diff --git a/target/linux/mpc85xx/base-files/etc/board.d/02_network b/target/linux/mpc85xx/base-files/etc/board.d/02_network
index 511b56b1cc72ab1405df6950f1623da0c73acd45..1fedb7962e200f4469b850ab5c5bf8612a5745c1 100755
--- a/target/linux/mpc85xx/base-files/etc/board.d/02_network
+++ b/target/linux/mpc85xx/base-files/etc/board.d/02_network
@@ -10,6 +10,9 @@ board_config_update
board=$(board_name)
case "$board" in
+hiveap-330)
+ ucidef_set_interfaces_lan_wan "eth1" "eth0"
+ ;;
tl-wdr4900-v1)
ucidef_add_switch "switch0" \
"0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan"
diff --git a/target/linux/mpc85xx/base-files/etc/diag.sh b/target/linux/mpc85xx/base-files/etc/diag.sh
index b269427a51640ba78a4a8060b305bb5fc2e85127..7261795197850784a2ba698a630acac593a7f074 100644
--- a/target/linux/mpc85xx/base-files/etc/diag.sh
+++ b/target/linux/mpc85xx/base-files/etc/diag.sh
@@ -5,11 +5,14 @@
. /lib/functions/leds.sh
get_status_led() {
- case $(board_name) in
- tl-wdr4900-v1)
- status_led="tp-link:blue:system"
- ;;
- esac
+ case $(board_name) in
+ hiveap-330)
+ status_led="hiveap-330:green:tricolor0"
+ ;;
+ tl-wdr4900-v1)
+ status_led="tp-link:blue:system"
+ ;;
+esac
}
set_state() {
diff --git a/target/linux/mpc85xx/base-files/lib/mpc85xx.sh b/target/linux/mpc85xx/base-files/lib/mpc85xx.sh
index 1a2a671e28ed3b0e82394292cfaa8b4b756e415e..065589f18f0e96a02f8f87efecf8f04ac2c73210 100755
--- a/target/linux/mpc85xx/base-files/lib/mpc85xx.sh
+++ b/target/linux/mpc85xx/base-files/lib/mpc85xx.sh
@@ -13,6 +13,9 @@ mpc85xx_board_detect() {
model=$(awk 'BEGIN{FS="[ \t]+:[ \t]"} /model/ {print $2}' /proc/cpuinfo)
case "$model" in
+ *"HiveAP-330")
+ name="hiveap-330"
+ ;;
*"TL-WDR4900 v1")
name="tl-wdr4900-v1"
;;
diff --git a/target/linux/mpc85xx/base-files/lib/preinit/05_set_iface_mac_mcp85xx b/target/linux/mpc85xx/base-files/lib/preinit/05_set_iface_mac_mcp85xx
new file mode 100644
index 0000000000000000000000000000000000000000..cecaee86b00a94598a861c6dd66c5e0eb218f53f
--- /dev/null
+++ b/target/linux/mpc85xx/base-files/lib/preinit/05_set_iface_mac_mcp85xx
@@ -0,0 +1,17 @@
+#!/bin/sh
+
+. /lib/functions.sh
+. /lib/functions/system.sh
+
+preinit_set_mac_address() {
+ case $(board_name) in
+ hiveap-330)
+ mac_wan=$(mtd_get_mac_binary hw-info 0)
+ [ -n "$mac_wan" ] && ifconfig eth0 hw ether "$mac_wan"
+ mac_lan=$(macaddr_add $(mtd_get_mac_binary hw-info 0) +1)
+ [ -n "$mac_lan" ] && ifconfig eth1 hw ether "$mac_lan"
+ ;;
+ esac
+}
+
+boot_hook_add preinit_main preinit_set_mac_address
diff --git a/target/linux/mpc85xx/base-files/lib/upgrade/platform.sh b/target/linux/mpc85xx/base-files/lib/upgrade/platform.sh
index 65b3674769c001d2091d68ab4dd2291f44e0fe87..9e3a3d661a7ed9bf9f4d5a18047a7fdf93f34290 100755
--- a/target/linux/mpc85xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/mpc85xx/base-files/lib/upgrade/platform.sh
@@ -4,6 +4,10 @@
PART_NAME=firmware
+get_magic_long_at() {
+ (get_image "$1" | dd bs=4 count=1 skip="$2" | hexdump -v -n 4 -e '1/1 "%02x"') 2>/dev/null
+}
+
tplink_get_hwid() {
local part
@@ -28,6 +32,29 @@ platform_check_image() {
[ "$#" -gt 1 ] && return 1
case $board in
+ hiveap-330)
+ local init_magic=$(get_magic_long_at "$1" "65536")
+ local root_magic=$(get_magic_long_at "$1" "131072")
+ local kernel_magic=$(get_magic_long_at "$1" "10551296")
+
+ [ "$magic" != "d00dfeed" ] && {
+ echo "Invalid dtb image type."
