath79/patches-4.19/405-mtd-tp-link-partition-parser.patch b/target/linux/ath79/patches-4.19/405-mtd-tp-link-partition-parser.patch
new file mode 100644
index 00000000000..16fe5ed2720
--- /dev/null
+++ b/target/linux/ath79/patches-4.19/405-mtd-tp-link-partition-parser.patch
@@ -0,0 +1,25 @@
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -193,6 +193,12 @@ config MTD_MYLOADER_PARTS
+ You will still need the parsing functions to be called by the driver
+ for your particular device. It won't happen automatically.
+
++config MTD_TPLINK_PARTS
++ tristate "TP-Link AR7XXX/AR9XXX partitioning support"
++ depends on ATH79
++ ---help---
++ TBD.
++
+ comment "User Modules And Translation Layers"
+
+ #
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -18,6 +18,7 @@ obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63
+ obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o
+ obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
+ obj-y += parsers/
++obj-$(CONFIG_MTD_TPLINK_PARTS) += tplinkpart.o
+
+ # 'Users' - code which presents functionality to userspace.
+ obj-$(CONFIG_MTD_BLKDEVS) += mtd_blkdevs.o
diff --git a/target/linux/ath79/patches-4.19/420-net-ar71xx_mac_driver.patch b/target/linux/ath79/patches-4.19/420-net-ar71xx_mac_driver.patch
new file mode 100644
index 00000000000..6377db0ac22
--- /dev/null
+++ b/target/linux/ath79/patches-4.19/420-net-ar71xx_mac_driver.patch
@@ -0,0 +1,28 @@
+--- a/drivers/net/ethernet/atheros/Kconfig
++++ b/drivers/net/ethernet/atheros/Kconfig
+@@ -5,7 +5,7 @@
+ config NET_VENDOR_ATHEROS
+ bool "Atheros devices"
+ default y
+- depends on PCI
++ depends on (PCI || ATH79)
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y.
+
+@@ -78,4 +78,6 @@ config ALX
+ To compile this driver as a module, choose M here. The module
+ will be called alx.
+
++source drivers/net/ethernet/atheros/ag71xx/Kconfig
++
+ endif # NET_VENDOR_ATHEROS
+--- a/drivers/net/ethernet/atheros/Makefile
++++ b/drivers/net/ethernet/atheros/Makefile
+@@ -3,6 +3,7 @@
+ # Makefile for the Atheros network device drivers.
+ #
+
++obj-$(CONFIG_AG71XX) += ag71xx/
+ obj-$(CONFIG_ATL1) += atlx/
+ obj-$(CONFIG_ATL2) += atlx/
+ obj-$(CONFIG_ATL1E) += atl1e/
diff --git a/target/linux/ath79/patches-4.19/430-drivers-link-spi-before-mtd.patch b/target/linux/ath79/patches-4.19/430-drivers-link-spi-before-mtd.patch
new file mode 100644
index 00000000000..4c6558db90c
--- /dev/null
+++ b/target/linux/ath79/patches-4.19/430-drivers-link-spi-before-mtd.patch
@@ -0,0 +1,12 @@
+--- a/drivers/Makefile
++++ b/drivers/Makefile
+@@ -80,8 +80,8 @@ obj-y += scsi/
+ obj-y += nvme/
+ obj-$(CONFIG_ATA) += ata/
+ obj-$(CONFIG_TARGET_CORE) += target/
+-obj-$(CONFIG_MTD) += mtd/
+ obj-$(CONFIG_SPI) += spi/
++obj-$(CONFIG_MTD) += mtd/
+ obj-$(CONFIG_SPMI) += spmi/
+ obj-$(CONFIG_HSI) += hsi/
+ obj-$(CONFIG_SLIMBUS) += slimbus/
diff --git a/target/linux/ath79/patches-4.19/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch b/target/linux/ath79/patches-4.19/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch
new file mode 100644
index 00000000000..634ce563542
--- /dev/null
+++ b/target/linux/ath79/patches-4.19/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch
@@ -0,0 +1,98 @@
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ath79/mangle-port.h
+@@ -0,0 +1,37 @@
++/*
++ * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This file was derived from: inlude/asm-mips/mach-generic/mangle-port.h
++ * Copyright (C) 2003, 2004 Ralf Baechle
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#ifndef __ASM_MACH_ATH79_MANGLE_PORT_H
++#define __ASM_MACH_ATH79_MANGLE_PORT_H
++
++#ifdef CONFIG_PCI_AR71XX
++extern unsigned long (ath79_pci_swizzle_b)(unsigned long port);
++extern unsigned long (ath79_pci_swizzle_w)(unsigned long port);
++#else
++#define ath79_pci_swizzle_b(port) (port)
++#define ath79_pci_swizzle_w(port) (port)
++#endif
++
++#define __swizzle_addr_b(port) ath79_pci_swizzle_b(port)
++#define __swizzle_addr_w(port) ath79_pci_swizzle_w(port)
++#define __swizzle_addr_l(port) (port)
++#define __swizzle_addr_q(port) (port)
++
++# define ioswabb(a, x) (x)
++# define __mem_ioswabb(a, x) (x)
++# define ioswabw(a, x) (x)
++# define __mem_ioswabw(a, x) cpu_to_le16(x)
++# define ioswabl(a, x) (x)
++# define __mem_ioswabl(a, x) cpu_to_le32(x)
++# define ioswabq(a, x) (x)
++# define __mem_ioswabq(a, x) cpu_to_le64(x)
++
++#endif /* __ASM_MACH_ATH79_MANGLE_PORT_H */
+--- a/arch/mips/pci/pci-ar71xx.c
++++ b/arch/mips/pci/pci-ar71xx.c
+@@ -71,6 +71,45 @@ static const u32 ar71xx_pci_read_mask[8]
+ 0, 0xff, 0xffff, 0, 0xffffffff, 0, 0, 0
+ };
+
++static unsigned long (*__ath79_pci_swizzle_b)(unsigned long port);
++static unsigned long (*__ath79_pci_swizzle_w)(unsigned long port);
++
++static inline bool ar71xx_is_pci_addr(unsigned long port)
++{
++ unsigned long phys = CPHYSADDR(port);
++
++ return (phys >= AR71XX_PCI_MEM_BASE &&
++ phys < AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE);
++}
++
++static unsigned long ar71xx_pci_swizzle_b(unsigned long port)
++{
++ return ar71xx_is_pci_addr(port) ? port ^ 3 : port;
++}
++
++static unsigned long ar71xx_pci_swizzle_w(unsigned long port)
++{
++ return ar71xx_is_pci_addr(port) ? port ^ 2 : port;
++}
++
++unsigned long ath79_pci_swizzle_b(unsigned long port)
++{
++ if (__ath79_pci_swizzle_b)
