realtek: Add SDS configuration routines for the RTL93XX platforms

Adds configuration routines for the internal SerDes of the
RTL930X and RTL931X.

Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Signed-off-by: Birger Koblitz <git@birger-koblitz.de>

target/linux/realtek/files-5.10/arch/mips/include/asm/mach-rtl838x/mach-rtl83xx.h

@@ -224,6 +224,7 @@
 #define RTL838X_MODEL_NAME_INFO		(0x00D4)
 #define RTL839X_MODEL_NAME_INFO		(0x0FF0)
 #define RTL93XX_MODEL_NAME_INFO		(0x0004)
+#define RTL931X_CHIP_INFO_ADDR		(0x0008)
 
 #define RTL838X_LED_GLB_CTRL		(0xA000)
 #define RTL839X_LED_GLB_CTRL		(0x00E4)

target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/dsa.c

@@ -345,6 +345,7 @@ static void rtl93xx_phylink_validate(struct dsa_switch *ds, int port,
 	    state->interface != PHY_INTERFACE_MODE_QSGMII &&
 	    state->interface != PHY_INTERFACE_MODE_XGMII &&
 	    state->interface != PHY_INTERFACE_MODE_HSGMII &&
+	    state->interface != PHY_INTERFACE_MODE_10GBASER &&
 	    state->interface != PHY_INTERFACE_MODE_10GKR &&
 	    state->interface != PHY_INTERFACE_MODE_USXGMII &&
 	    state->interface != PHY_INTERFACE_MODE_INTERNAL &&
@@ -390,6 +391,9 @@ static void rtl93xx_phylink_validate(struct dsa_switch *ds, int port,
 		phylink_set(mask, 10000baseCR_Full);
 	}
 
+	if (state->interface == PHY_INTERFACE_MODE_USXGMII)
+		phylink_set(mask, 10000baseT_Full);
+
 	phylink_set(mask, 10baseT_Half);
 	phylink_set(mask, 10baseT_Full);
 	phylink_set(mask, 100baseT_Half);
@@ -736,9 +740,6 @@ static void rtl93xx_phylink_mac_config(struct dsa_switch *ds, int port,
 	if (priv->family_id == RTL9310_FAMILY_ID)
 		return rtl931x_phylink_mac_config(ds, port, mode, state);
 
-	reg = sw_r32(priv->r->mac_force_mode_ctrl(port));
-	reg &= ~(0xf << 3);
-
 	sds_num = priv->ports[port].sds_num;
 	pr_info("%s SDS is %d\n", __func__, sds_num);
 	if (sds_num >= 0) {
@@ -747,15 +748,14 @@ static void rtl93xx_phylink_mac_config(struct dsa_switch *ds, int port,
 			sds_mode = 0x12;
 			break;
 		case PHY_INTERFACE_MODE_1000BASEX:
-			sds_mode = 0x1b;  // 10G 1000X Auto
+			sds_mode = 0x04;
 			break;
 		case PHY_INTERFACE_MODE_XGMII:
 			sds_mode = 0x10;
 			break;
+		case PHY_INTERFACE_MODE_10GBASER:
 		case PHY_INTERFACE_MODE_10GKR:
-			sds_mode = 0x1a;
-			// We need to use media sel for fibre media:
-			reg |= BIT(16);
+			sds_mode = 0x1b; // 10G 1000X Auto
 			break;
 		case PHY_INTERFACE_MODE_USXGMII:
 			sds_mode = 0x0d;
@@ -768,6 +768,9 @@ static void rtl93xx_phylink_mac_config(struct dsa_switch *ds, int port,
 		rtl9300_sds_rst(sds_num, sds_mode);
 	}
 
+	reg = sw_r32(priv->r->mac_force_mode_ctrl(port));
+	reg &= ~(0xf << 3);
+
 	switch (state->speed) {
 	case SPEED_10000:
 		reg |= 4 << 3;
@@ -805,8 +808,17 @@ static void rtl83xx_phylink_mac_link_down(struct dsa_switch *ds, int port,
 				     phy_interface_t interface)
 {
 	struct rtl838x_switch_priv *priv = ds->priv;
+	u32 v;
+
 	/* Stop TX/RX to port */
 	sw_w32_mask(0x3, 0, priv->r->mac_port_ctrl(port));
+
+	// No longer force link
+	if (priv->family_id == RTL9300_FAMILY_ID)
+		v = RTL930X_FORCE_EN | RTL930X_FORCE_LINK_EN;
+	else if (priv->family_id == RTL9310_FAMILY_ID)
+		v = RTL931X_FORCE_EN | RTL931X_FORCE_LINK_EN;
+	sw_w32_mask(v, 0, priv->r->mac_port_ctrl(port));
 }
 
 static void rtl93xx_phylink_mac_link_down(struct dsa_switch *ds, int port,

target/linux/realtek/files-5.10/drivers/net/phy/rtl83xx-phy.h

@@ -58,9 +58,11 @@ struct __attribute__ ((__packed__)) fw_header {
 /* Registers of the internal Serdes of the 9300 */
 #define RTL930X_SDS_INDACS_CMD			(0x03B0)
 #define RTL930X_SDS_INDACS_DATA			(0x03B4)
+#define RTL930X_MAC_FORCE_MODE_CTRL		(0xCA1C)
 
 /*Registers of the internal SerDes of the 9310 */
 #define RTL931X_SERDES_INDRT_ACCESS_CTRL	(0x5638)
 #define RTL931X_SERDES_INDRT_DATA_CTRL		(0x563C)
 #define RTL931X_SERDES_MODE_CTRL		(0x13cc)
-#define RTL931X_PS_SERDES_OFF_MODE_CTRL		(0x13f4)
+#define RTL931X_PS_SERDES_OFF_MODE_CTRL_ADDR	(0x13F4)
+#define RTL931X_MAC_SERDES_MODE_CTRL(sds)	(0x136C + (((sds) << 2)))