This re-enables the vectoring error sample callback and adds a
dependency to the corresponding driver.

Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jan Hoffmann <jan@3e8.eu>

In order to calculate the required pre-distortion for downstream
vectoring, the vectoring control entity (VCE) at the carrier office
needs error samples from the modem. On Lantiq VR9 modems, error reports
are generated by the firmware, but need to be multiplexed into the data
stream by the driver on the main processor when L2 encapsulation is
selected by the VCE.

This driver provides the necessary callback function, which is called by
the MEI driver after receiving an error report from the firmware.

Originally, it is part of the Lantiq PPA driver, but after a few changes
it also works with the PTM driver used in OpenWrt. The direct call to
ndo_start_xmit needs to be replaced, as the PTM driver relies on locks
from the kernel. Instead dev_queue_xmit is used, which is called from a
work queue, as it is not safe to call from an interrupt handler.

Additional changes include fixes to support recent kernel versions and
a change of the used interface from ptm0 to dsl0.

Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jan Hoffmann <jan@3e8.eu>

Required for an upcoming mt76 update

Signed-off-by: Felix Fietkau <nbd@nbd.name>

378b638c70c0 mt76: mt7915: fix unused variable with testmode disabled
4f4309542862 mt76: mt7915: only use u32_get_bits with constant value
de06d828a0bf mt76: mt7921: fix injected MPDU transmission to not use HW A-MSDU
c007ba3ec7a9 mt76: mt7915: simplify conditional
64c74dc93f68 mt76: fix dfs state issue with 160 MHz channels
d3471b0d92c1 mt76: mt7615: honor ret from mt7615_mcu_restart in mt7663u_mcu_init
f4c87b32e0e9 mt76: mt7663u: introduce mt7663u_mcu_power_on routine
82de5987af54 mt76: mt7921: fix up the monitor mode
c501df4086e1 mt76: mt7921: use mt76_hw instead of open coding it
594ee03d5a11 mt76: mt7915: fix DFS no radar detection event
d8d2b383a241 mt76: split single ldpc cap bit into bits
0f336fba20fe mt76: mt7921: make mt7921_init_tx_queues static
00a066ce9914 mt76: mt7921: fix xmit-queue dump for usb and sdio
d6d2479568b2 mt76: mt7921: fix mt7921_queues_acq implementation
d17b74420199 mt76: fix monitor mode crash with sdio driver
c374559eae6f mt76: mt7915: allow beaconing on all chains
b219af63b9ce mt76: connac: add 6 GHz support for wtbl and starec configuration
630384cb3246 mt76: mt7915: add 6 GHz support
28ff1bddc7e8 mt76: mt7915: fix eeprom fields of txpower init values
d4b226cc15e7 mt76: mt7915: add txpower init for 6GHz
31e820d4ce4b mt76: mt7921: get rid of mt7921_wait_for_mcu_init declaration
9fee1faf6028 mt76: mt7915: check for devm_pinctrl_get() failure
31a970940b97 mt76: connac: make read-only array ba_range static const
e49af7036bbc mt76: use le32/16_get_bits() whenever possible
0664d39039c2 mt76: fix invalid rssi report
f16fc9d96105 mt76: mt7915: set band1 TGID field in tx descriptor
67ce2708dcef mt76: mt7915: fix beamforming mib stats
6e899abec818 mt76: mt7915: fix phy cap in mt7915_set_stream_he_txbf_caps()
c6780c85cff2 mt76: mt7915: fix typos in comments
aa6eadc09a83 mt76: usb: add req_type to ___mt76u_rr signature
74a519ab8353 mt76: usb: add req_type to ___mt76u_wr signature
2651d2c66cbd mt76: usb: introduce __mt76u_init utility routine
c03e095eee27 mt76: mt7921: disable runtime pm for usb
41085cdcd7e3 mt76: mt7921: update mt7921_skb_add_usb_sdio_hdr to support usb
e700aba6bae3 mt76: mt7921: move mt7921_usb_sdio_tx_prepare_skb in common mac code
056b7f4ebcc6 mt76: mt7921: move mt7921_usb_sdio_tx_complete_skb in common mac code.
0abf682a3def mt76: mt7921: move mt7921_usb_sdio_tx_status_data in mac common code.
b0c60d5252de mt76: mt7921: add mt7921u driver
053668acdaf8 mt76: mt7921: move mt7921_init_hw in a dedicated work