+ return 1
+ }
+ [ "$init_magic" != "27051956" ] && {
+ echo "Invalid initramfs image type."
+ return 1
+ }
+ [ "$root_magic" != "68737173" ] && {
+ echo "Invalid rootfs image type."
+ return 1
+ }
+ [ "$kernel_magic" != "27051956" ] && {
+ echo "Invalid kernel image type."
+ return 1
+ }
+ return 0
+ ;;
tl-wdr4900-v1)
[ "$magic" != "01000000" ] && {
echo "Invalid image type."
diff --git a/target/linux/mpc85xx/config-4.9 b/target/linux/mpc85xx/config-4.9
index 9086ba917754370198c15ac1e2227eded0b97257..46950e70c8607bd57734379c3bfbc4074e189af1 100644
--- a/target/linux/mpc85xx/config-4.9
+++ b/target/linux/mpc85xx/config-4.9
@@ -25,6 +25,7 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_ASN1=y
+CONFIG_AT803X_PHY=y
CONFIG_AUDIT_ARCH=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BOOKE=y
@@ -81,6 +82,7 @@ CONFIG_E500=y
CONFIG_EARLY_PRINTK=y
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
+CONFIG_EEPROM_LEGACY=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_EPAPR_BOOT is not set
CONFIG_ETHERNET_PACKET_MANGLE=y
@@ -161,6 +163,7 @@ CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING=y
+CONFIG_HIVEAP_330=y
CONFIG_HW_RANDOM=y
CONFIG_HZ=250
# CONFIG_HZ_100 is not set
@@ -168,6 +171,7 @@ CONFIG_HZ_250=y
CONFIG_HZ_PERIODIC=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MPC=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IOMMU_HELPER=y
@@ -180,17 +184,16 @@ CONFIG_ISA_DMA_API=y
CONFIG_KERNEL_GZIP=y
CONFIG_KERNEL_START=0xc0000000
# CONFIG_KSI8560 is not set
+CONFIG_LEDS_LP5521=y
+CONFIG_LEDS_LP55XX_COMMON=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_LIBFDT=y
CONFIG_LOWMEM_CAM_NUM=3
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_LXT_PHY=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MDIO_BOARDINFO=y
-# CONFIG_MFD_MAX77620 is not set
CONFIG_MIGRATION=y
# CONFIG_MMIO_NVRAM is not set
CONFIG_MODULES_USE_ELF_RELA=y
@@ -207,8 +210,8 @@ CONFIG_MPIC_TIMER=y
# CONFIG_MPIC_U3_HT_IRQS is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_MPILIB=y
-# CONFIG_MTD_CFI is not set
CONFIG_MTD_M25P80=y
+CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_SPI_NOR=y
# CONFIG_MVME2500 is not set
# CONFIG_NEED_DMA_MAP_STATE is not set
diff --git a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/hiveap-330.dts b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/hiveap-330.dts
new file mode 100644
index 0000000000000000000000000000000000000000..7900c40c7e8fab8515d1da18d52f7a06ea329b41
--- /dev/null
+++ b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/hiveap-330.dts
@@ -0,0 +1,227 @@
+/*
+ * Aerohive HiveAP-330 Device Tree Source
+ *
+ * Copyright (C) 2017 Chris Blake <chrisrblake93@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "fsl/p1020si-pre.dtsi"
+/ {
+ model = "Aerohive HiveAP-330";
+ compatible = "aerohive,hiveap-330";
+
+ chosen {
+ bootargs = "console=ttyS0,9600";
+ bootargs-override = "console=ttyS0,9600 noinitrd";
+ };
+
+ memory {
+ device_type = "memory";
+ };
+
+ board_lbc: lbc: localbus@ffe05000 {
+ reg = <0 0xffe05000 0 0x1000>;
