Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

This is to simplify maintenance. It's easy to say now which patches need
some extra work and/or sending upstream. Updating to newer backports
should be also simpler with this.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

This reverts commit 79a768a9.
Some devices can go over their power limits with this commit, so this
needs to be handled on a case by case basis instead

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Improves 2.4 GHz throughput

Signed-off-by: Felix Fietkau <nbd@nbd.name>

The cck rates array needs to be initialized for both the minstrel and
the minstrel_ht variant

Signed-off-by: Felix Fietkau <nbd@nbd.name>

There was a mismatch between indicating factory reset and code actually
starting it. After 5 seconds status LED started blinking rapidly letting
user know it's ready to release reset button. In practice button had to
stay pressed for another second in order to relly start the process.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Remove RPS/XPS support from netifd core, move the logic to a hotplug
script that uses a different policy which provides better performance
and more fairness across flows

Signed-off-by: Felix Fietkau <nbd@nbd.name>

With this change, the timestamp variable is only used in ag71xx_check_dma_stuck. Small tx speedup.

Based on a Qualcomm commit. ag->timestamp = jiffies was not replaced with netif_trans_update(dev) because of this quote:

It should be noted that after this series several instances
of netif_trans_update() are useless (if they occur in
.ndo_start_xmit and driver doesn't set LLTX flag -- stack already
did an update).

From: http://lists.openwall.net/netdev/2016/05/03/87



Signed-off-by: Rosen Penev <rosenp@gmail.com>

This will be required for Open vSwitch geneve tunneling support

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

Upstream handling of MIPS CPU IRQs is rather hackish and the interrupts
are being enabled unconditionally in various places because of legacy
code.
Performance counter events are routed both through the GIC and through
legacy CPU IRQ7 events, causing spurious interrupts.

Fix this by disabling IRQ7 when trying to access the performance counter
IRQ.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Looking for a wrong LED file name was stopping this code from find any
LED. This affects devices with only a red/amber power LED.

Fixes: 3aaee1ba ("bcm53xx: failsafe support")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

Support config in the form of ....
	add_list sendopts=router:10.10.10.2
	add_list sendopts=nissrv:20.20.20.2
	add_list sendopts=0x7D:abba

This allows to configure sendopts having white spaces as option value

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

This reverts commit 968b8616.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

This bug was causing miscompiled code related to branch delay slots

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

This fixes a compile bug found by build bot with kernel 3.18

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

When CGROUPS is enabled the new option CONFIG_CGROUP_NET_CLASSID is
selectable and not handled.
Add this option to the 4.14 kernel configuration.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

With this, `mount -t efivarfs` is available and tools such as efitools
and efibootmgr will be usable.

Signed-off-by: Alif M. Ahmad <alive4ever@live.com>
[daniel@makrotopia.org: some whitespace fixes, match From: with SoB]

CPU: H3 Quad-core Cortex-A7 H.265/HEVC 4K @ 1.3 Ghz
GPU: Mali400MP2 GPU @ 600MHz (supports OpenGL ES 2.0)
Memory: 1GB DDR3 (shared with GPU)
Onboard: Storage TF card (Max. 64GB) / MMC card slot
Onboard: Network 10/100M Ethernet RJ45
Onboard header pinout: SPI, I2C, 1-WIRE
USB 2.0: Three USB 2.0 HOST, One USB 2.0 OTG
Buttons: Power Button(SW4)
Debug TTL UART: ..DC-IN.. >[GND][RX][TX] ..HDMI..

Signed-off-by: Vitalij Alshevsky <v_alshevsky@tut.by>

Signed-off-by: Vitalij Alshevsky <v_alshevsky@tut.by>

As each mvebu device only uses one of the firmwares provided by mwlwifi
package, it makes sense to put them in separate packages and only install
the one that is needed.

Current mwlwifi version's firmware sizes and usages by devices:
88W8864.bin  118776  caiman, mamba, cobra, shelby
88W8897.bin  489932  (none)
88W8964.bin  449420  rango

Changes by this commit:
 * indicate in title that mwlwifi also is driver for 88W8897 and 88W8964
 * remove mwlwifi package's firmware installation rules
 * add 3 new individual firmware packages (all depends on kmod-mwlwifi):
    - mwlwifi-firmware-88w8864
    - mwlwifi-firmware-88w8897
    - mwlwifi-firmware-88w8964
 * add firmware package to mvebu devices' DEVICE_PACKAGES accordingly

Signed-off-by: Johnny S. Lee <_@jsl.io>
[Add the used FW files to the PACKAGES of default image]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

/lib/functions.sh can deal with Require-User specifications that only
contain a group, but no user. Adjust metadata.pm to allow such
specifications as well.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

Add the patch for reprobing phys also for 4.14, as it is still needed.

Fixes: 4ccad922 ("mvebu: Add support for kernel 4.14")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

When SFP support was accepted upstream, the expected GPIO names were
slightly changed, breaking SFP insert detection. Update the DTS file to
the expected name to make SFP work again.

Fixes: 4ccad922 ("mvebu: Add support for kernel 4.14")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

- fix TCP connection state
- fix checksum error on DNAT

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Allow building perf on uncommon targets again.

Depending on the kernel version, not all of these archs will actually use
libunwind in perf. Still, it seems simpler and less error-prone to use the
same list that is defined in the libunwind package.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

Works around two incompatiblities between glibc and (POSIX-compliant) musl:

- missing register definitions from asm/ptrace.h
- non-POSIX-compliant ucontext_t on PPC32 with glibc

Compile tested on mpc85xx.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

It also does not have any users yet. It will be addde back when the core
API issues have been sorted out

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Fixes issues with connections hanging after >30 seconds idle time

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>