ramips: create shared DTSI for Netgear EX2700 and WN3000RP v3

This moves shared code of the named devices into a common DTSI.

Remove setting status="okay" for &gpio0 as it's not disabled in
mt7620a.dtsi.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

target/linux/ramips/dts/mt7620a_netgear_ex2700.dts

@@ -10,10 +10,7 @@
 
 /dts-v1/;
 
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "mt7620a_netgear_ex2700_wn3000rp-v3.dtsi"
 
 / {
 	compatible = "netgear,ex2700", "ralink,mt7620a-soc";
@@ -26,10 +23,6 @@
 		led-upgrade = &led_power_green;
 	};
 
-	chosen {
-		bootargs = "console=ttyS0,57600";
-	};
-
 	leds {
 		compatible = "gpio-leds";
 
@@ -69,86 +62,30 @@
 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
 	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
 };
 
-&gpio0 {
-	status = "okay";
-};
-
-&gpio1 {
-	status = "okay";
-};
-
-&spi0 {
-	status = "okay";
-
-	m25p80@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0x30000>;
-				read-only;
-			};
-
-			partition@30000 {
-				label = "u-boot-env";
-				reg = <0x30000 0x10000>;
-				read-only;
-			};
-
-			partition@40000 {
-				compatible = "denx,uimage";
-				label = "firmware";
-				reg = <0x40000 0x3b0000>;
-			};
-
-			art: partition@3f0000 {
-				label = "art";
-				reg = <0x3f0000 0x10000>;
-				read-only;
-			};
-		};
+&partitions {
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0 0x30000>;
+		read-only;
 	};
-};
 
-&ethernet {
-	mtd-mac-address = <&art 0x0>;
-};
+	partition@30000 {
+		label = "u-boot-env";
+		reg = <0x30000 0x10000>;
+		read-only;
+	};
 
-&wmac {
-	mtd-mac-address = <&art 0x6>;
-	ralink,mtd-eeprom = <&art 0x1000>;
-};
+	partition@40000 {
+		compatible = "denx,uimage";
+		label = "firmware";
+		reg = <0x40000 0x3b0000>;
+	};
 
-&pinctrl {
-	state_default: pinctrl0 {
-		default {
-			ralink,group = "i2c", "uartf", "spi refclk";
-			ralink,function = "gpio";
-		};
+	art: partition@3f0000 {
+		label = "art";
+		reg = <0x3f0000 0x10000>;
+		read-only;
 	};
 };

target/linux/ramips/dts/mt7620a_netgear_ex2700_wn3000rp-v3.dtsi

+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "mt7620a.dtsi"
+
+/ {
+	chosen {
+		bootargs = "console=ttyS0,57600";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	m25p80@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions: partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
+
+&ethernet {
+	mtd-mac-address = <&art 0x0>;
+};
+
+&wmac {
+	ralink,mtd-eeprom = <&art 0x1000>;
+	mtd-mac-address = <&art 0x6>;
+};
+
+&pinctrl {
+	state_default: pinctrl0 {
+		default {
+			ralink,group = "i2c", "uartf", "spi refclk";
+			ralink,function = "gpio";
+		};
+	};
+};

target/linux/ramips/dts/mt7620a_netgear_wn3000rp-v3.dts

@@ -2,10 +2,7 @@
 
 /dts-v1/;
 
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
+#include "mt7620a_netgear_ex2700_wn3000rp-v3.dtsi"
 
 / {
 	compatible = "netgear,wn3000rp-v3", "ralink,mt7620a-soc";
@@ -18,10 +15,6 @@
 		led-upgrade = &led_power_green;
 	};
 
-	chosen {
-		bootargs = "console=ttyS0,57600";
-	};
-
 	leds {
 		compatible = "gpio-leds";
 
@@ -71,82 +64,30 @@
 			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
 		};
 	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
 };
 
-&gpio1 {
-	status = "okay";
-};
-
-&spi0 {
-	status = "okay";
-
-	m25p80@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0x30000>;
-				read-only;
-			};
-
-			partition@30000 {
-				label = "u-boot-env";
-				reg = <0x30000 0x10000>;
-				read-only;
-			};
-
-			partition@40000 {
-				compatible = "denx,uimage";
-				label = "firmware";
-				reg = <0x40000 0x7b0000>;
-			};
-
-			art: partition@7f0000 {
-				label = "art";
-				reg = <0x7f0000 0x10000>;
-				read-only;
-			};
-		};
+&partitions {
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0 0x30000>;
+		read-only;
 	};
-};
 
-&ethernet {
-	mtd-mac-address = <&art 0x0>;
-};
+	partition@30000 {
+		label = "u-boot-env";
+		reg = <0x30000 0x10000>;
+		read-only;
+	};
 
-&wmac {
-	mtd-mac-address = <&art 0x6>;
-	ralink,mtd-eeprom = <&art 0x1000>;
-};
+	partition@40000 {
+		compatible = "denx,uimage";
+		label = "firmware";
+		reg = <0x40000 0x7b0000>;
+	};
 
-&pinctrl {
-	state_default: pinctrl0 {
-		default {
-			ralink,group = "i2c", "uartf", "spi refclk";
-			ralink,function = "gpio";
-		};
+	art: partition@7f0000 {
+		label = "art";
+		reg = <0x7f0000 0x10000>;
+		read-only;
 	};
 };