Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>

The Annex A firmware will be updated to:
05.08.01.08.01.06_05.08.00.0B.01.01_osc

The Annex B firmware will be updated to:
05.07.09.09.00.06_05.07.04.04.00.02_osc

Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>

The following patches were removed:
010-networking-fix-uninitialized-memory-when-displaying-.patch
  https://git.busybox.net/busybox/commit/?id=f2c043acfcf9dad9fd3d65821b81f89986bbe54e

030-ip-fix-problem-on-mips64-n64-big-endian-musl-systems.patch
  https://git.busybox.net/busybox/commit/?id=4ab372d49a6e82b0bf097dedb96d26330c5f2d5f

204-udhcpc_src_ip_rebind.patch
  https://git.busybox.net/busybox/commit/?id=abe8f7515aded80889d78c2c1c8947997918cf90

230-ntpd_delayed_resolve.patch
  https://git.busybox.net/busybox/commit/?id=c8641962e4cbde48108ddfc1c105e3320778190d
  https://git.busybox.net/busybox/commit/?id=e4caf1dd9ce8569371a0eeb77ccf02a572dc0f11



260-arping_missing_includes.patch
  Not needed any more, still builds with musl for me.
  Add in 92fd6e6f "busybox: fix arping applet building on musl"

The Kconfig files were updated with these commands:
cd config
../convert_menuconfig.pl .../build_dir/target-*/busybox-1.25.0
cd ..
./convert_defaults.pl < .../build_dir/target-*/busybox-1.25.0/.config > Config-defaults.in

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Some devices (like the Cisco Meraki Z1 Cloud Managed Teleworker Gateway)
need to be able to initialize the PCIe wifi device. Normally, this is done
during the early stages of booting linux, because the necessary init code
is read from the memory mapped SPI and passed to pci_enable_ath9k_fixup.
However,this isn't possible for devices which have the init code for the
Atheros chip stored on NAND in an UBI volume. Hence, this module can be
used to initialze the chip when the user-space is ready to extract the
init code.

Martin Blumenstingl made a few fixes and added support for lantiq:
kernel: owl-loader: add support for OWL emulation PCI devices
kernel: owl-loader: don't re-scan the bus when ath9k_pci_fixup failed
kernel: owl-loader: use dev_* instead of pr_* logging functions
kernel: owl-loader: auto-generate the eeprom filename as fallback
kernel: owl-loader: add a debug message when swapping the eeprom data
kernel: owl-loader: add missing newlines in log messages
kernel: owl-loader: add support for the lantiq platform

These patches have been integrated. Thanks!

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

This patch adds firmware generation tool for Cisco's Z1

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

Signed-off-by: John Crispin <john@phrozen.org>

The default configuration might not be suitable for
every use case. Add options to enable/disable additional
options.

Signed-off-by: Andreas Schultz <aschultz@tpip.net>

Match sections allow to set a tag specified by the option networkid if the client
sends an option and optionally the option value specified by the match option.
The force option will convert the dhcp-option to force-dhcp-option if set to 1 in
the dnsmasq config if options are specified in the dhcp_option option.

config match
    option networkid tag
    option match 12,myhost
    option force 1
    list dhcp_option '3,192.168.1.1'

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

General convention is to keep U-Boot and radio calibration
data (ART) mtd partitions marked as read-only.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

because with the current system I'm getting fake uImages that are actually a
renamed zImage, and that's plain wrong.
This fixes bug https://bugs.lede-project.org/index.php?do=details&task_id=131
and https://bugs.lede-project.org/index.php?do=details&task_id=139



Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>

print a warning when a shell spawns, telling users to set a root password.

Signed-off-by: John Crispin <john@phrozen.org>

This changes the sysupgrade format. To support upgrades from the old
firmware to the new one, legacy images are provided. Because of the old
partition split, these have to be specific to the NOR or SPI device.

