From bce555b09b532137c447944b897f0f709560c6b1 Mon Sep 17 00:00:00 2001
From: Kevin Schmidt <kevin.patrick.schmidt@googlemail.com>
Date: Fri, 2 Nov 2018 23:50:25 +0100
Subject: [PATCH] lantiq: enable FXS ports on VR200v
Disables SMP support.
Add VR200 target to keep SMP on FXS-less device variant.
Signed-off-by: Kevin Schmidt <kevin.patrick.schmidt@googlemail.com>
---
.../lantiq/base-files/etc/board.d/02_network | 2 +-
.../files-4.14/arch/mips/boot/dts/VR200.dts | 94 +++++++
.../files-4.14/arch/mips/boot/dts/VR200.dtsi | 219 +++++++++++++++++
.../files-4.14/arch/mips/boot/dts/VR200v.dts | 230 +-----------------
target/linux/lantiq/image/tp-link.mk | 16 +-
5 files changed, 341 insertions(+), 220 deletions(-)
create mode 100644 target/linux/lantiq/files-4.14/arch/mips/boot/dts/VR200.dts
create mode 100644 target/linux/lantiq/files-4.14/arch/mips/boot/dts/VR200.dtsi
diff --git a/target/linux/lantiq/base-files/etc/board.d/02_network b/target/linux/lantiq/base-files/etc/board.d/02_network
index 7817bdd00eb..86894403d7c 100755
--- a/target/linux/lantiq/base-files/etc/board.d/02_network
+++ b/target/linux/lantiq/base-files/etc/board.d/02_network
@@ -195,7 +195,7 @@ arcadyan,vg3503j)
"2:lan:2" "4:lan:1" "6t@eth0"
;;
-tplink,vr200v)
+tplink,vr200|tplink,vr200v)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary romfile 61696)" 1)
ucidef_add_switch "switch0" \
"0:lan" "2:lan" "4:lan" "5:lan" "6t@eth0"
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VR200.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VR200.dts
new file mode 100644
index 00000000000..74f666ddfd8
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VR200.dts
@@ -0,0 +1,94 @@
+/dts-v1/;
+
+#include "VR200.dtsi"
+
+/ {
+ compatible = "tplink,vr200", "lantiq,xway", "lantiq,vr9";
+ model = "TP-LINK Archer VR200";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ aliases {
+ led-boot = &power;
+ led-failsafe = &power;
+ led-running = &power;
+ led-upgrade = &power;
+
+ led-dsl = &dsl;
+ led-internet = &internet;
+ led-wifi = &wlan5g;
+
+ led-usb = &led_usb;
+ led-usb2 = &led_usb;
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <100>;
+ reset {
+ label = "reset";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wifi {
+ label = "wifi";
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_RFKILL>;
+ linux,input-type = <EV_SW>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ led {
+ label = "led";
+ gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_LIGHTS_TOGGLE>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ power: power {
+ label = "vr200:blue:power";
+ gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+ dsl: dsl {
+ label = "vr200:blue:dsl";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+ internet: internet {
+ label = "vr200:blue:internet";
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ };
+ led_usb: usb {
+ label = "vr200:blue:usb";
+ gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
+ };
+ eth {
+ label = "vr200:blue:lan";
+ gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
+ };
+ wlan {
+ label = "vr200:blue:wlan";
+ gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
+ };
+ wlan5g: wifi {
+ label = "vr200:blue:wlan5g";
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ };
+ led_wps {
+ label = "vr200:blue:wps";
+ gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VR200.dtsi b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VR200.dtsi
new file mode 100644
index 00000000000..dcfa86125de
--- /dev/null
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VR200.dtsi
@@ -0,0 +1,219 @@
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+/ {
+ memory@0 {
+ reg = <0x0 0x7f00000>;
+ };
+
+ usb_vbus: regulator-usb-vbus {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB_VBUS";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+ð0 {
+ lan: interface@0 {
+ compatible = "lantiq,xrx200-pdi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ mtd-mac-address = <&romfile 0xf100>;
+ lantiq,switch;
+
+ ethernet@0 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <0>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+ // gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
+ };
+ ethernet@5 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <5>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy5>;