Signed-off-by: Felix Fietkau <nbd@nbd.name>

LOCK_STATE_HELD define was omitted during backport of
lockdep_assert_not_held() which leads to build failures of kernels with
CONFIG_LOCKDEP=y:

 backports-5.15.8-1/backport-include/linux/lockdep.h:16:47: error: 'LOCK_STATE_HELD' undeclared (first use in this function)

Fix it by adding missing LOCK_STATE_HELD define.

References: PR#9373
Reported-by: Oskari Rauta <oskari.rauta@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>

Add option to compile kmod-inet-diag, support for INET (TCP, DCCP, etc)
socket monitoring interface used by native Linux tools such as ss.

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Catalin Toda <catalinii@gmail.com>

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

Both struct net_device_path_ctx and struct net_device_path
are not available in 5.4. This causes an build error on the
bcm63xx target.

|mac80211/driver-ops.h: In function 'drv_net_fill_forward_path':
|driver-ops.h:1502:57: error: passing argument 4 of
|'local->ops->net_fill_forward_path' from incompatible pointer type
| [-Werror=incompatible-pointer-types]
| 1502 |                          ctx, path);
|      |                          ^~~
|      |                            |
|      |                         struct net_device_path_ctx *

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>

Package the ability to log kernel crashes to 'ramoops' pstore
files into RAM in /sys/fs/pstore

Reference to the ramoops admin guide in upstream Linux:
https://www.kernel.org/doc/html/v5.10/admin-guide/ramoops.html



The files in RAM survive a warm reboot, but not a cold reboot.

Note: kmod-ramoops selects kmod-pstore and kmod-reed-solomon.

The feature can be used by selecting the kmod-ramoops and
adding a ramoops reserved-memory definition to the device DTS.
Example from R7800:

       reserved-memory {
                rsvd@5fe00000 {
                        reg = <0x5fe00000 0x200000>;
                        reusable;
                };

                ramoops@42100000 {
                        compatible = "ramoops";
                        reg = <0x42100000 0x40000>;
                        record-size = <0x4000>;
                        console-size = <0x4000>;
                        ftrace-size = <0x4000>;
                        pmsg-size = <0x4000>;
                };
        };

If no definition has been made in DTS, no crash log is stored
for the device.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
(added CONFIG_EFI_VARS_PSTORE disable)

This commit adds the following package compile options.

CONFIG_PACKAGE_RTW88_DEBGUG:
Compile the driver with additional debug logging output

CONFIG_PACKAGE_RTW88_DEBGUGFS:
Add the possibility to map information about the driver rtw88 into
debugfs.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>

package hwmon's lm70.ko. This module supports the
National Semiconductor/TI LM70,LM71,LM74 and
TI TMP121,TMP122,TMP123 and TMP124 chips (all SPI).

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>

ksmbd is an upstream linux alternative to Samba which is lighterweight
and more performant, especially on underpowered devices.

Moving it here from the packages feed as it is now an upstream kernel
module. Also easier to update as version updates can be coordinated better

The next LTS kernel (5.15) has this included. A depend on kernel < 5.15
will need to be added later.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

This will be needed by ksmbd in a following commit.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

This module was used solely by Buffalo WZR-HP-G300NH devices
and has become obsolete with the introduction of gpio-cascade.

Signed-off-by: Mauri Sandberg <maukka@ext.kapsi.fi>

Adds kernel module for Generic GPIO cascade.

Signed-off-by: Mauri Sandberg <maukka@ext.kapsi.fi>
Signed-off-by: Petr Štetiar <ynezz@true.cz> [missing commit description]

Adds new kernel module for GPIO controlled multiplexer support.

