ipq40xx: detangle ath10k-board-qca4019 from ath10k-firmware-qca4019*

Back in the day, the board-2.bin came with ath10k-firmware-qca4019.
This changed with
commit c3b2efaf ("linux-firmware: ath10k: add board firmware packages")
which placed the board-2.bin into a separate package: ath10k-board-qca4019.
This was great, because it addressed one of the caveat of the original
ipq-wifi package:
commit fa03d441 ("firmware: add custom IPQ wifi board definitions")

|  2. updating ath10k-firmware-qca4019 will also replace
|      the board-2.bin. For this cases the user needs to
|      manually reinstall the wifi-board package once the
|      ath10k-firmware-qca4019 is updated.

This could be extended further so that ipq-wifi packages
no longer use "install-override" and the various QCA4019
variants list the ath10k-board-qca4019 as a CONFLICT
package.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>

package/firmware/ath10k-ct-firmware/Makefile

@@ -292,7 +292,6 @@ $(Package/ath10k-ct-firmware-default)
   CATEGORY:=Firmware
   PROVIDES:=ath10k-firmware-qca4019
   CONFLICTS:=ath10k-firmware-qca4019
-  DEPENDS:=+ath10k-board-qca4019
 endef
 define Package/ath10k-firmware-qca4019-ct-full-htt
 $(Package/ath10k-ct-firmware-default)
@@ -307,7 +306,6 @@ $(Package/ath10k-ct-firmware-default)
     ath10k-firmware-qca4019-ct \
     ath10k-firmware-qca4019-ct-htt
   DEPENDS:=\
-    +ath10k-board-qca4019 \
     +!PACKAGE_kmod-ath10k-ct-smallbuffers:kmod-ath10k-ct
 endef
 define Package/ath10k-firmware-qca4019-ct-htt
@@ -322,7 +320,6 @@ $(Package/ath10k-firmware-default)
     ath10k-firmware-qca4019 \
     ath10k-firmware-qca4019-ct
   DEPENDS:=\
-    +ath10k-board-qca4019 \
     +!PACKAGE_kmod-ath10k-ct-smallbuffers:kmod-ath10k-ct
 endef
 

package/firmware/linux-firmware/qca_ath10k.mk

@@ -33,7 +33,7 @@ define Package/ath10k-board-qca4019/install
 		$(1)/lib/firmware/ath10k/QCA4019/hw1.0/
 endef
 $(eval $(call BuildPackage,ath10k-board-qca4019))
-Package/ath10k-firmware-qca4019 = $(call Package/firmware-default,ath10k qca4019 firmware,+ath10k-board-qca4019)
+Package/ath10k-firmware-qca4019 = $(call Package/firmware-default,ath10k qca4019 firmware)
 define Package/ath10k-firmware-qca4019/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA4019/hw1.0
 	$(INSTALL_DATA) \

target/linux/ipq40xx/Makefile

@@ -19,6 +19,6 @@ DEFAULT_PACKAGES += \
 	kmod-leds-gpio kmod-gpio-button-hotplug swconfig \
 	kmod-ath10k-ct wpad-basic-wolfssl \
 	kmod-usb3 kmod-usb-dwc3 ath10k-firmware-qca4019-ct \
-	uboot-envtools
+	ath10k-board-qca4019 uboot-envtools
 
 $(eval $(call BuildTarget))