++ return __ath79_pci_swizzle_b(port);
++
++ return port;
++}
++EXPORT_SYMBOL(ath79_pci_swizzle_b);
++
++unsigned long ath79_pci_swizzle_w(unsigned long port)
++{
++ if (__ath79_pci_swizzle_w)
++ return __ath79_pci_swizzle_w(port);
++
++ return port;
++}
++EXPORT_SYMBOL(ath79_pci_swizzle_w);
++
+ static inline u32 ar71xx_pci_get_ble(int where, int size, int local)
+ {
+ u32 t;
+@@ -279,6 +318,9 @@ static int ar71xx_pci_probe(struct platf
+
+ register_pci_controller(&apc->pci_ctrl);
+
++ __ath79_pci_swizzle_b = ar71xx_pci_swizzle_b;
++ __ath79_pci_swizzle_w = ar71xx_pci_swizzle_w;
++
+ return 0;
+ }
+
diff --git a/target/linux/ath79/patches-4.19/490-usb-ehci-add-quirks-for-qca-socs.patch b/target/linux/ath79/patches-4.19/490-usb-ehci-add-quirks-for-qca-socs.patch
new file mode 100644
index 00000000000..4e2a6fecee7
--- /dev/null
+++ b/target/linux/ath79/patches-4.19/490-usb-ehci-add-quirks-for-qca-socs.patch
@@ -0,0 +1,103 @@
+--- a/drivers/usb/host/ehci-hcd.c
++++ b/drivers/usb/host/ehci-hcd.c
+@@ -239,6 +239,37 @@ int ehci_reset(struct ehci_hcd *ehci)
+ command |= CMD_RESET;
+ dbg_cmd (ehci, "reset", command);
+ ehci_writel(ehci, command, &ehci->regs->command);
++
++ if (ehci->qca_force_host_mode) {
++ u32 usbmode;
++
++ udelay(1000);
++
++ usbmode = ehci_readl(ehci, &ehci->regs->usbmode);
++ usbmode |= USBMODE_CM_HC | (1 << 4);
++ ehci_writel(ehci, usbmode, &ehci->regs->usbmode);
++
++ ehci_dbg(ehci, "forced host mode, usbmode: %08x\n",
++ ehci_readl(ehci, &ehci->regs->usbmode));
++ }
++
++ if (ehci->qca_force_16bit_ptw) {
++ u32 port_status;
++
++ udelay(1000);
++
++ /* enable 16-bit UTMI interface */
++ port_status = ehci_readl(ehci, &ehci->regs->port_status[0]);
++ port_status |= BIT(28);
++ ehci_writel(ehci, port_status, &ehci->regs->port_status[0]);
++
++ ehci_dbg(ehci, "16-bit UTMI interface enabled, status: %08x\n",
++ ehci_readl(ehci, &ehci->regs->port_status[0]));
++ }
++
++ if (ehci->reset_notifier)
++ ehci->reset_notifier(ehci_to_hcd(ehci));
++
+ ehci->rh_state = EHCI_RH_HALTED;
+ ehci->next_statechange = jiffies;
+ retval = ehci_handshake(ehci, &ehci->regs->command,
+--- a/drivers/usb/host/ehci.h
++++ b/drivers/usb/host/ehci.h
+@@ -219,6 +219,10 @@ struct ehci_hcd { /* one per controlle
+ unsigned need_oc_pp_cycle:1; /* MPC834X port power */
+ unsigned imx28_write_fix:1; /* For Freescale i.MX28 */
+ unsigned ignore_oc:1;
++ unsigned qca_force_host_mode:1;
++ unsigned qca_force_16bit_ptw:1; /* force 16 bit UTMI */
++
++ void (*reset_notifier)(struct usb_hcd *hcd);
+
+ /* required for usb32 quirk */
+ #define OHCI_CTRL_HCFS (3 << 6)
+--- a/include/linux/usb/ehci_pdriver.h
++++ b/include/linux/usb/ehci_pdriver.h
+@@ -51,6 +51,8 @@ struct usb_ehci_pdata {
+ unsigned reset_on_resume:1;
+ unsigned dma_mask_64:1;
+ unsigned ignore_oc:1;
++ unsigned qca_force_host_mode:1;
++ unsigned qca_force_16bit_ptw:1;
+
+ /* Turn on all power and clocks */
+ int (*power_on)(struct platform_device *pdev);
+@@ -60,6 +62,7 @@ struct usb_ehci_pdata {
+ * turn off everything else */
+ void (*power_suspend)(struct platform_device *pdev);
+ int (*pre_setup)(struct usb_hcd *hcd);
++ void (*reset_notifier)(struct platform_device *pdev);
+ };
+
+ #endif /* __USB_CORE_EHCI_PDRIVER_H */
+--- a/drivers/usb/host/ehci-platform.c
++++ b/drivers/usb/host/ehci-platform.c
+@@ -48,6 +48,14 @@ struct ehci_platform_priv {
+
+ static const char hcd_name[] = "ehci-platform";
+
++static void ehci_platform_reset_notifier(struct usb_hcd *hcd)
++{
++ struct platform_device *pdev = to_platform_device(hcd->self.controller);
++ struct usb_ehci_pdata *pdata = pdev->dev.platform_data;
++
++ pdata->reset_notifier(pdev);
++}
++
+ static int ehci_platform_reset(struct usb_hcd *hcd)
+ {
+ struct platform_device *pdev = to_platform_device(hcd->self.controller);
+@@ -215,6 +223,13 @@ static int ehci_platform_probe(struct pl
+ priv->reset_on_resume = true;
+ if (pdata->ignore_oc)
+ ehci->ignore_oc = 1;
++ if (pdata->qca_force_host_mode)
++ ehci->qca_force_host_mode = 1;
++ if (pdata->qca_force_16bit_ptw)
++ ehci->qca_force_16bit_ptw = 1;
++
++ if (pdata->reset_notifier)
++ ehci->reset_notifier = ehci_platform_reset_notifier;
+
+ #ifndef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
+ if (ehci->big_endian_mmio) {
diff --git a/target/linux/ath79/patches-4.19/900-mdio_bitbang_ignore_ta_value.patch b/target/linux/ath79/patches-4.19/900-mdio_bitbang_ignore_ta_value.patch
new file mode 100644
index 00000000000..8f8f349a660
--- /dev/null
+++ b/target/linux/ath79/patches-4.19/900-mdio_bitbang_ignore_ta_value.patch
@@ -0,0 +1,32 @@
+--- a/drivers/net/phy/mdio-bitbang.c
++++ b/drivers/net/phy/mdio-bitbang.c
+@@ -155,7 +155,7 @@ static int mdiobb_cmd_addr(struct mdiobb
+ static int mdiobb_read(struct mii_bus *bus, int phy, int reg)
+ {
+ struct mdiobb_ctrl *ctrl = bus->priv;
+- int ret, i;
++ int ret;
+
+ if (reg & MII_ADDR_C45) {
+ reg = mdiobb_cmd_addr(ctrl, phy, reg);
+@@ -165,19 +165,7 @@ static int mdiobb_read(struct mii_bus *b
+
+ ctrl->ops->set_mdio_dir(ctrl, 0);
+
+- /* check the turnaround bit: the PHY should be driving it to zero, if this
+- * PHY is listed in phy_ignore_ta_mask as having broken TA, skip that
+- */
+- if (mdiobb_get_bit(ctrl) != 0 &&
+- !(bus->phy_ignore_ta_mask & (1 << phy))) {
+- /* PHY didn't drive TA low -- flush any bits it
+- * may be trying to send.
