The IMAGE_NAME redefinition causes overwriting of generated SD card
image when multiple root file system types are selected. In result only
single SD card image is generated. This commit fixes this behaviour.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>

U-Boot already knows where it found the boot.scr, and
figuring out the partition UUID becomes trivial at this point.
This change allows booting OpenWrt from whatever storage it has been
flashed to: SD card, eMMC, USB disk or SATA disk.

Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
[replace lede with openwrt, redact commit message]
Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>

I am not aware of any regressions in kernel 4.14 compared to kernel 4.9.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

The Armada XP uses a Marvell PJ4Bv7 Processor for which already one
workaround for an errata is activated.
The Armada 285 uses a Cortex A9 r4p1 for which the Linux kernel provides
a workaround for ERRATA_764369, activate this.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

move to latest version, address vfs_write issue

Signed-off-by: Kabuli Chana <newtownBuild@gmail.com>

This is deactivated in all targets using the DSA switch driver with
kernel 4.14.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

The split-up into packages gre, grev4 and grev6 causes confusion for the
users as reported in FS#1399.
As IPv4 and IPv6 are considered now as bundled; squash the grev4 and grev6
packages into the gre package and let gre provide both grev4 and grev6.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

Fixes the assumption the busybox udhcpc applet is always enabled; in case
the symbolic link check fails the DHCP shell handler script will exit and
as result the DHCP protocol handler will not be registered in netifd.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

This is to simplify maintenance. It's easy to say now which patches need
some extra work and/or sending upstream. Updating to newer backports
should be also simpler with this.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

This reverts commit 79a768a9.
Some devices can go over their power limits with this commit, so this
needs to be handled on a case by case basis instead

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Improves 2.4 GHz throughput

Signed-off-by: Felix Fietkau <nbd@nbd.name>

The cck rates array needs to be initialized for both the minstrel and
the minstrel_ht variant

Signed-off-by: Felix Fietkau <nbd@nbd.name>

There was a mismatch between indicating factory reset and code actually
starting it. After 5 seconds status LED started blinking rapidly letting
user know it's ready to release reset button. In practice button had to
stay pressed for another second in order to relly start the process.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Remove RPS/XPS support from netifd core, move the logic to a hotplug
script that uses a different policy which provides better performance
and more fairness across flows

Signed-off-by: Felix Fietkau <nbd@nbd.name>

With this change, the timestamp variable is only used in ag71xx_check_dma_stuck. Small tx speedup.

Based on a Qualcomm commit. ag->timestamp = jiffies was not replaced with netif_trans_update(dev) because of this quote:

It should be noted that after this series several instances
of netif_trans_update() are useless (if they occur in
.ndo_start_xmit and driver doesn't set LLTX flag -- stack already
did an update).

From: http://lists.openwall.net/netdev/2016/05/03/87



Signed-off-by: Rosen Penev <rosenp@gmail.com>

This will be required for Open vSwitch geneve tunneling support

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

Upstream handling of MIPS CPU IRQs is rather hackish and the interrupts
are being enabled unconditionally in various places because of legacy
code.
Performance counter events are routed both through the GIC and through
legacy CPU IRQ7 events, causing spurious interrupts.

Fix this by disabling IRQ7 when trying to access the performance counter
IRQ.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Looking for a wrong LED file name was stopping this code from find any
LED. This affects devices with only a red/amber power LED.

Fixes: 3aaee1ba ("bcm53xx: failsafe support")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

Support config in the form of ....
	add_list sendopts=router:10.10.10.2
	add_list sendopts=nissrv:20.20.20.2
	add_list sendopts=0x7D:abba

This allows to configure sendopts having white spaces as option value

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

This reverts commit 968b8616.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

This bug was causing miscompiled code related to branch delay slots

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

This fixes a compile bug found by build bot with kernel 3.18

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

When CGROUPS is enabled the new option CONFIG_CGROUP_NET_CLASSID is
selectable and not handled.
Add this option to the 4.14 kernel configuration.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

With this, `mount -t efivarfs` is available and tools such as efitools
and efibootmgr will be usable.

Signed-off-by: Alif M. Ahmad <alive4ever@live.com>
[daniel@makrotopia.org: some whitespace fixes, match From: with SoB]