Signed-off-by: Mauri Sandberg <maukka@ext.kapsi.fi>
Signed-off-by: Petr Štetiar <ynezz@true.cz> [missing commit description]

ddd3c2f38b30 mt76: redefine mt76_for_each_q_rx to adapt mt7986 changes
7fa5229a4228 mt76: improve signal strength reporting
025a72cd2d24 mt76: mt7915: fix injected MPDU transmission to not use HW A-MSDU
8c765fd92d97 mt76: mt7615: introduce SAR support
799a15bb68f9 mt76: fix endianness errors in reverse_frag0_hdr_trans
c114919f0c08 mt76: mt7915: Fix channel state update error issue
93191a37e59a mt76: mt7915: fix potential memory leak of fw monitor packets
cde589b2efb7 mt76: mt7921s: fix missing fc type/sub-type for 802.11 pkts
6ef22f4dc4e4 mt76: mt7915: add support for MT7986
7f1818cd8f2d mt76: mt7915: introduce band_idx in mt7915_phy
1d57a0d506db mt76: mt7915: initialize smps mode in mt7915_mcu_sta_rate_ctrl_tlv()
1f2a4816a3de mt76: mt7615: fix compiler warning on frame size
d60f335e785b mt76: mt7915: fix endianness warnings in mt7915_debugfs_rx_fw_monitor
d0ab636cb61c mt76: mt7915: fix endianness warnings in mt7915_mac_tx_free()
9d9bd7b3c48c mt76: connac: adjust wlan_idx size from u8 to u16
be1091f1172d mt76: mt7615: Fix assigning negative values to unsigned variable
d4fc42889a30 mt76: mt7915: check band idx for bcc event
98ee3e2889ea mt76: mt7915: fix logic error and remove the unused member of mt7915_dev
bbbbafb67bac mt76: mt7915: fix compiler warning
abd80cf68db1 mt76: mt7915: fix the muru tlv issue
a050c14b5631 mt76: mt7915: use min_t() to make code cleaner
9fee8f3736eb mt76: mt7915e: Fix degraded performance after temporary overheat
f2e1a62cf0d0 mt76: mt7915e: Add a hwmon attribute to get the actual throttle state.
c67df0d3130a mt76: mt7915e: Enable thermal management by default

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Now that we have separate files for each kernel version,
only the version/hash for the target kernel are available.
This cause a missing hash error (and wrong kernel version) for
bpf-headers when a testing kernel version is used for the current target.

Fix this error by manually including the kernel version/hash file for the
specific kernel version requested.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>

this should have been removed together with linux 5.4 APM821XX
support. Currently, this didn't hurt or broke something. But it
will in the next stable kernel release.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>

The SDK does not ship the generic platform files. Use relative path for
GENERIC_PLATFORM_DIR to make it work. This points it at the files from
the feed directory instead of the base SDK path

Signed-off-by: Felix Fietkau <nbd@nbd.name>

All devices which used this package migrated to the kernel GPIO-line
watchdog driver and configure it over their DT.