+- */
+- for (i = 0; i < 32; i++)
+- mdiobb_get_bit(ctrl);
+-
+- return 0xffff;
+- }
++ mdiobb_get_bit(ctrl);
+
+ ret = mdiobb_get_num(ctrl, 16);
+ mdiobb_get_bit(ctrl);
diff --git a/target/linux/ath79/patches-4.19/901-phy-mdio-bitbang-prevent-rescheduling-during-command.patch b/target/linux/ath79/patches-4.19/901-phy-mdio-bitbang-prevent-rescheduling-during-command.patch
new file mode 100644
index 00000000000..a830346a31e
--- /dev/null
+++ b/target/linux/ath79/patches-4.19/901-phy-mdio-bitbang-prevent-rescheduling-during-command.patch
@@ -0,0 +1,61 @@
+From 66e584435ac0de6e0abeb6d7166fe4fe25d6bb73 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Tue, 16 Jun 2015 13:15:08 +0200
+Subject: [PATCH] phy/mdio-bitbang: prevent rescheduling during command
+
+It seems some phys have some maximum timings for accessing the MDIO line,
+resulting in bit errors under cpu stress. Prevent this from happening by
+disabling interrupts when sending commands.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ drivers/net/phy/mdio-bitbang.c | 9 +++++++++
+ 1 file changed, 9 insertions(+)
+
+--- a/drivers/net/phy/mdio-bitbang.c
++++ b/drivers/net/phy/mdio-bitbang.c
+@@ -17,6 +17,7 @@
+ * kind, whether express or implied.
+ */
+
++#include <linux/irqflags.h>
+ #include <linux/module.h>
+ #include <linux/mdio-bitbang.h>
+ #include <linux/types.h>
+@@ -156,7 +157,9 @@ static int mdiobb_read(struct mii_bus *b
+ {
+ struct mdiobb_ctrl *ctrl = bus->priv;
+ int ret;
++ unsigned long flags;
+
++ local_irq_save(flags);
+ if (reg & MII_ADDR_C45) {
+ reg = mdiobb_cmd_addr(ctrl, phy, reg);
+ mdiobb_cmd(ctrl, MDIO_C45_READ, phy, reg);
+@@ -169,13 +172,17 @@ static int mdiobb_read(struct mii_bus *b
+
+ ret = mdiobb_get_num(ctrl, 16);
+ mdiobb_get_bit(ctrl);
++ local_irq_restore(flags);
++
+ return ret;
+ }
+
+ static int mdiobb_write(struct mii_bus *bus, int phy, int reg, u16 val)
+ {
+ struct mdiobb_ctrl *ctrl = bus->priv;
++ unsigned long flags;
+
++ local_irq_save(flags);
+ if (reg & MII_ADDR_C45) {
+ reg = mdiobb_cmd_addr(ctrl, phy, reg);
+ mdiobb_cmd(ctrl, MDIO_C45_WRITE, phy, reg);
+@@ -190,6 +197,8 @@ static int mdiobb_write(struct mii_bus *
+
+ ctrl->ops->set_mdio_dir(ctrl, 0);
+ mdiobb_get_bit(ctrl);
++ local_irq_restore(flags);
++
+ return 0;
+ }
+
diff --git a/target/linux/ath79/patches-4.19/910-unaligned_access_hacks.patch b/target/linux/ath79/patches-4.19/910-unaligned_access_hacks.patch
new file mode 100644
index 00000000000..dcc0e8b3c6a
--- /dev/null
+++ b/target/linux/ath79/patches-4.19/910-unaligned_access_hacks.patch
@@ -0,0 +1,891 @@
+--- a/arch/mips/include/asm/checksum.h
++++ b/arch/mips/include/asm/checksum.h
+@@ -134,26 +134,30 @@ static inline __sum16 ip_fast_csum(const
+ const unsigned int *stop = word + ihl;
+ unsigned int csum;
+ int carry;
++ unsigned int w;
+
+- csum = word[0];
+- csum += word[1];
+- carry = (csum < word[1]);
++ csum = net_hdr_word(word++);
++
++ w = net_hdr_word(word++);
++ csum += w;
++ carry = (csum < w);
+ csum += carry;
+
+- csum += word[2];
+- carry = (csum < word[2]);
++ w = net_hdr_word(word++);
++ csum += w;
++ carry = (csum < w);
+ csum += carry;
+
+- csum += word[3];
+- carry = (csum < word[3]);
++ w = net_hdr_word(word++);
++ csum += w;
++ carry = (csum < w);
+ csum += carry;
+
+- word += 4;
+ do {
+- csum += *word;
+- carry = (csum < *word);
++ w = net_hdr_word(word++);
++ csum += w;
++ carry = (csum < w);
+ csum += carry;
+- word++;
+ } while (word != stop);
+
+ return csum_fold(csum);
+@@ -214,73 +218,6 @@ static inline __sum16 ip_compute_csum(co
+ return csum_fold(csum_partial(buff, len, 0));
+ }
+
+-#define _HAVE_ARCH_IPV6_CSUM
+-static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
+- const struct in6_addr *daddr,
+- __u32 len, __u8 proto,
+- __wsum sum)
+-{
+- __wsum tmp;
+-
+- __asm__(
+- " .set push # csum_ipv6_magic\n"
+- " .set noreorder \n"
+- " .set noat \n"
+- " addu %0, %5 # proto (long in network byte order)\n"
+- " sltu $1, %0, %5 \n"
+- " addu %0, $1 \n"
+-
+- " addu %0, %6 # csum\n"
+- " sltu $1, %0, %6 \n"
+- " lw %1, 0(%2) # four words source address\n"
+- " addu %0, $1 \n"
+- " addu %0, %1 \n"
+- " sltu $1, %0, %1 \n"
+-
+- " lw %1, 4(%2) \n"
+- " addu %0, $1 \n"
+- " addu %0, %1 \n"
+- " sltu $1, %0, %1 \n"
+-
+- " lw %1, 8(%2) \n"
+- " addu %0, $1 \n"
+- " addu %0, %1 \n"
+- " sltu $1, %0, %1 \n"
+-
+- " lw %1, 12(%2) \n"
+- " addu %0, $1 \n"
+- " addu %0, %1 \n"
+- " sltu $1, %0, %1 \n"
+-
+- " lw %1, 0(%3) \n"
+- " addu %0, $1 \n"
+- " addu %0, %1 \n"
+- " sltu $1, %0, %1 \n"
+-