+ };
+ ethernet@2 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <2>;
+ phy-mode = "gmii";
+ phy-handle = <&phy11>;
+ };
+ ethernet@3 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <4>;
+ phy-mode = "gmii";
+ phy-handle = <&phy13>;
+ };
+ };
+
+ mdio@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "lantiq,xrx200-mdio";
+ reg = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy5: ethernet-phy@5 {
+ reg = <0x5>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy13: ethernet-phy@13 {
+ reg = <0x13>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ };
+};
+
+&gphy0 {
+ lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gphy1 {
+ lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ mdio {
+ lantiq,groups = "mdio";
+ lantiq,function = "mdio";
+ };
+ gphy-leds {
+ lantiq,groups = "gphy0 led1", "gphy1 led1";
+ lantiq,function = "gphy";
+ lantiq,pull = <2>;
+ lantiq,open-drain = <0>;
+ lantiq,output = <1>;
+ };
+ phy-rst {
+ lantiq,pins = "io42";
+ lantiq,pull = <0>;
+ lantiq,open-drain = <0>;
+ lantiq,output = <1>;
+ };
+ pcie-rst {
+ lantiq,pins = "io38";
+ lantiq,pull = <0>;
+ lantiq,output = <1>;
+ };
+ };
+ pins_spi_default: pins_spi_default {
+ spi_in {
+ lantiq,groups = "spi_di";
+ lantiq,function = "spi";
+ };
+ spi_out {
+ lantiq,groups = "spi_do", "spi_clk",
+ "spi_cs4";
+ lantiq,function = "spi";
+ lantiq,output = <1>;
+ };
+ };
+};
+
+&pci0 {
+ status = "okay";
+ gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+};
+
+&spi {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_spi_default>;
+
+ m25p80@4 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <4 0>;
+ spi-max-frequency = <33250000>;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x0 0x20000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ partition@20000 {
+ reg = <0x20000 0xf90000>;
+ label = "firmware";
+ };
+
+ partition@fb0000 {
+ reg = <0xfb0000 0x10000>;
+ label = "radioDECT";
+ read-only;
+ };
+
+ partition@fc0000 {
+ reg = <0xfc0000 0x10000>;
+ label = "config";
+ read-only;
+ };
+
+ romfile: partition@fd0000 {
+ reg = <0xfd0000 0x10000>;
+ label = "romfile";
+ read-only;
+ };
+
+ partition@fe0000 {
+ reg = <0xfe0000 0x10000>;
+ label = "rom";
+ read-only;
+ };
+
+ partition@ff0000 {
+ reg = <0xff0000 0x10000>;
+ label = "radio";
+ read-only;
+ };
+ };
+ };
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb_phy1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ vbus-supply = <&usb_vbus>;
+};
+
+&usb1 {
+ status = "okay";
+ vbus-supply = <&usb_vbus>;
+};
diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VR200v.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VR200v.dts
index 331f08ed501..dc65dbfc361 100644
--- a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VR200v.dts
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VR200v.dts
@@ -1,32 +1,29 @@
/dts-v1/;
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+#include "VR200.dtsi"
/ {
compatible = "tplink,vr200v", "lantiq,xway", "lantiq,vr9";
model = "TP-LINK Archer VR200v";
chosen {
- bootargs = "console=ttyLTQ0,115200";
+ bootargs = "console=ttyLTQ0,115200 mem=126M vpe1_load_addr=0x87e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp";
};
aliases {
led-boot = &power;
led-failsafe = &power;
+ led-running = &power;
+ led-upgrade = &power;
led-dsl = &dsl;
led-internet = &internet;
+ led-wifi = &wlan5g;
+
led-usb = &led_usb;
led-usb2 = &led_usb;
};
- memory@0 {
- reg = <0x0 0x7f00000>;
- };
-
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
@@ -63,6 +60,7 @@
power: power {
label = "vr200v:blue:power";
gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
};
dsl: dsl {
label = "vr200v:blue:dsl";
@@ -84,7 +82,7 @@
label = "vr200v:blue:wlan";
gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
};
- wlan5g {
+ wlan5g: wifi {
label = "vr200v:blue:wlan5g";
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
};
@@ -92,214 +90,12 @@
label = "vr200v:blue:phone";
gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
};
- };
-
- usb_vbus: regulator-usb-vbus {
- compatible = "regulator-fixed";
-
- regulator-name = "USB_VBUS";
-
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-};
-
-ð0 {
- lan: interface@0 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- mtd-mac-address = <&romfile 0xf100>;