Signed-off-by: Sven Eckelmann <sven@narfation.org>

833b9d7fcf7f mt76: allow drivers to drop rx packets early
f703084f31cb mt76: mt7915: process txfree and txstatus without allocating skbs
047b9a9e78b3 mt76: mt7615: in debugfs queue stats, skip wmm index 3 on mt7663
fea36e02075c mt76: only kick tx queue if frames were queued
8381e54ebfb5 linux-firmware: update firmware for MT7921 WiFi device
d57dadb8c861 Revert "mt76: only kick tx queue if frames were queued"
3a21d6e2153b mt76: mt7663: disable 4addr capability
f1d66cf7a6c5 mt76: connac: fix possible NULL pointer dereference in mt76_connac_get_phy_mode_v2
c9a4146404d4 sync with upstream
4ed8c910b94e mt76: mt7921: fix possible resume failure
bf105aa6cd2f mt76: mt7921: fix network buffer leak by txs missing
e2b454b6fb30 mt76: connac: introduce MCU_EXT macros
5a87f5497c9b mt76: connac: align MCU_EXT definitions with 7915 driver
720ddc32507d mt76: connac: remove MCU_FW_PREFIX bit
da5128a59eda mt76: connac: introduce MCU_UNI_CMD macro
116109bee7cb mt76: connac: introduce MCU_CE_CMD macro
f96fbdf038d5 mt76: connac: rely on MCU_CMD macro
922f0d408413 mt76: mt7915: rely on mt76_connac definitions
b4ae1da1d1e0 mt76: mt7921: reduce log severity levels for informative messages
db105a722b87 mt76: mt7921s: make pm->suspended usage consistent
e2cc063238c0 mt76: mt7921s: fix suspend error with enlarging mcu timeout value
812b73f2f1e0 mt76: mt7915: introduce mt76_vif in mt7915_vif
b041a8a30055 mt76: mt7915: add mu-mimo and ofdma debugfs knobs
b851a3e7839d mt76: mt7921: remove dead definitions
266c7a9f2994 mt76: connac: rely on le16_add_cpu in mt76_connac_mcu_add_nested_tlv
19cc7d83190c mt76: mt7921: clear pm->suspended in mt7921_mac_reset_work
928c4550e413 mt76: mt7921s: make pm->suspended usage consistent [update]
8d6c68a7d0d1 mt76: mt7921: fix possible resume failure [update]
26fb105e538c mt76: mt7921s: fix cmd timeout in throughput test
9db482264389 mt76: mt7921: fix build regression
3edb87cdf138 mt7915: formatting change to sync with upstream
5cad38ba247d mt76: mt7915: add mt7915_mmio_probe() as a common probing function
15f9f88b362a mt76: mt7915: refine register definition
de49cf43ef34 mt76: add MT_RXQ_MAIN_WA for mt7916
6032c35f1306 mt76: mt7915: rework dma.c to adapt mt7916 changes
074d7c5381ed mt76: mt7915: add firmware support for mt7916
27b3253318e7 mt76: mt7915: rework eeprom.c to adapt mt7916 changes
030540246088 mt76: mt7915: enlarge wcid size to 544
400129c69f91 mt76: mt7915: add txfree event v3
cbbb3f65fcd0 mt76: mt7915: update rx rate reporting for mt7916
eb51c4deef0e mt76: mt7915: update mt7915_chan_mib_offs for mt7916
fb4709222028 mt76: mt7915: add mt7916 calibrated data support
e758feeaf1d6 mt76: mt7915: add device id for mt7916
115ea27a5cab mt76: connac: fix sta_rec_wtbl tag len
b3f922266685 mt76: mt7915: rely on mt76_connac_mcu_alloc_sta_req
bac5eda1f5b2 mt76: mt7915: rely on mt76_connac_mcu_alloc_wtbl_req
b44485d5c8ac mt76: mt7915: rely on mt76_connac_mcu_add_tlv routine
9cc58e254d53 mt76: connac: move mt76_connac_mcu_get_cipher in common code
60dcd9f09ff6 mt76: connac: move mt76_connac_chan_bw in common code
a8d0b7d0cc60 mt76: mt7915: rely on mt76_connac_get_phy utilities