+- " lw %1, 4(%3) \n"
+- " addu %0, $1 \n"
+- " addu %0, %1 \n"
+- " sltu $1, %0, %1 \n"
+-
+- " lw %1, 8(%3) \n"
+- " addu %0, $1 \n"
+- " addu %0, %1 \n"
+- " sltu $1, %0, %1 \n"
+-
+- " lw %1, 12(%3) \n"
+- " addu %0, $1 \n"
+- " addu %0, %1 \n"
+- " sltu $1, %0, %1 \n"
+-
+- " addu %0, $1 # Add final carry\n"
+- " .set pop"
+- : "=&r" (sum), "=&r" (tmp)
+- : "r" (saddr), "r" (daddr),
+- "0" (htonl(len)), "r" (htonl(proto)), "r" (sum));
+-
+- return csum_fold(sum);
+-}
+-
+ #include <asm-generic/checksum.h>
+ #endif /* CONFIG_GENERIC_CSUM */
+
+--- a/include/uapi/linux/ip.h
++++ b/include/uapi/linux/ip.h
+@@ -103,7 +103,7 @@ struct iphdr {
+ __be32 saddr;
+ __be32 daddr;
+ /*The options start here. */
+-};
++} __attribute__((packed, aligned(2)));
+
+
+ struct ip_auth_hdr {
+--- a/include/uapi/linux/ipv6.h
++++ b/include/uapi/linux/ipv6.h
+@@ -131,7 +131,7 @@ struct ipv6hdr {
+
+ struct in6_addr saddr;
+ struct in6_addr daddr;
+-};
++} __attribute__((packed, aligned(2)));
+
+
+ /* index values for the variables in ipv6_devconf */
+--- a/include/uapi/linux/tcp.h
++++ b/include/uapi/linux/tcp.h
+@@ -55,7 +55,7 @@ struct tcphdr {
+ __be16 window;
+ __sum16 check;
+ __be16 urg_ptr;
+-};
++} __attribute__((packed, aligned(2)));
+
+ /*
+ * The union cast uses a gcc extension to avoid aliasing problems
+@@ -65,7 +65,7 @@ struct tcphdr {
+ union tcp_word_hdr {
+ struct tcphdr hdr;
+ __be32 words[5];
+-};
++} __attribute__((packed, aligned(2)));
+
+ #define tcp_flag_word(tp) ( ((union tcp_word_hdr *)(tp))->words [3])
+
+--- a/include/uapi/linux/udp.h
++++ b/include/uapi/linux/udp.h
+@@ -25,7 +25,7 @@ struct udphdr {
+ __be16 dest;
+ __be16 len;
+ __sum16 check;
+-};
++} __attribute__((packed, aligned(2)));
+
+ /* UDP socket options */
+ #define UDP_CORK 1 /* Never send partially complete segments */
+--- a/net/netfilter/nf_conntrack_core.c
++++ b/net/netfilter/nf_conntrack_core.c
+@@ -262,8 +262,8 @@ static bool ipv4_pkt_to_tuple(const stru
+
+ switch (l3num) {
+ case NFPROTO_IPV4:
+- tuple->src.u3.ip = ap[0];
+- tuple->dst.u3.ip = ap[1];
++ tuple->src.u3.ip = net_hdr_word(ap++);
++ tuple->dst.u3.ip = net_hdr_word(ap);
+ break;
+ case NFPROTO_IPV6:
+ memcpy(tuple->src.u3.ip6, ap, sizeof(tuple->src.u3.ip6));
+--- a/include/uapi/linux/icmp.h
++++ b/include/uapi/linux/icmp.h
+@@ -82,7 +82,7 @@ struct icmphdr {
+ } frag;
+ __u8 reserved[4];
+ } un;
+-};
++} __attribute__((packed, aligned(2)));
+
+
+ /*
+--- a/include/uapi/linux/in6.h
++++ b/include/uapi/linux/in6.h
+@@ -43,7 +43,7 @@ struct in6_addr {
+ #define s6_addr16 in6_u.u6_addr16
+ #define s6_addr32 in6_u.u6_addr32
+ #endif
+-};
++} __attribute__((packed, aligned(2)));
+ #endif /* __UAPI_DEF_IN6_ADDR */
+
+ #if __UAPI_DEF_SOCKADDR_IN6
+--- a/net/ipv6/tcp_ipv6.c
++++ b/net/ipv6/tcp_ipv6.c
+@@ -39,6 +39,7 @@
+ #include <linux/ipsec.h>
+ #include <linux/times.h>
+ #include <linux/slab.h>
++#include <asm/unaligned.h>
+ #include <linux/uaccess.h>
+ #include <linux/ipv6.h>
+ #include <linux/icmpv6.h>
+@@ -836,10 +837,10 @@ static void tcp_v6_send_response(const s
+ topt = (__be32 *)(t1 + 1);
+
+ if (tsecr) {
+- *topt++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
+- (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP);
+- *topt++ = htonl(tsval);
+- *topt++ = htonl(tsecr);
++ put_unaligned_be32((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
++ (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP, topt++);
++ put_unaligned_be32(tsval, topt++);
++ put_unaligned_be32(tsecr, topt++);
+ }
+
+ #ifdef CONFIG_TCP_MD5SIG
+--- a/include/linux/ipv6.h
++++ b/include/linux/ipv6.h
+@@ -6,6 +6,7 @@
+
+ #define ipv6_optlen(p) (((p)->hdrlen+1) << 3)
+ #define ipv6_authlen(p) (((p)->hdrlen+2) << 2)
++
+ /*
+ * This structure contains configuration options per IPv6 link.
+ */
+--- a/net/ipv6/datagram.c
++++ b/net/ipv6/datagram.c
+@@ -477,7 +477,7 @@ int ipv6_recv_error(struct sock *sk, str
+ ipv6_iface_scope_id(&sin->sin6_addr,
+ IP6CB(skb)->iif);
+ } else {
+- ipv6_addr_set_v4mapped(*(__be32 *)(nh + serr->addr_offset),
++ ipv6_addr_set_v4mapped(net_hdr_word(nh + serr->addr_offset),
+ &sin->sin6_addr);
+ sin->sin6_scope_id = 0;
+ }
+@@ -829,12 +829,12 @@ int ip6_datagram_send_ctl(struct net *ne
+ }
+
+ if (fl6->flowlabel&IPV6_FLOWINFO_MASK) {
+- if ((fl6->flowlabel^*(__be32 *)CMSG_DATA(cmsg))&~IPV6_FLOWINFO_MASK) {
++ if ((fl6->flowlabel^net_hdr_word(CMSG_DATA(cmsg)))&~IPV6_FLOWINFO_MASK) {
+ err = -EINVAL;
+ goto exit_f;
+ }
+ }
+- fl6->flowlabel = IPV6_FLOWINFO_MASK & *(__be32 *)CMSG_DATA(cmsg);