The new sysupgrade images are suitable for begin put on flash directly,
and they are independent of NOR vs SPI flash variant.

Flashing back to old firmware is supported via using the old full-flash
images instead of the old sysupgrade images.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

This driver allows to monitor netlink communication on the system.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

A padding to align a message should not only be added between
different attributes of a netlink message, but also at the end of the
message to pad it to the correct size.

Without this patch the following command does not work and returns an
error code:
ip link add type nlmon

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

This adds e.g. BCM43430 firmware (not packaged yet).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

linux 4.4.21 adds 2 new symbols for arm64.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Refresh patches for all targets that support kernel 4.4.
Compile-tested on brcm2708 only.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Now that RTL8188EU is supported in rtl8xxu select it for pcDuino v3

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Patches by Jes Sorensen:
https://git.kernel.org/cgit/linux/kernel/git/jes/linux.git/



Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

This is consistent with the names used for other realtek firmwares.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Now that we have firmwares separated and brcm2708 being the only target that
actually selects SDIO support, avoid selecting all firmwares by default.
sunxi should select the proper firmwares once SDIO support is enabled and
tested.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

This is consistent with the rest of brcmfmac firmwares.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Using few packages will allow saving some space by decreasing rootfs
size.

Moreover there are more firmware files that may require packaging and
even more to come later.

This can especially useful now, with per device rootfs.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

There are currently two stock firmwares for the TL-WDR3600/4300, a US and
a universal version. Both allow installing images with US region code, so
we don't need to provide multiple images.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

Simplify modifying some of the images without affecting the others.

While we're at it, also unify the profiles to use := syntax and add "v1" to
the TL-WDR4300 name to make things more consistent.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

This device is present on the Gateworks Laguna cns3xxx family.

As the SPI bus master is enabled, also enable driver support for
this typical slave.

[    3.920000] m25p80 spi1.0: found m25p32, expected m25p80
[    3.930000] m25p80 spi1.0: m25p32 (4096 Kbytes)
[    3.930000] Creating 4 MTD partitions on "spi1.0":
[    3.940000] 0x000000000000-0x000000040000 : "uboot"
[    3.940000] 0x000000040000-0x000000080000 : "params"
[    3.950000] 0x000000080000-0x000000200000 : "kernel"
[    3.950000] 0x000000200000-0x000000400000 : "rootfs"

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>

clean up usb gadget support:
- rename gadget modules so that they appear together and are easier to
  identify as gadget modules
- make usb-lib-composite and usb-gadget hidden as there is no point in
  selecting those without gadget drivers that require them as deps

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

The D-Link DIR-860L B1 has a flash chip which doesn't support
4K sectors. Since the DIR-860L B1 was the only mt7621 board which had
the 4k blocksize set, the 4K sector support is removed from the kernel
config.

I've checked the flash chips of all boards having set a 4K blocksize
again. This time I searched harder to finding bootlogs instead of
relying on wikis articles and/or the device tree source file.

The Planex MZK-DP150N has an en25q32b instead of the mentioned one in
the dts. Albeit the en25q32b supports 4K sectors, 4K support is not
enabled in the driver. Change the blocksize for this board back to 64K.

Reported-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Mathias Kresin <dev@kresin.me>

Refresh patches for all targets that support kernel 4.4.
Compile-tested on brcm2708 only.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Now we have firmwares separated and bcm53xx selecting required ones make
use of it to actually save that rootfs space.
Other targets using brcmfmac (brcm2708 and sunxi) use SDIO interface and
firmware so they don't won't be affected.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

fixes cleanup of mount points

Signed-off-by: John Crispin <john@phrozen.org>

This is a follow up to 28110727
"ramips: set blocksize for 4MB devices". I've missed to include the
required changes of the kernel configs to enable 4K sector size
support.

The option is only enabled for targets having boards with 4k sector
size flash chips.

Signed-off-by: Mathias Kresin <dev@kresin.me>