uboot-sunxi: refresh patches

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

package/boot/uboot-sunxi/patches/003-add-theobroma-a31-pangolin.patch

 --- a/arch/arm/dts/Makefile
 +++ b/arch/arm/dts/Makefile
-@@ -254,6 +254,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \
+@@ -261,6 +261,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \
  	sun6i-a31-m9.dtb \
  	sun6i-a31-mele-a1000g-quad.dtb \
  	sun6i-a31-mixtile-loftq.dtb \
@@ -360,7 +360,7 @@
 +CONFIG_SUNXI_SPI=y
 --- a/arch/arm/mach-sunxi/Kconfig
 +++ b/arch/arm/mach-sunxi/Kconfig
-@@ -746,6 +746,14 @@ config VIDEO_LCD_PANEL_I2C_SCL
+@@ -752,6 +752,14 @@ config VIDEO_LCD_PANEL_I2C_SCL
  	Set the SCL pin for the LCD i2c interface. This takes a string in the
  	format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
  

package/boot/uboot-sunxi/patches/091-sun6i-sync-PLL1-multdiv-with-Boot1.patch

@@ -14,7 +14,7 @@ More specifically, the following settings are now used:
 
 --- a/arch/arm/mach-sunxi/clock_sun6i.c
 +++ b/arch/arm/mach-sunxi/clock_sun6i.c
-@@ -107,11 +107,12 @@ void clock_set_pll1(unsigned int clk)
+@@ -113,11 +113,12 @@ void clock_set_pll1(unsigned int clk)
  	struct sunxi_ccm_reg * const ccm =
  		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
  	const int p = 0;

package/boot/uboot-sunxi/patches/101-sun6i-support-console-on-UART2.patch

@@ -6,7 +6,7 @@ Subject: ARM: sun6i: Support console on UART2 (GPG6/GPG7)
 
 --- a/arch/arm/mach-sunxi/board.c
 +++ b/arch/arm/mach-sunxi/board.c
-@@ -126,6 +126,10 @@ static int gpio_init(void)
+@@ -124,6 +124,10 @@ static int gpio_init(void)
  	sunxi_gpio_set_cfgpin(SUNXI_GPG(3), SUN5I_GPG_UART1);
  	sunxi_gpio_set_cfgpin(SUNXI_GPG(4), SUN5I_GPG_UART1);
  	sunxi_gpio_set_pull(SUNXI_GPG(4), SUNXI_GPIO_PULL_UP);
@@ -19,7 +19,7 @@ Subject: ARM: sun6i: Support console on UART2 (GPG6/GPG7)
  	sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUN8I_GPB_UART2);
 --- a/include/configs/sunxi-common.h
 +++ b/include/configs/sunxi-common.h
-@@ -259,6 +259,8 @@ extern int soft_i2c_gpio_scl;
+@@ -256,6 +256,8 @@ extern int soft_i2c_gpio_scl;
  #endif
  #elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I)
  #define OF_STDOUT_PATH		"/soc@01c00000/serial@01c28400:115200"

package/boot/uboot-sunxi/patches/102-sunxi-make_CONS_INDEX-configurable.patch

@@ -6,7 +6,7 @@ Subject: ARM: sunxi: Make CONS_INDEX configurable
 
 --- a/arch/arm/mach-sunxi/Kconfig
 +++ b/arch/arm/mach-sunxi/Kconfig
-@@ -412,6 +412,14 @@ config SYS_BOARD
+@@ -416,6 +416,14 @@ config SYS_BOARD
  config SYS_SOC
  	default "sunxi"
  

package/boot/uboot-sunxi/patches/300-sunxi-add-device-tree-for-Orange-Pi-R1-board.patch

@@ -12,9 +12,9 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 
 --- a/arch/arm/dts/Makefile
 +++ b/arch/arm/dts/Makefile
-@@ -310,6 +310,7 @@ dtb-$(CONFIG_MACH_SUN8I_A83T) += \
- 	sun8i-a83t-cubietruck-plus.dtb \
- 	sun8i-a83t-sinovoip-bpi-m3.dtb
+@@ -318,6 +318,7 @@ dtb-$(CONFIG_MACH_SUN8I_A83T) += \
+ 	sun8i-a83t-bananapi-m3.dtb \
+ 	sun8i-a83t-cubietruck-plus.dtb
  dtb-$(CONFIG_MACH_SUN8I_H3) += \
 +	sun8i-h2-plus-orangepi-r1.dtb \
  	sun8i-h2-plus-orangepi-zero.dtb \

package/boot/uboot-sunxi/patches/301-sunxi-add-orangepi-R1-defconfig.patch

@@ -12,7 +12,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 
 --- a/board/sunxi/MAINTAINERS
 +++ b/board/sunxi/MAINTAINERS
-@@ -302,6 +302,11 @@ M:	Jagan Teki <jagan@amarulasolutions.co
+@@ -326,6 +326,11 @@ M:	Jagan Teki <jagan@amarulasolutions.co
  S:	Maintained
  F:	configs/orangepi_prime_defconfig