++ fl6->flowlabel = IPV6_FLOWINFO_MASK & net_hdr_word(CMSG_DATA(cmsg));
+ break;
+
+ case IPV6_2292HOPOPTS:
+--- a/net/ipv6/ip6_gre.c
++++ b/net/ipv6/ip6_gre.c
+@@ -452,7 +452,7 @@ static void ip6gre_err(struct sk_buff *s
+ return;
+ ipv6h = (const struct ipv6hdr *)skb->data;
+ greh = (const struct gre_base_hdr *)(skb->data + offset);
+- key = key_off ? *(__be32 *)(skb->data + key_off) : 0;
++ key = key_off ? net_hdr_word((__be32 *)(skb->data + key_off)) : 0;
+
+ t = ip6gre_tunnel_lookup(skb->dev, &ipv6h->daddr, &ipv6h->saddr,
+ key, greh->protocol);
+--- a/net/ipv6/exthdrs.c
++++ b/net/ipv6/exthdrs.c
+@@ -756,7 +756,7 @@ static bool ipv6_hop_jumbo(struct sk_buf
+ goto drop;
+ }
+
+- pkt_len = ntohl(*(__be32 *)(nh + optoff + 2));
++ pkt_len = ntohl(net_hdr_word(nh + optoff + 2));
+ if (pkt_len <= IPV6_MAXPLEN) {
+ __IP6_INC_STATS(net, idev, IPSTATS_MIB_INHDRERRORS);
+ icmpv6_param_prob(skb, ICMPV6_HDR_FIELD, optoff+2);
+--- a/include/linux/types.h
++++ b/include/linux/types.h
+@@ -230,5 +230,11 @@ struct callback_head {
+ typedef void (*rcu_callback_t)(struct rcu_head *head);
+ typedef void (*call_rcu_func_t)(struct rcu_head *head, rcu_callback_t func);
+
++struct net_hdr_word {
++ u32 words[1];
++} __attribute__((packed, aligned(2)));
++
++#define net_hdr_word(_p) (((struct net_hdr_word *) (_p))->words[0])
++
+ #endif /* __ASSEMBLY__ */
+ #endif /* _LINUX_TYPES_H */
+--- a/net/ipv4/af_inet.c
++++ b/net/ipv4/af_inet.c
+@@ -1422,8 +1422,8 @@ struct sk_buff **inet_gro_receive(struct
+ if (unlikely(ip_fast_csum((u8 *)iph, 5)))
+ goto out_unlock;
+
+- id = ntohl(*(__be32 *)&iph->id);
+- flush = (u16)((ntohl(*(__be32 *)iph) ^ skb_gro_len(skb)) | (id & ~IP_DF));
++ id = ntohl(net_hdr_word(&iph->id));
++ flush = (u16)((ntohl(net_hdr_word(iph)) ^ skb_gro_len(skb)) | (id & ~IP_DF));
+ id >>= 16;
+
+ list_for_each_entry(p, head, list) {
+--- a/net/ipv4/route.c
++++ b/net/ipv4/route.c
+@@ -448,7 +448,7 @@ static struct neighbour *ipv4_neigh_look
+ else if (skb)
+ pkey = &ip_hdr(skb)->daddr;
+
+- n = __ipv4_neigh_lookup(dev, *(__force u32 *)pkey);
++ n = __ipv4_neigh_lookup(dev, net_hdr_word(pkey));
+ if (n)
+ return n;
+ return neigh_create(&arp_tbl, pkey, dev);
+--- a/net/ipv4/tcp_output.c
++++ b/net/ipv4/tcp_output.c
+@@ -461,48 +461,53 @@ static void tcp_options_write(__be32 *pt
+ u16 options = opts->options; /* mungable copy */
+
+ if (unlikely(OPTION_MD5 & options)) {
+- *ptr++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
+- (TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG);
++ net_hdr_word(ptr++) =
++ htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
++ (TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG);
+ /* overload cookie hash location */
+ opts->hash_location = (__u8 *)ptr;
+ ptr += 4;
+ }
+
+ if (unlikely(opts->mss)) {
+- *ptr++ = htonl((TCPOPT_MSS << 24) |
+- (TCPOLEN_MSS << 16) |
+- opts->mss);
++ net_hdr_word(ptr++) =
++ htonl((TCPOPT_MSS << 24) | (TCPOLEN_MSS << 16) |
++ opts->mss);
+ }
+
+ if (likely(OPTION_TS & options)) {
+ if (unlikely(OPTION_SACK_ADVERTISE & options)) {
+- *ptr++ = htonl((TCPOPT_SACK_PERM << 24) |
+- (TCPOLEN_SACK_PERM << 16) |
+- (TCPOPT_TIMESTAMP << 8) |
+- TCPOLEN_TIMESTAMP);
++ net_hdr_word(ptr++) =
++ htonl((TCPOPT_SACK_PERM << 24) |
++ (TCPOLEN_SACK_PERM << 16) |
++ (TCPOPT_TIMESTAMP << 8) |
++ TCPOLEN_TIMESTAMP);
+ options &= ~OPTION_SACK_ADVERTISE;
+ } else {
+- *ptr++ = htonl((TCPOPT_NOP << 24) |
+- (TCPOPT_NOP << 16) |
+- (TCPOPT_TIMESTAMP << 8) |
+- TCPOLEN_TIMESTAMP);
++ net_hdr_word(ptr++) =
++ htonl((TCPOPT_NOP << 24) |
++ (TCPOPT_NOP << 16) |
++ (TCPOPT_TIMESTAMP << 8) |
++ TCPOLEN_TIMESTAMP);
+ }
+- *ptr++ = htonl(opts->tsval);
+- *ptr++ = htonl(opts->tsecr);
++ net_hdr_word(ptr++) = htonl(opts->tsval);
++ net_hdr_word(ptr++) = htonl(opts->tsecr);
+ }
+
+ if (unlikely(OPTION_SACK_ADVERTISE & options)) {
+- *ptr++ = htonl((TCPOPT_NOP << 24) |
+- (TCPOPT_NOP << 16) |
+- (TCPOPT_SACK_PERM << 8) |
+- TCPOLEN_SACK_PERM);
++ net_hdr_word(ptr++) =
++ htonl((TCPOPT_NOP << 24) |
++ (TCPOPT_NOP << 16) |
++ (TCPOPT_SACK_PERM << 8) |
++ TCPOLEN_SACK_PERM);
+ }
+
+ if (unlikely(OPTION_WSCALE & options)) {
+- *ptr++ = htonl((TCPOPT_NOP << 24) |
+- (TCPOPT_WINDOW << 16) |
+- (TCPOLEN_WINDOW << 8) |
+- opts->ws);
++ net_hdr_word(ptr++) =
++ htonl((TCPOPT_NOP << 24) |
++ (TCPOPT_WINDOW << 16) |
++ (TCPOLEN_WINDOW << 8) |
++ opts->ws);
+ }
+
+ if (unlikely(opts->num_sack_blocks)) {
+@@ -510,16 +515,17 @@ static void tcp_options_write(__be32 *pt
+ tp->duplicate_sack : tp->selective_acks;
