Add nonshared flag to package depending on specific targets or subtargets as
there's no guarantee otherwise that they'll be available in the shared repo.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

This regression was introduced while rebasing LEDE's commits over the latest
OpenWrt repository.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Add required architecture overrides to enable SAMA5 boards in Kconfig, add
resulting missing symbols, reorder config and remove unrelated XEN setting.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

The kmod-acpi-button functionality is included in the kernel where needed
and the corresponding kmod package has been deleted long ago, therfor drop
the remaining references now.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Update to latest make_ext4fs Git HEAD to fix build with recent glibc version
which does not implicitely includes sysmacros.h anymore.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

As usual these patches were extracted from the raspberry pi repo:
https://github.com/raspberrypi/linux/tree/rpi-4.4.y



Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Replace undefined iph for ip_hdr(skb)

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

When the same package file is specified multiple times on the opkg install
command line, the name pointer on the argv array becomes stale after the
package structures have been merged, leading to invalid memory accesses
upon install.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

The libc and kernel package files moved since the introduction of shared
packages and the changed output directory layout. This causes the generated
ImageBuilder archive to lack the necessary "libc" and "kernel" meta packages,
leading to opkg install errors later on.

Use the FeedPackageDir macro to figure out the proper source directory to use.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Instead of converting the firmware files ourselves, use the files
generated during the normal kernel build process. This fixes packaging
kmod-e100 in the SDK environment.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Bundle all firmware files which have been built along with the kernel to fix
packaging of kmods in the SDK environment that rely on in-tree firmwares,
specifically kmod-e100.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

explicitly create the bin dir

Signed-off-by: John Crispin <john@phrozen.org>

Signed-off-by: John Crispin <john@phrozen.org>

Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>

Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
Signed-off-by: John Crispin <john@phrozen.org>

preinit spews out this message

"cat: can't open '/proc/device-tree/model': No such file or directory"

Signed-off-by: John Crispin <john@phrozen.org>

Change tar exclude pattern to skip ccache directory contents but not the
ccache executable itself.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Add $ARCH and $CPU_SUBTYPE to the package architecture strings to differentiate
low and big endian targets as well as extended instructions sets like NEON
or DSP2.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Implement a crude but functioning sysupgrade image check for the
Raspberry Pi. The code only checks if the master boot record boot
signature (0x55aa) is present in the first 512-bytes at the correct
location. This can prevent the odd bricking of a system when flashing
the wrong file.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

Use git revision as package release and date for package version.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Use git revision as package release and date for package version.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Fix nonshared flag handling to properly deal with source packages defining
both kmod and non-kmod ipks.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

One of the patched files, include/unwind-cxx.h, contains windows newlines
which lead to the following failure:

  Applying ./patches/006-eabi_fix.patch using plaintext:
  patching file include/typeinfo
  patching file include/unwind-cxx.h
  Hunk #1 FAILED at 173 (different line endings).
  Hunk #2 FAILED at 181 (different line endings).

Add a fixup command to the prepare phase which normalizes the line endings
before applying source patches.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Fix standalone ImageBuilders after the package layout rework.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

- Add %A placeholder for substituting the package architecture
- Change %U placeholder to refer to the toplevel repository URL
- Construct package feed URLs relative to the toplevel one to match new layout

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Use the new repository metadata field to choose the output directory of the
final package archives.

Non-sharable packages will be placed in the per-target package directory
while the rest will be placed in a per-repository sub directory within the
$OUTPUT_DIR/packages/$CPU_TYPE/ prefix.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Introduce a new symbol ALL_NONSHARED which selects all non-sharable packages
by default. This option is mainly intented for buildbot setups to build the
target dependant software subset only.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

Signed-off-by: Jo-Philipp Wich <jo@mein.io>