4441db30c1c1 mt76: connac: move mt76_connac_mcu_add_key in connac module
794b6f18d0fb mt76: mt7915: fix code defect
9d2a01b6cb60 mt76: set wlan_idx_hi on mt7916
2c89977b32c2 mt76: mt7915: fix kernel build warning
6c4874839830 mt76: make mt76_sar_capa static
215fdcc7ca6c mt76: mt7915: use proper aid value in mt7915_mcu_wtbl_generic_tlv in sta mode
bc254718b40e mt76: mt7915: use proper aid value in mt7915_mcu_sta_basic_tlv
22fcff5ff21a mt76: sdio: lock sdio when it is needed
4669882aa595 mt76: mt7921s: clear MT76_STATE_MCU_RUNNING immediately after reset
944545855e0f mt76: mt7921s: update mt7921s_wfsys_reset sequence
854c8d076a34 mt76: mt7915: move pci specific code back to pci.c
a77da27796f2 mt76: mt7915: fix warning: variable 'base' is used uninitialized
7b5e69961c71 mt76: mt7915: fix warning: variable 'flags' set but not used
b5138e7b89f9 mt76: mt7921: fix a possible race enabling/disabling runtime-pm
af218fbe2500 linux-firmware: update firmware for MT7921 WiFi device
31c19c467950 mt76: mt7915: remove duplicated defs in mcu.h
9198eca1b16f mt76: connac: move mt76_connac_mcu_bss_omac_tlv in connac module
829d87a93a51 mt76: connac: move mt76_connac_mcu_bss_ext_tlv in connac module
50956cf17901 mt76: connac: move mt76_connac_mcu_bss_basic_tlv in connac module
bda40f4e1d5e mt76: mt7915: rely on mt76_connac_mcu_sta_ba_tlv
4728939c1d48 mt76: mt7915: rely on mt76_connac_mcu_wtbl_ba_tlv
e3ae1828068b mt76: mt7915: rely on mt76_connac_mcu_sta_ba
d9e9989eca07 mt76: mt7915: rely on mt76_connac_mcu_wtbl_generic_tlv
168713595fff mt76: mt7915: rely on mt76_connac_mcu_sta_basic_tlv
60394d3e3504 mt76: mt7915: rely on mt76_connac_mcu_sta_uapsd
3a79454d078d mt76: mt7915: rely on mt76_connac_mcu_wtbl_smps_tlv
9ae9aa6c1aea mt76: mt7915: rely on mt76_connac_mcu_wtbl_ht_tlv
fd8cdfab91e4 mt76: mt7915: rely on mt76_connac_mcu_wtbl_hdr_trans_tlv
a92024c5a5b5 mt76: connac: move mt76_connac_mcu_wtbl_update_hdr_trans in connac module
6dc585a3a274 mt76: connac: introduce is_connac_v1 utility routine
0f29d2aa5a72 mt76: connac: move mt76_connac_mcu_set_pm in connac module
dcf408ff8a5e mt76: mt7921: get rid of mt7921_mcu_get_eeprom
77b2a8601fc1 mt76: mt7915: rely on mt76_connac_mcu_start_firmware
65f78dee243a mt76: connac: move mt76_connac_mcu_restart in common module
5adf5b14040b mt76: mt7915: rely on mt76_connac_mcu_patch_sem_ctrl/mt76_connac_mcu_start_patch
69bf1dabe78f mt76: mt7915: rely on mt76_connac_mcu_init_download
951b1ddd370e mt76: connac: move mt76_connac_mcu_gen_dl_mode in mt76-connac module
0826b3992238 mt76: mt7915: rely on mt76_connac_mcu_set_rts_thresh
058de6d36fa9 mt76: connac: move mt76_connac_mcu_rdd_cmd in mt76-connac module
aafda86aed2b mt76: mt7921e: make dev->fw_assert usage consistent
def12bef91a3 mt76: mt7921: forbid the doze mode when coredump is in progress
009414d27d37 mt76: mt76_connac: fix MCU_CE_CMD_SET_ROC definition error
3c5856eca223 mt76: mt7921: set EDCA parameters with the MCU CE command
01a3d73b452e mt76: mt7615: fix a possible race enabling/disabling runtime-pm
123ed864d1ae mt76: mt7921e: process txfree and txstatus without allocating skbs
018f98abba68 mt76: connac: add support for passing the cipher field in bss_info
288e7443e35c mt76: mt7615: update bss_info with cipher after setting the group key