+ int this_sack;
+
+- *ptr++ = htonl((TCPOPT_NOP << 24) |
+- (TCPOPT_NOP << 16) |
+- (TCPOPT_SACK << 8) |
+- (TCPOLEN_SACK_BASE + (opts->num_sack_blocks *
++ net_hdr_word(ptr++) =
++ htonl((TCPOPT_NOP << 24) |
++ (TCPOPT_NOP << 16) |
++ (TCPOPT_SACK << 8) |
++ (TCPOLEN_SACK_BASE + (opts->num_sack_blocks *
+ TCPOLEN_SACK_PERBLOCK)));
+
+ for (this_sack = 0; this_sack < opts->num_sack_blocks;
+ ++this_sack) {
+- *ptr++ = htonl(sp[this_sack].start_seq);
+- *ptr++ = htonl(sp[this_sack].end_seq);
++ net_hdr_word(ptr++) = htonl(sp[this_sack].start_seq);
++ net_hdr_word(ptr++) = htonl(sp[this_sack].end_seq);
+ }
+
+ tp->rx_opt.dsack = 0;
+@@ -532,13 +538,14 @@ static void tcp_options_write(__be32 *pt
+
+ if (foc->exp) {
+ len = TCPOLEN_EXP_FASTOPEN_BASE + foc->len;
+- *ptr = htonl((TCPOPT_EXP << 24) | (len << 16) |
++ net_hdr_word(ptr) =
++ htonl((TCPOPT_EXP << 24) | (len << 16) |
+ TCPOPT_FASTOPEN_MAGIC);
+ p += TCPOLEN_EXP_FASTOPEN_BASE;
+ } else {
+ len = TCPOLEN_FASTOPEN_BASE + foc->len;
+- *p++ = TCPOPT_FASTOPEN;
+- *p++ = len;
++ net_hdr_word(p++) = TCPOPT_FASTOPEN;
++ net_hdr_word(p++) = len;
+ }
+
+ memcpy(p, foc->val, foc->len);
+--- a/include/uapi/linux/igmp.h
++++ b/include/uapi/linux/igmp.h
+@@ -33,7 +33,7 @@ struct igmphdr {
+ __u8 code; /* For newer IGMP */
+ __sum16 csum;
+ __be32 group;
+-};
++} __attribute__((packed, aligned(2)));
+
+ /* V3 group record types [grec_type] */
+ #define IGMPV3_MODE_IS_INCLUDE 1
+@@ -49,7 +49,7 @@ struct igmpv3_grec {
+ __be16 grec_nsrcs;
+ __be32 grec_mca;
+ __be32 grec_src[0];
+-};
++} __attribute__((packed, aligned(2)));
+
+ struct igmpv3_report {
+ __u8 type;
+@@ -58,7 +58,7 @@ struct igmpv3_report {
+ __be16 resv2;
+ __be16 ngrec;
+ struct igmpv3_grec grec[0];
+-};
++} __attribute__((packed, aligned(2)));
+
+ struct igmpv3_query {
+ __u8 type;
+@@ -79,7 +79,7 @@ struct igmpv3_query {
+ __u8 qqic;
+ __be16 nsrcs;
+ __be32 srcs[0];
+-};
++} __attribute__((packed, aligned(2)));
+
+ #define IGMP_HOST_MEMBERSHIP_QUERY 0x11 /* From RFC1112 */
+ #define IGMP_HOST_MEMBERSHIP_REPORT 0x12 /* Ditto */
+--- a/net/core/flow_dissector.c
++++ b/net/core/flow_dissector.c
+@@ -111,7 +111,7 @@ __be32 __skb_flow_get_ports(const struct
+ ports = __skb_header_pointer(skb, thoff + poff,
+ sizeof(_ports), data, hlen, &_ports);
+ if (ports)
+- return *ports;
++ return (__be32)net_hdr_word(ports);
+ }
+
+ return 0;
+--- a/include/uapi/linux/icmpv6.h
++++ b/include/uapi/linux/icmpv6.h
+@@ -77,7 +77,7 @@ struct icmp6hdr {
+ #define icmp6_addrconf_other icmp6_dataun.u_nd_ra.other
+ #define icmp6_rt_lifetime icmp6_dataun.u_nd_ra.rt_lifetime
+ #define icmp6_router_pref icmp6_dataun.u_nd_ra.router_pref
+-};
++} __attribute__((packed, aligned(2)));
+
+
+ #define ICMPV6_ROUTER_PREF_LOW 0x3
+--- a/include/net/ndisc.h
++++ b/include/net/ndisc.h
+@@ -89,7 +89,7 @@ struct ra_msg {
+ struct icmp6hdr icmph;
+ __be32 reachable_time;
+ __be32 retrans_timer;
+-};
++} __attribute__((packed, aligned(2)));
+
+ struct rd_msg {
+ struct icmp6hdr icmph;
+@@ -368,10 +368,10 @@ static inline u32 ndisc_hashfn(const voi
+ {
+ const u32 *p32 = pkey;
+
+- return (((p32[0] ^ hash32_ptr(dev)) * hash_rnd[0]) +
+- (p32[1] * hash_rnd[1]) +
+- (p32[2] * hash_rnd[2]) +
+- (p32[3] * hash_rnd[3]));
++ return (((net_hdr_word(&p32[0]) ^ hash32_ptr(dev)) * hash_rnd[0]) +
++ (net_hdr_word(&p32[1]) * hash_rnd[1]) +
++ (net_hdr_word(&p32[2]) * hash_rnd[2]) +
++ (net_hdr_word(&p32[3]) * hash_rnd[3]));
+ }
+
+ static inline struct neighbour *__ipv6_neigh_lookup_noref(struct net_device *dev, const void *pkey)
+--- a/net/sched/cls_u32.c
++++ b/net/sched/cls_u32.c
+@@ -165,7 +165,7 @@ next_knode:
+ data = skb_header_pointer(skb, toff, 4, &hdata);
+ if (!data)
+ goto out;
+- if ((*data ^ key->val) & key->mask) {
++ if ((net_hdr_word(data) ^ key->val) & key->mask) {
+ n = rcu_dereference_bh(n->next);
+ goto next_knode;
+ }
+@@ -218,8 +218,8 @@ check_terminal:
+ &hdata);
+ if (!data)
+ goto out;
+- sel = ht->divisor & u32_hash_fold(*data, &n->sel,
+- n->fshift);
++ sel = ht->divisor & u32_hash_fold(net_hdr_word(data),
++ &n->sel, n->fshift);
+ }
+ if (!(n->sel.flags & (TC_U32_VAROFFSET | TC_U32_OFFSET | TC_U32_EAT)))
+ goto next_ht;
+--- a/net/ipv6/ip6_offload.c
++++ b/net/ipv6/ip6_offload.c
+@@ -223,7 +223,7 @@ static struct sk_buff **ipv6_gro_receive
+ continue;
+
+ iph2 = (struct ipv6hdr *)(p->data + off);
+- first_word = *(__be32 *)iph ^ *(__be32 *)iph2;
++ first_word = net_hdr_word(iph) ^ net_hdr_word(iph2);
+
+ /* All fields must match except length and Traffic Class.