+ ranges = <0x0 0x0 0x0 0xec000000 0x4000000>;
+
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x4000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ partition@0 {
+ reg = <0x0 0x40000>;
+ label = "dtb";
+ };
+
+ partition@40000 {
+ reg = <0x40000 0x40000>;
+ label = "initramfs";
+ };
+
+ partition@80000 {
+ reg = <0x80000 0x27c0000>;
+ label = "rootfs";
+ };
+
+ partition@2840000 {
+ reg = <0x2840000 0x800000>;
+ label = "kernel";
+ };
+
+ partition@3040000 {
+ reg = <0x3040000 0xec0000>;
+ label = "stock-jffs2";
+ read-only;
+ };
+
+ partition@3f00000 {
+ reg = <0x3f00000 0x20000>;
+ label = "hw-info";
+ read-only;
+ };
+
+ partition@3f20000 {
+ reg = <0x3f20000 0x20000>;
+ label = "boot-info";
+ read-only;
+ };
+
+ partition@3f40000 {
+ reg = <0x3f40000 0x20000>;
+ label = "boot-info-backup";
+ read-only;
+ };
+
+ partition@3f60000 {
+ reg = <0x3f60000 0x20000>;
+ label = "u-boot-env";
+ };
+
+ partition@3f80000 {
+ reg = <0x3f80000 0x80000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ firmware@0 {
+ reg = <0x0 0x3040000>;
+ label = "firmware";
+ };
+ };
+ };
+
+ board_soc: soc: soc@ffe00000 {
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
+
+ i2c@3100 {
+ tpm@29 {
+ compatible = "atmel,at97sc3204t";
+ reg = <0x29>;
+ };
+
+ lp5521@32 {
+ compatible = "national,lp5521";
+ reg = <0x32>;
+ clock-mode = /bits/ 8 <2>;
+ chan0 {
+ chan-name = "hiveap-330:red:tricolor0";
+ led-cur = /bits/ 8 <0x2f>;
+ max-cur = /bits/ 8 <0x5f>;
+ };
+ chan1 {
+ chan-name = "hiveap-330:green:tricolor0";
+ led-cur = /bits/ 8 <0x2f>;
+ max-cur = /bits/ 8 <0x5f>;
+ };
+ chan2 {
+ chan-name = "hiveap-330:blue:tricolor0";
+ led-cur = /bits/ 8 <0x2f>;
+ max-cur = /bits/ 8 <0x5f>;
+ };
+ };
+
+ /* Most likely SoC boot config */
+ eeprom@51 {
+ compatible = "eeprom";
+ reg = <0x51>;
+ };
+ };
+
+ mdio@24000 {
+ phy0: ethernet-phy@0 {
+ interrupts = <3 1 0 0>;
+ reg = <0x1>;
+ };
+
+ phy1: ethernet-phy@1 {
+ interrupts = <2 1 0 0>;
+ reg = <0x2>;
+ };
+ };
+
+ mdio@25000 {
+ status = "disabled";
+ };
+
+ mdio@26000 {
+ status = "disabled";
+ };
+
+ enet0: ethernet@b0000 {
+ status = "okay";
+ phy-handle = <&phy0>;
+ phy-connection-type = "rgmii-id";
+
+ };
+
+ enet1: ethernet@b1000 {
+ status = "disabled";
+ };
+
+ enet2: ethernet@b2000 {
+ status = "okay";
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ gpio0: gpio-controller@fc00 {
+ };
+
+ usb@22000 {
+ phy_type = "ulpi";
+ dr_mode = "host";
+ };
+
+ usb@23000 {
+ status = "disabled";
+ };
+ };
+
+ pci0: pcie@ffe09000 {
+ reg = <0x0 0xffe09000 0x0 0x1000>;
+ ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0x0 0xffc30000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xa0000000
+ 0x2000000 0x0 0xa0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ pci1: pcie@ffe0a000 {
+ reg = <0x0 0xffe0a000 0x0 0x1000>;
+ ranges = <0x2000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0x0 0xffc20000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xc0000000
+ 0x2000000 0x0 0xc0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ buttons {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ gpios = <&gpio0 8 1>; /* active low */