- lantiq,switch;
-
- ethernet@0 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <0>;
- phy-mode = "rgmii";
- phy-handle = <&phy0>;
- // gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
- };
- ethernet@5 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <5>;
- phy-mode = "rgmii";
- phy-handle = <&phy5>;
- };
- ethernet@2 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <2>;
- phy-mode = "gmii";
- phy-handle = <&phy11>;
- };
- ethernet@3 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <4>;
- phy-mode = "gmii";
- phy-handle = <&phy13>;
- };
- };
-
- mdio@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-mdio";
- reg = <0>;
-
- phy0: ethernet-phy@0 {
- reg = <0x0>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy5: ethernet-phy@5 {
- reg = <0x5>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy11: ethernet-phy@11 {
- reg = <0x11>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy13: ethernet-phy@13 {
- reg = <0x13>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- };
-};
-
-&gphy0 {
- lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gphy1 {
- lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gpio {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- mdio {
- lantiq,groups = "mdio";
- lantiq,function = "mdio";
- };
- gphy-leds {
- lantiq,groups = "gphy0 led1", "gphy1 led1";
- lantiq,function = "gphy";
- lantiq,pull = <2>;
- lantiq,open-drain = <0>;
- lantiq,output = <1>;
- };
- phy-rst {
- lantiq,pins = "io42";
- lantiq,pull = <0>;
- lantiq,open-drain = <0>;
- lantiq,output = <1>;
- };
- pcie-rst {
- lantiq,pins = "io38";
- lantiq,pull = <0>;
- lantiq,output = <1>;
- };
- };
- pins_spi_default: pins_spi_default {
- spi_in {
- lantiq,groups = "spi_di";
- lantiq,function = "spi";
- };
- spi_out {
- lantiq,groups = "spi_do", "spi_clk",
- "spi_cs4";
- lantiq,function = "spi";
- lantiq,output = <1>;
- };
- };
-};
-
-&pci0 {
- status = "okay";
- gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-};
-
-&spi {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&pins_spi_default>;
-
- m25p80@4 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <4 0>;
- spi-max-frequency = <33250000>;
- m25p,fast-read;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- reg = <0x0 0x20000>;
- label = "u-boot";
- read-only;
- };
-
- partition@20000 {
- reg = <0x20000 0xf90000>;
- label = "firmware";
- };
-
- partition@fb0000 {
- reg = <0xfb0000 0x10000>;
- label = "radioDECT";
- read-only;
- };
-
- partition@fc0000 {
- reg = <0xfc0000 0x10000>;
- label = "config";
- read-only;
- };
-
- romfile: partition@fd0000 {
- reg = <0xfd0000 0x10000>;
- label = "romfile";
- read-only;
- };
-
- partition@fe0000 {
- reg = <0xfe0000 0x10000>;
- label = "rom";
- read-only;
- };
-
- partition@ff0000 {
- reg = <0xff0000 0x10000>;
- label = "radio";
- read-only;
- };
- };
- };
-};
-
-&usb_phy0 {
- status = "okay";
-};
-
-&usb_phy1 {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
- vbus-supply = <&usb_vbus>;
+ };
};
-&usb1 {
+&vmmc {
status = "okay";
- vbus-supply = <&usb_vbus>;
+ gpios = <&gpio 30 GPIO_ACTIVE_HIGH //fxs relay
+ &gpio 31 GPIO_ACTIVE_HIGH //still unknown
+ &gpio 3 GPIO_ACTIVE_HIGH>; //reset_slic?
};
diff --git a/target/linux/lantiq/image/tp-link.mk b/target/linux/lantiq/image/tp-link.mk
index e2dfc08fe50..bec9eafbd10 100644
--- a/target/linux/lantiq/image/tp-link.mk
+++ b/target/linux/lantiq/image/tp-link.mk
@@ -37,16 +37,28 @@ define Device/tplink_tdw8980
endef
TARGET_DEVICES += tplink_tdw8980
+define Device/tplink_vr200
+ $(Device/lantiqTpLink)
+ DEVICE_DTS := VR200
+ TPLINK_FLASHLAYOUT := 16Mltq
+ TPLINK_HWID := 0x63e64801
+ TPLINK_HWREV := 0x53
+ IMAGE_SIZE := 15808k
+ DEVICE_TITLE := TP-LINK Archer VR200
+ DEVICE_PACKAGES:= kmod-usb-dwc2 kmod-usb-ledtrig-usbport
+ SUPPORTED_DEVICES += VR200
+endef
+TARGET_DEVICES += tplink_vr200
+
define Device/tplink_vr200v
$(Device/lantiqTpLink)
DEVICE_DTS := VR200v
- TPLINK_BOARD_ID := ArcherVR200V
TPLINK_FLASHLAYOUT := 16Mltq
TPLINK_HWID := 0x73b70801
TPLINK_HWREV := 0x2f
IMAGE_SIZE := 15808k
DEVICE_TITLE := TP-LINK Archer VR200v
- DEVICE_PACKAGES:= kmod-usb-dwc2 kmod-usb-ledtrig-usbport
+ DEVICE_PACKAGES:= kmod-usb-dwc2 kmod-usb-ledtrig-usbport kmod-ltq-tapi kmod-ltq-vmmc
SUPPORTED_DEVICES += VR200v
endef
TARGET_DEVICES += tplink_vr200v
--
GitLab