+ * XXX skbs on the gro_list have all been parsed and pulled
+--- a/include/net/addrconf.h
++++ b/include/net/addrconf.h
+@@ -47,7 +47,7 @@ struct prefix_info {
+ __be32 reserved2;
+
+ struct in6_addr prefix;
+-};
++} __attribute__((packed, aligned(2)));
+
+ #include <linux/netdevice.h>
+ #include <net/if_inet6.h>
+--- a/include/net/inet_ecn.h
++++ b/include/net/inet_ecn.h
+@@ -125,9 +125,9 @@ static inline int IP6_ECN_set_ce(struct
+ if (INET_ECN_is_not_ect(ipv6_get_dsfield(iph)))
+ return 0;
+
+- from = *(__be32 *)iph;
++ from = net_hdr_word(iph);
+ to = from | htonl(INET_ECN_CE << 20);
+- *(__be32 *)iph = to;
++ net_hdr_word(iph) = to;
+ if (skb->ip_summed == CHECKSUM_COMPLETE)
+ skb->csum = csum_add(csum_sub(skb->csum, (__force __wsum)from),
+ (__force __wsum)to);
+--- a/include/net/ipv6.h
++++ b/include/net/ipv6.h
+@@ -149,7 +149,7 @@ struct frag_hdr {
+ __u8 reserved;
+ __be16 frag_off;
+ __be32 identification;
+-};
++} __attribute__((packed, aligned(2)));
+
+ #define IP6_MF 0x0001
+ #define IP6_OFFSET 0xFFF8
+@@ -499,8 +499,8 @@ static inline void __ipv6_addr_set_half(
+ }
+ #endif
+ #endif
+- addr[0] = wh;
+- addr[1] = wl;
++ net_hdr_word(&addr[0]) = wh;
++ net_hdr_word(&addr[1]) = wl;
+ }
+
+ static inline void ipv6_addr_set(struct in6_addr *addr,
+@@ -559,6 +559,8 @@ static inline bool ipv6_prefix_equal(con
+ const __be32 *a1 = addr1->s6_addr32;
+ const __be32 *a2 = addr2->s6_addr32;
+ unsigned int pdw, pbi;
++ /* Used for last <32-bit fraction of prefix */
++ u32 pbia1, pbia2;
+
+ /* check complete u32 in prefix */
+ pdw = prefixlen >> 5;
+@@ -567,7 +569,9 @@ static inline bool ipv6_prefix_equal(con
+
+ /* check incomplete u32 in prefix */
+ pbi = prefixlen & 0x1f;
+- if (pbi && ((a1[pdw] ^ a2[pdw]) & htonl((0xffffffff) << (32 - pbi))))
++ pbia1 = net_hdr_word(&a1[pdw]);
++ pbia2 = net_hdr_word(&a2[pdw]);
++ if (pbi && ((pbia1 ^ pbia2) & htonl((0xffffffff) << (32 - pbi))))
+ return false;
+
+ return true;
+@@ -683,13 +687,13 @@ static inline void ipv6_addr_set_v4mappe
+ */
+ static inline int __ipv6_addr_diff32(const void *token1, const void *token2, int addrlen)
+ {
+- const __be32 *a1 = token1, *a2 = token2;
++ const struct in6_addr *a1 = token1, *a2 = token2;
+ int i;
+
+ addrlen >>= 2;
+
+ for (i = 0; i < addrlen; i++) {
+- __be32 xb = a1[i] ^ a2[i];
++ __be32 xb = a1->s6_addr32[i] ^ a2->s6_addr32[i];
+ if (xb)
+ return i * 32 + 31 - __fls(ntohl(xb));
+ }
+@@ -876,17 +880,18 @@ static inline int ip6_default_np_autolab
+ static inline void ip6_flow_hdr(struct ipv6hdr *hdr, unsigned int tclass,
+ __be32 flowlabel)
+ {
+- *(__be32 *)hdr = htonl(0x60000000 | (tclass << 20)) | flowlabel;
++ net_hdr_word((__be32 *)hdr) =
++ htonl(0x60000000 | (tclass << 20)) | flowlabel;
+ }
+
+ static inline __be32 ip6_flowinfo(const struct ipv6hdr *hdr)
+ {
+- return *(__be32 *)hdr & IPV6_FLOWINFO_MASK;
++ return net_hdr_word((__be32 *)hdr) & IPV6_FLOWINFO_MASK;
+ }
+
+ static inline __be32 ip6_flowlabel(const struct ipv6hdr *hdr)
+ {
+- return *(__be32 *)hdr & IPV6_FLOWLABEL_MASK;
++ return net_hdr_word((__be32 *)hdr) & IPV6_FLOWLABEL_MASK;
+ }
+
+ static inline u8 ip6_tclass(__be32 flowinfo)
+--- a/include/net/secure_seq.h
++++ b/include/net/secure_seq.h
+@@ -3,6 +3,7 @@
+ #define _NET_SECURE_SEQ
+
+ #include <linux/types.h>
++#include <linux/in6.h>
+
+ u32 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport);
+ u32 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr,
+--- a/include/uapi/linux/in.h
++++ b/include/uapi/linux/in.h
+@@ -84,7 +84,7 @@ enum {
+ /* Internet address. */
+ struct in_addr {
+ __be32 s_addr;
+-};
++} __attribute__((packed, aligned(2)));
+ #endif
+
+ #define IP_TOS 1
+--- a/net/ipv6/ip6_fib.c
++++ b/net/ipv6/ip6_fib.c
+@@ -142,7 +142,7 @@ static __be32 addr_bit_set(const void *t
+ * See include/asm-generic/bitops/le.h.
+ */
+ return (__force __be32)(1 << ((~fn_bit ^ BITOP_BE32_SWIZZLE) & 0x1f)) &
+- addr[fn_bit >> 5];
++ net_hdr_word(&addr[fn_bit >> 5]);
+ }
+
+ struct fib6_info *fib6_info_alloc(gfp_t gfp_flags)
+--- a/net/netfilter/nf_conntrack_proto_tcp.c
++++ b/net/netfilter/nf_conntrack_proto_tcp.c
+@@ -423,7 +423,7 @@ static void tcp_sack(const struct sk_buf
+
+ /* Fast path for timestamp-only option */
+ if (length == TCPOLEN_TSTAMP_ALIGNED
+- && *(__be32 *)ptr == htonl((TCPOPT_NOP << 24)
++ && net_hdr_word(ptr) == htonl((TCPOPT_NOP << 24)
+ | (TCPOPT_NOP << 16)
+ | (TCPOPT_TIMESTAMP << 8)
+ | TCPOLEN_TIMESTAMP))
+--- a/net/xfrm/xfrm_input.c
++++ b/net/xfrm/xfrm_input.c
+@@ -194,8 +194,8 @@ int xfrm_parse_spi(struct sk_buff *skb,
+ if (!pskb_may_pull(skb, hlen))
+ return -EINVAL;
+
+- *spi = *(__be32 *)(skb_transport_header(skb) + offset);
+- *seq = *(__be32 *)(skb_transport_header(skb) + offset_seq);
++ *spi = net_hdr_word(skb_transport_header(skb) + offset);
++ *seq = net_hdr_word(skb_transport_header(skb) + offset_seq);
+ return 0;
+ }
+ EXPORT_SYMBOL(xfrm_parse_spi);
+--- a/net/ipv4/tcp_input.c
++++ b/net/ipv4/tcp_input.c
+@@ -3898,14 +3898,16 @@ static bool tcp_parse_aligned_timestamp(
+ {
+ const __be32 *ptr = (const __be32 *)(th + 1);
+
+- if (*ptr == htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16)
+- | (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) {
++ if (net_hdr_word(ptr) ==
++ htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
++ (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) {
+ tp->rx_opt.saw_tstamp = 1;
+ ++ptr;
+- tp->rx_opt.rcv_tsval = ntohl(*ptr);
++ tp->rx_opt.rcv_tsval = get_unaligned_be32(ptr);
+ ++ptr;
+- if (*ptr)
+- tp->rx_opt.rcv_tsecr = ntohl(*ptr) - tp->tsoffset;
++ if (net_hdr_word(ptr))
++ tp->rx_opt.rcv_tsecr = get_unaligned_be32(ptr) -
++ tp->tsoffset;
+ else
+ tp->rx_opt.rcv_tsecr = 0;
+ return true;
+--- a/include/uapi/linux/if_pppox.h
++++ b/include/uapi/linux/if_pppox.h
+@@ -51,6 +51,7 @@ struct pppoe_addr {
+ */
+ struct pptp_addr {
+ __u16 call_id;
++ __u16 pad;
+ struct in_addr sin_addr;
+ };
+
+--- a/net/ipv6/netfilter/nf_log_ipv6.c
++++ b/net/ipv6/netfilter/nf_log_ipv6.c
+@@ -66,9 +66,9 @@ static void dump_ipv6_packet(struct nf_l
+ /* Max length: 44 "LEN=65535 TC=255 HOPLIMIT=255 FLOWLBL=FFFFF " */
+ nf_log_buf_add(m, "LEN=%zu TC=%u HOPLIMIT=%u FLOWLBL=%u ",
+ ntohs(ih->payload_len) + sizeof(struct ipv6hdr),
+- (ntohl(*(__be32 *)ih) & 0x0ff00000) >> 20,
++ (ntohl(net_hdr_word(ih)) & 0x0ff00000) >> 20,
+ ih->hop_limit,
+- (ntohl(*(__be32 *)ih) & 0x000fffff));
++ (ntohl(net_hdr_word(ih)) & 0x000fffff));
+
+ fragment = 0;
+ ptr = ip6hoff + sizeof(struct ipv6hdr);
+--- a/include/net/neighbour.h
++++ b/include/net/neighbour.h
+@@ -266,8 +266,10 @@ static inline bool neigh_key_eq128(const
+ const u32 *n32 = (const u32 *)n->primary_key;
+ const u32 *p32 = pkey;
+
+- return ((n32[0] ^ p32[0]) | (n32[1] ^ p32[1]) |
+- (n32[2] ^ p32[2]) | (n32[3] ^ p32[3])) == 0;
++ return ((n32[0] ^ net_hdr_word(&p32[0])) |
++ (n32[1] ^ net_hdr_word(&p32[1])) |
++ (n32[2] ^ net_hdr_word(&p32[2])) |
++ (n32[3] ^ net_hdr_word(&p32[3]))) == 0;
+ }
+
+ static inline struct neighbour *___neigh_lookup_noref(
+--- a/include/uapi/linux/netfilter_arp/arp_tables.h
++++ b/include/uapi/linux/netfilter_arp/arp_tables.h
+@@ -70,7 +70,7 @@ struct arpt_arp {
+ __u8 flags;
+ /* Inverse flags */
+ __u16 invflags;
+-};
++} __attribute__((aligned(4)));
+
+ /* Values for "flag" field in struct arpt_ip (general arp structure).
+ * No flags defined yet.
+--- a/net/core/utils.c
++++ b/net/core/utils.c
+@@ -447,8 +447,14 @@ void inet_proto_csum_replace16(__sum16 *
+ bool pseudohdr)
+ {
+ __be32 diff[] = {
+- ~from[0], ~from[1], ~from[2], ~from[3],
+- to[0], to[1], to[2], to[3],
++ ~net_hdr_word(&from[0]),
++ ~net_hdr_word(&from[1]),
++ ~net_hdr_word(&from[2]),
++ ~net_hdr_word(&from[3]),
++ net_hdr_word(&to[0]),
++ net_hdr_word(&to[1]),
++ net_hdr_word(&to[2]),
++ net_hdr_word(&to[3]),
+ };
+ if (skb->ip_summed != CHECKSUM_PARTIAL) {
+ *sum = csum_fold(csum_partial(diff, sizeof(diff),
+--- a/include/linux/etherdevice.h
++++ b/include/linux/etherdevice.h
+@@ -480,7 +480,7 @@ static inline bool is_etherdev_addr(cons
+ * @b: Pointer to Ethernet header
+ *
+ * Compare two Ethernet headers, returns 0 if equal.
+- * This assumes that the network header (i.e., IP header) is 4-byte
++ * This assumes that the network header (i.e., IP header) is 2-byte
+ * aligned OR the platform can handle unaligned access. This is the
+ * case for all packets coming into netif_receive_skb or similar
+ * entry points.
+@@ -503,11 +503,12 @@ static inline unsigned long compare_ethe
+ fold |= *(unsigned long *)(a + 6) ^ *(unsigned long *)(b + 6);
+ return fold;
+ #else
+- u32 *a32 = (u32 *)((u8 *)a + 2);
+- u32 *b32 = (u32 *)((u8 *)b + 2);
++ const u16 *a16 = a;
++ const u16 *b16 = b;
+
+- return (*(u16 *)a ^ *(u16 *)b) | (a32[0] ^ b32[0]) |
+- (a32[1] ^ b32[1]) | (a32[2] ^ b32[2]);
++ return (a16[0] ^ b16[0]) | (a16[1] ^ b16[1]) | (a16[2] ^ b16[2]) |
++ (a16[3] ^ b16[3]) | (a16[4] ^ b16[4]) | (a16[5] ^ b16[5]) |
++ (a16[6] ^ b16[6]);
+ #endif
+ }
+
+--- a/net/ipv4/tcp_offload.c
++++ b/net/ipv4/tcp_offload.c
+@@ -226,7 +226,7 @@ struct sk_buff **tcp_gro_receive(struct
+
+ th2 = tcp_hdr(p);
+
+- if (*(u32 *)&th->source ^ *(u32 *)&th2->source) {
++ if (net_hdr_word(&th->source) ^ net_hdr_word(&th2->source)) {
+ NAPI_GRO_CB(p)->same_flow = 0;
+ continue;
+ }
+@@ -244,8 +244,8 @@ found:
+ ~(TCP_FLAG_CWR | TCP_FLAG_FIN | TCP_FLAG_PSH));
+ flush |= (__force int)(th->ack_seq ^ th2->ack_seq);
+ for (i = sizeof(*th); i < thlen; i += 4)
+- flush |= *(u32 *)((u8 *)th + i) ^
+- *(u32 *)((u8 *)th2 + i);
++ flush |= net_hdr_word((u8 *)th + i) ^
++ net_hdr_word((u8 *)th2 + i);
+
+ /* When we receive our second frame we can made a decision on if we
+ * continue this flow as an atomic flow with a fixed ID or if we use
+--- a/net/ipv6/netfilter/ip6table_mangle.c
++++ b/net/ipv6/netfilter/ip6table_mangle.c
+@@ -50,7 +50,7 @@ ip6t_mangle_out(struct sk_buff *skb, con
+ hop_limit = ipv6_hdr(skb)->hop_limit;
+
+ /* flowlabel and prio (includes version, which shouldn't change either */
+- flowlabel = *((u_int32_t *)ipv6_hdr(skb));
++ flowlabel = net_hdr_word(ipv6_hdr(skb));
+
+ ret = ip6t_do_table(skb, state, state->net->ipv6.ip6table_mangle);
+
+@@ -59,7 +59,7 @@ ip6t_mangle_out(struct sk_buff *skb, con
+ !ipv6_addr_equal(&ipv6_hdr(skb)->daddr, &daddr) ||
+ skb->mark != mark ||
+ ipv6_hdr(skb)->hop_limit != hop_limit ||
+- flowlabel != *((u_int32_t *)ipv6_hdr(skb)))) {
++ flowlabel != net_hdr_word(ipv6_hdr(skb)))) {
+ err = ip6_route_me_harder(state->net, skb);
+ if (err < 0)
+ ret = NF_DROP_ERR(err);
--
GitLab