+ linux,code = <0x198>; /* KEY_RESTART */
+ };
+ };
+};
+/include/ "fsl/p1020si-post.dtsi"
diff --git a/target/linux/mpc85xx/files/arch/powerpc/platforms/85xx/hiveap-330.c b/target/linux/mpc85xx/files/arch/powerpc/platforms/85xx/hiveap-330.c
new file mode 100644
index 0000000000000000000000000000000000000000..f325b32ce6bed3f313ad9bed4e8a6a86c1c1bd1f
--- /dev/null
+++ b/target/linux/mpc85xx/files/arch/powerpc/platforms/85xx/hiveap-330.c
@@ -0,0 +1,89 @@
+/*
+ * Aerohive HiveAP-330 Board Setup
+ *
+ * Copyright (C) 2017 Chris Blake <chrisrblake93@gmail.com>
+ *
+ * Based on:
+ * mpc85xx_rdb.c:
+ * MPC85xx RDB Board Setup
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/of_platform.h>
+
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <mm/mmu_decl.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+#include "smp.h"
+
+#include "mpc85xx.h"
+
+void __init hiveap_330_pic_init(void)
+{
+ struct mpic *mpic;
+
+ mpic = mpic_alloc(NULL, 0,
+ MPIC_BIG_ENDIAN |
+ MPIC_SINGLE_DEST_CPU,
+ 0, 256, " OpenPIC ");
+
+ BUG_ON(mpic == NULL);
+ mpic_init(mpic);
+}
+
+/*
+ * Setup the architecture
+ */
+static void __init hiveap_330_setup_arch(void)
+{
+ if (ppc_md.progress)
+ ppc_md.progress("hiveap_330_setup_arch()", 0);
+
+ mpc85xx_smp_init();
+
+ fsl_pci_assign_primary();
+
+ printk(KERN_INFO "HiveAP-330 board from Aerohive\n");
+}
+
+machine_arch_initcall(hiveap_330, mpc85xx_common_publish_devices);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init hiveap_330_probe(void)
+{
+ if (of_machine_is_compatible("aerohive,hiveap-330"))
+ return 1;
+ return 0;
+}
+
+define_machine(hiveap_330) {
+ .name = "P1020 RDB",
+ .probe = hiveap_330_probe,
+ .setup_arch = hiveap_330_setup_arch,
+ .init_IRQ = hiveap_330_pic_init,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+ .pcibios_fixup_phb = fsl_pcibios_fixup_phb,
+#endif
+ .get_irq = mpic_get_irq,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
diff --git a/target/linux/mpc85xx/image/Makefile b/target/linux/mpc85xx/image/Makefile
index 25a9b070c5f9dff37ec5e9e256bfa076ef506c16..4738dcf1227d66d8c473b4162d24d3d397249e8f 100644
--- a/target/linux/mpc85xx/image/Makefile
+++ b/target/linux/mpc85xx/image/Makefile
@@ -21,7 +21,18 @@ endef
zImage:=$(BIN_DIR)/$(IMG_PREFIX)-zImage
-DTS_TARGETS = fsl/p1010rdb-pa tl-wdr4900-v1 fsl/p1020rdb
+DTS_TARGETS = hiveap-330 fsl/p1010rdb-pa tl-wdr4900-v1 fsl/p1020rdb
+
+define Build/empty-initramfs
+ -mkdir $(KDIR_TMP)/empty-initramfs; \
+ cd $(KDIR_TMP)/empty-initramfs; \
+ find . | cpio -o -H newc | gzip -9n > $(KDIR_TMP)/empty-initramfs.gpio.gz
+
+ -$(STAGING_DIR_HOST)/bin/mkimage -A $(LINUX_KARCH) -O linux -T ramdisk \
+ -C gzip -n "empty initramfs" \
+ -d $(KDIR_TMP)/empty-initramfs.gpio.gz \
+ $(KDIR_TMP)/$(IMG_PREFIX)-empty-initramfs.image
+endef
define Image/BuildKernel
cp $(KDIR)/zImage $(BIN_DIR)/$(IMG_PREFIX)-zImage
@@ -35,6 +46,21 @@ define Image/BuildKernel/Initramfs
ifeq ($(SUBTARGET),generic)
cp $(KDIR)/cuImage.tl-wdr4900-v1-initramfs $(BIN_DIR)/$(IMG_PREFIX)-tl-wdr4900-v1-initramfs.uImage