36e1577cb3d3 mt76: mt7915: update bss_info with cipher after setting the group key
d42590d8fcc8 mt76: make cipher in struct mt76_vif u8 instead of enum
11602b8505c6 mt76: mt7615e: process txfree and txstatus without allocating skbs
2ef775c10bd3 linux-firmware: add firmware for MT7916
976ea3879730 mt76: mt7915: add support for passing chip/firmware debug data to user space
d11bd7bd83f4 tools: add support for sending firmware debug data via udp
dc8e2e8dcd34 mt76: mt7921: do not always disable fw runtime-pm
7063127f852b mt76: mt7921: fix a leftover race in runtime-pm
f78f4334b0b2 mt76: mt7615: fix a leftover race in runtime-pm
f1f94d19c160 mt76: mt7915: fix ht mcs in mt7915_mac_add_txs_skb()
c2ff2f0d6d19 mt76: mt7921: fix ht mcs in mt7921_mac_add_txs_skb()
3e7954a0b32e mt76: mt7921s: fix mt7921s_mcu_[fw|drv]_pmctrl
3c2cc9034376 mt76: mt7921e: fix possible probe failure after reboot
f7f6c6dcc6eb mt76: mt7921: fix crash when startup fails.
8656198c925b mt76: sdio: disable interrupt in mt76s_sdio_irq
6204d61ab821 mt76: mt7921: fix endianness issues in mt7921_mcu_set_tx()
68c5aa56f5f2 mt76: mt7921: toggle runtime-pm adding a monitor vif
541e4e8d3c3e mt76: mt7915: set bssinfo/starec command when adding interface
78770f741af9 mt76: mt7915: introduce mt7915_set_radar_background routine
93c03778f92e mt76: mt7915: enable radar trigger on rdd2
4c76a6c3a1f2 mt76: mt7915: introduce rdd_monitor debugfs node
5b94045f927e mt76: mt7915: report radar pattern if detected by rdd2
22094b27ff6a mt76: mt7915: enable radar background detection
4282ca57a143 mt76: connac: move mt76_connac_lmac_mapping in mt76-connac module
0f16c67657a2 mt76: mt7915: add missing DATA4_TB_SPTL_REUSE1 to mt7915_mac_decode_he_radiotap
9a16d33311a7 mt76: mt7921: remove duplicated code in mt7921_mac_decode_he_radiotap
639b55fdc95e mt76: mt7615: add support for LG LGSBWAC02 (MT7663BUN)
ebbd2717a16e mt76: mt7663s: flush runtime-pm queue after waking up the device
37c3bf2256de mt76: mt7603: check sta_rates pointer in mt7603_sta_rate_tbl_update
96959bd15eef mt76: mt7615: check sta_rates pointer in mt7615_sta_rate_tbl_update
4e42e55ce636 mt76: stop the radar detector after leaving dfs channel
8b32439d5a86 mt76: mt7915: fix possible memory leak in mt7915_mcu_add_sta
b4e6f0d6f15a mt76: mt7921s: fix a possible memory leak in mt7921_load_patch
15398f1e8385 mt76: mt7915: fix mcs_map in mt7915_mcu_set_sta_he_mcs()
607eda6eb032 mt76: mt7915: update max_mpdu_size in mt7915_mcu_sta_amsdu_tlv()
69d20f2e6cb0 mt76: mt7915: fix the nss setting in bitrates
c3ffa536249a mt76: sdio: honor the largest Tx buffer the hardware can support
e3e3562f8fa0 mt76: mt7921s: run sleep mode by default
553200cf63fd firmware: update mt7662 firmware to version 2.3
20d1fed838b9 mt76x02: improve mac error check/reset reliability
9b2ac62d6f31 mt76: mt76x02: improve tx hang detection
fae295af31eb mt76: mt7915: fix/rewrite the dfs state handling logic
e0f9479bf893 mt76: mt7615: fix/rewrite the dfs state handling logic
822e1135e7e1 mt76: mt76x02: use mt76_phy_dfs_state to determine radar detector state
f8c0ed1e6bdf mt76: do not always copy ethhdr in reverse_frag0_hdr_trans
ab9b8078427a mt76: dma: initialize skip_unmap in mt76_dma_rx_fill

