Skip to content
Snippets Groups Projects
Commit a51078f7 authored by Adoal Xu's avatar Adoal Xu Committed by John Crispin
Browse files

ath79: add TP-Link TL-MR10U port 


Signed-off-by: default avatarAdoal Xu <adoalxu@gmail.com>
parent 4f632070
No related branches found
No related tags found
No related merge requests found
Hide whitespace changes
Inline Side-by-side
target/linux/ath79/base-files/etc/board.d/02_network
+ 1
− 0
View file @ a51078f7
......@@ -9,6 +9,7 @@ ath79_setup_interfaces()
case "$board" in
"avm,fritz300e"|\
"tplink,tl-mr10u"|\
"tplink,tl-wr703n"|\
"ubnt,unifi")
ucidef_set_interface_lan "eth0"
......
target/linux/ath79/dts/ar9331_tl-mr10u.dts 0 → 100644
+ 19
− 0
View file @ a51078f7
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar9331_tl-wr703n.dtsi"
/ {
model = "TP-Link MR10U";
compatible = "tplink,tl-mr10u";
reg_usb_vbus: reg_usb_vbus {
compatible = "regulator-fixed";
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio 28 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
target/linux/ath79/dts/ar9331_tl-wr703n.dts
+ 3
− 133
View file @ a51078f7
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9331.dtsi"
#include "ar9331_tl-wr703n.dtsi"
/ {
compatible = "tplink,tl-wr703n", "qca,ar9331";
model = "TP-Link TL-WR703N";
aliases {
serial0 = &uart;
led-status = &led_system;
};
memory@0 {
device_type = "memory";
reg = <0x0 0x2000000>;
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
gpio-leds {
compatible = "gpio-leds";
led_system: system {
label = "tl-wr703n:blue:system";
gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
};
};
reg_usb_vbus: reg_usb_vbus {
compatible = "regulator-fixed";
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
reg = <0x0 0x20000>;
label = "u-boot";
read-only;
};
firmware: partition@20000 {
reg = <0x20000 0x3d0000>;
label = "firmware";
};
art: partition@3f0000 {
reg = <0x3f0000 0x10000>;
label = "art";
read-only;
};
};
};
};
&eth0 {
status = "okay";
phy-handle = <&phy4>;
mtd-mac-address = <&uboot 0x1fc00>;
gmac-config {
device = <&gmac>;
switch-phy-addr-swap = <0>;
switch-phy-swap = <0>;
};
};
&gpio {
status = "okay";
};
&mdio0 {
status = "okay";
phy4: ethernet-phy@4 {
reg = <4>;
phy-mode = "mii";
};
};
&uart {
status = "okay";
};
&usb {
dr_mode = "host";
vbus-supply = <&reg_usb_vbus>;
status = "okay";
};
&usb_phy {
status = "okay";
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&uboot 0x1fc00>;
model = "TP-Link WR703N";
compatible = "tplink,tl-wr703n";
};
target/linux/ath79/dts/ar9331_tl-wr703n.dtsi 0 → 100644
+ 139
− 0
View file @ a51078f7
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9331.dtsi"
/ {
compatible = "tplink,tl-wr703n", "qca,ar9331";
model = "TP-Link TL-WR703N";
aliases {
serial0 = &uart;
led-status = &led_system;
};
memory@0 {
device_type = "memory";
reg = <0x0 0x2000000>;
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
gpio-leds {
compatible = "gpio-leds";
led_system: system {
label = "tl-wr703n:blue:system";
gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
};
};
reg_usb_vbus: reg_usb_vbus {
compatible = "regulator-fixed";
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
reg = <0x0 0x20000>;
label = "u-boot";
read-only;
};
firmware: partition@20000 {
reg = <0x20000 0x3d0000>;
label = "firmware";
};
art: partition@3f0000 {
reg = <0x3f0000 0x10000>;
label = "art";
read-only;
};
};
};
};
&eth0 {
status = "okay";
phy-handle = <&phy4>;
mtd-mac-address = <&uboot 0x1fc00>;
gmac-config {
device = <&gmac>;
switch-phy-addr-swap = <0>;
switch-phy-swap = <0>;
};
};
&gpio {
status = "okay";
};
&mdio0 {
status = "okay";
phy4: ethernet-phy@4 {
reg = <4>;
phy-mode = "mii";
};
};
&uart {
status = "okay";
};
&usb {
dr_mode = "host";
vbus-supply = <&reg_usb_vbus>;
status = "okay";
};
&usb_phy {
status = "okay";
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&uboot 0x1fc00>;
};
target/linux/ath79/image/tiny-tp-link.mk
+ 10
− 0
View file @ a51078f7
include ./common-tp-link.mk
define Device/tl-mr10u
$(Device/tplink-4mlzma)
ATH_SOC := ar9331
DEVICE_TITLE := TP-Link TL-MR10U
DEVICE_PACKAGES := kmod-usb-chipidea2
TPLINK_HWID := 0x00100101
SUPPORTED_DEVICES := tplink,tl-mr10u tl-mr10u
endef
TARGET_DEVICES += tl-mr10u
define Device/tl-wr703n
$(Device/tplink-4mlzma)
ATH_SOC := ar9331
......
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment

Hosted with love by Chaotikum e.V. Support us if you can