endif
+ifeq ($(SUBTARGET),p1020)
+ cp $(KDIR)/zImage-initramfs $(BIN_DIR)/$(IMG_PREFIX)-hiveap-330-initramfs.zImage
+endif
+endef
+
+define Image/Build/Aerohive
+ $(call Build/empty-initramfs)
+ifeq ($(2),hiveap-330)
+ ( \
+ dd if=$(BIN_DIR)/$(IMG_PREFIX)-$(2).fdt bs=256k conv=sync; \
+ dd if=$(KDIR_TMP)/$(IMG_PREFIX)-empty-initramfs.image bs=256k conv=sync; \
+ dd if=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=40704k conv=sync; \
+ dd if=$(KDIR)/zImage conv=sync; \
+ ) > $(BIN_DIR)/$(IMG_PREFIX)-$(2)-sysupgrade.img
+endif
endef
define Image/Build/TPLINK
@@ -50,6 +76,10 @@ define Image/Build/TPLINK
-o $(call sysupname,$(1),$(2))
endef
+define Image/Build/Profile/hiveap-330
+ $(call Image/Build/Aerohive,$(1),hiveap-330)
+endef
+
define Image/Build/Profile/TLWDR4900
$(call Image/Build/TPLINK,$(1),tl-wdr4900-v1,cuImage.tl-wdr4900-v1,0x49000001,1,16Mppc)
endef
diff --git a/target/linux/mpc85xx/p1020/profiles/aerohive.mk b/target/linux/mpc85xx/p1020/profiles/aerohive.mk
new file mode 100644
index 0000000000000000000000000000000000000000..0f5ace6c393095388172f04c5f8ce483196291bf
--- /dev/null
+++ b/target/linux/mpc85xx/p1020/profiles/aerohive.mk
@@ -0,0 +1,16 @@
+#
+# Copyright (C) 2017 Chris Blake <chrisrblake93@gmail.com>
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/hiveap-330
+ NAME:=Aerohive HiveAP-330
+ PACKAGES:=kmod-usb-storage kmod-ath9k wpad-mini kmod-tpm-i2c-atmel
+endef
+
+define Profile/hiveap-330/Description
+ Package set optimized for the Aerohive HiveAP-330.
+endef
+$(eval $(call Profile,hiveap-330))
diff --git a/target/linux/mpc85xx/patches-4.9/101-powerpc-85xx-hiveap-330-support.patch b/target/linux/mpc85xx/patches-4.9/101-powerpc-85xx-hiveap-330-support.patch
new file mode 100644
index 0000000000000000000000000000000000000000..ece8c7d80e264523f9341f46b1f8d57e9af3e523
--- /dev/null
+++ b/target/linux/mpc85xx/patches-4.9/101-powerpc-85xx-hiveap-330-support.patch
@@ -0,0 +1,30 @@
+--- a/arch/powerpc/platforms/85xx/Kconfig
++++ b/arch/powerpc/platforms/85xx/Kconfig
+@@ -48,6 +48,17 @@ config BSC9132_QDS
+ and dual StarCore SC3850 DSP cores.
+ Manufacturer : Freescale Semiconductor, Inc
+
++config HIVEAP_330
++ bool "Aerohive HiveAP-330"
++ select DEFAULT_UIMAGE
++ select ARCH_REQUIRE_GPIOLIB
++ select GPIO_MPC8XXX
++ help
++ This option enables support for the Aerohive HiveAP-330 board.
++
++ This board is a Concurrent Dual-Band wireless access point with a
++ Freescale P1020 SoC.
++
+ config MPC8540_ADS
+ bool "Freescale MPC8540 ADS"
+ select DEFAULT_UIMAGE
+--- a/arch/powerpc/platforms/85xx/Makefile
++++ b/arch/powerpc/platforms/85xx/Makefile
+@@ -9,6 +9,7 @@ obj-y += common.o
+ obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o
+ obj-$(CONFIG_BSC9132_QDS) += bsc913x_qds.o
+ obj-$(CONFIG_C293_PCIE) += c293pcie.o
++obj-$(CONFIG_HIVEAP_330) += hiveap-330.o
+ obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
+ obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
+ obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o