Newer
Older
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "FRITZ736X.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/mips/lantiq_rcu_gphy.h>
/ {
compatible = "avm,fritz7362sl", "avm,fritz736x", "lantiq,xway", "lantiq,vr9";
model = "AVM FRITZ!Box 7362 SL";
};
&power_green {
label = "fritz7362sl:green:power";
};
&power_red {
label = "fritz7362sl:red:power";
};
&info_green {
label = "fritz7362sl:green:info";
};
&wifi {
label = "fritz7362sl:green:wlan";
};
&info_red {
label = "fritz7362sl:red:info";
};
&dect {
label = "fritz7362sl:green:dect";
};
&gpio {
pins_spi_default: pins_spi_default {
spi_in {
lantiq,groups = "spi_di";
lantiq,function = "spi";
};
spi_out {
lantiq,groups = "spi_do", "spi_clk",
"spi_cs4";
lantiq,function = "spi";
lantiq,output = <1>;
};
};
};
&state_default {
nand {
lantiq,groups = "nand ale", "nand cle",
"nand cs1", "nand rd", "nand rdy";
lantiq,function = "ebu";
};
pcie-rst {
lantiq,pins = "io21";
lantiq,open-drain = <1>;
lantiq,output = <1>;
};
};
&spi {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pins_spi_default>;
flash@4 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <4 0>;
spi-max-frequency = <1000000>;
urlader: partition@0 {
reg = <0x0 0x40000>;
label = "urlader";
read-only;
};
partition@40000 {
reg = <0x40000 0x60000>;
label = "tffs (1)";
read-only;
};
partition@A0000 {
reg = <0xA0000 0x60000>;
label = "tffs (2)";
read-only;
};
};
};
&localbus {
nand@1 {
compatible = "lantiq,nand-xway";
lantiq,cs1 = <1>;
bank-width = <1>;
reg = <1 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
nand-ecc-mode = "on-die";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "kernel";
reg = <0x0 0x400000>;
};
partition@400000 {
label = "ubi";
reg = <0x400000 0x7c00000>;
};
};
};
};
&pcie0 {
gpio-reset = <&gpio 21 GPIO_ACTIVE_LOW>;
pcie@0 {
#size-cells = <1>;
#address-cells = <2>;
};
};