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Will be used in an upcoming mt76 update

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Signed-off-by: Felix Fietkau <nbd@nbd.name>

Will be used in an upcoming mt76 update

Signed-off-by: Felix Fietkau <nbd@nbd.name>

This modules is required by iptables-nft

Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>

Add option to compile kmod-vrf, support for Virtual Routing and
Forwarding (Lite).

This module depends on NET_L3_MASTER_DEV, which is a boolean kernel
option, so we need to create a configuration option also for this, and
make kmod-vrf depend on it.

Signed-off-by: Marek Behún <kabel@kernel.org>

kmod-usb-net-lan78xx depends on kmod-of-mdio when this package is
activated.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

nf-nathelper-extra and nf-conntrack-netlink had iptables related
dependencies, yet, when looking for the respective kernel symbols and
checking it's dependencies it was confirmed that iptables wasn't
required and that these were either it's own moodule or tool independent
(nftables or iptables).

Correct these and make sure no unneeded extras are pulled in.

Signed-off-by: Tiago Gaspar <tiagogaspar8@gmail.com>

This removes -static compile option. The -static option tells GCC to
link this statically with the libc, which we do not want in OpenWrt. We
want to link everything dynamically to the libc. This fixes a compile
problem with glibc.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

x86, mt7623 and others buildbot failed due to:
|Package kmod-hwmon-nct7802 is missing dependencies for the following libraries:
|regmap-core.ko
|regmap-i2c.ko

Fixes: 1ed50b92 ("package: kernel: add driver module for NCT7802Y")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>

2-Bay NAS - maximum two 3.5" Harddisks

Hardware:
  - SoC: Marvell 88F6707-A1 ARMv7 Processor 1,2GHz (ARMADA 370 SoC)
  - Ram: 1GB (2x Nanya NT5CC512M8DN-D1)
  - NAND Flash: 256MB (ESMT F59L2G81A-25T)
  - Lan: 1x GBE (Marvell 88E1318-NNB2)
  - Storage: 2x SATA HDD 3.5" Slot
  - USB: 2x USB 3.0 port (Renesas uPD720202)
  - Console: Internal J3 connector (1: Vcc, 2: Rx, 3: Tx, 4: GND)
  - LEDs: 13x GPIO controlled
  - Buttons: 2x GPIO controlled

Known issues:
  - Buzzer is unused due lack of proper driver
  - USB1/2 usbport ledtrigger won't work (through DT)
  - Renesas uPD720202 requires firmware file. It's possible to find
    non-free binary. Please look for 'UPDATE.mem' file and put in into
    '/lib/firmware/renesas_usb_fw.mem' file.

Installation:
  - Apply factory initramfs image via stock web-gui.
  - Do sysupgrade to make installation complete.

Back to stock:
  - OpenWrt rootfs partition use unused space after stock firmware.
  - Full revert is possible.
  - Login via ssh and run:

 ## ctera_c200-v2_back_to_factory start ##
 . /lib/functions.sh
 part=$(find_mtd_part "active_bank")
 active_bank=$(strings "$part" | grep bank)
 if [ "$active_bank" = "bank1" ]; then
 	echo "bank2" > /tmp/change_bank
 else
 	echo "bank1" > /tmp/change_bank
 fi
 mtd write /tmp/change_bank active_bank
 reboot
 ## ctera_c200-v2_back_to_factory end ##

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
(put back-to-stock script into commit message, removed dup. SUBPAGESIZE var,
added 01_leds for non-working dt-usb-port trigger)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>

This commit add package with hwmon-nct7802 module.

This driver implements support for the Nuvoton NCT7802Y hardware monitoring
chip. NCT7802Y supports 6 temperature sensors, 5 voltage sensors, and 3 fan
speed sensors.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
(fixed c&p'ed module description)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>