Also removes reverted patches.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Refreshed all patches.

Compile-tested on: ar7
Runtime-tested on: none

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Refreshed all patches.

Compile-tested on: ipq40xx, apm821xx
Runtime-tested on: ipq40xx

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Refreshed all patches.

Compile-tested on: ipq40xx, apm821xx
Runtime-tested on: ipq40xx

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Refreshed all patches.

Remove upstreamed:
- 010-dmaengine-dw-dmac-implement-dma-prot.patch
- 950-0148-Increase-firmware-call-buffer-size-to-48-bytes.patch
- 950-0206-Mailbox-firmware-calls-now-use-kmalloc-2749.patch
- 402-leds-trigger-netdev-fix-handling-on-interface-rename.patch

Fixes:
- CVE-2019-19332

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
[Add 010-dt-bindings-dmaengine-dw-dmac-add-protection-control.patch]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Refreshed all patches.

Remove upstreamed:
- 302-0002-dmaengine-dw-implement-per-channel-protection-contro.patch

Fixes:
- CVE-2019-19332

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

Only select ath10k-ct-regular when smallbuffers version was not
selected.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

According to many bugreports [0][1][2] the default ath10k-ct kernel
module is unusable on devices with just 64 MiB RAM or with 128 MiB and
dual ath10k cards. The target boards boot but eventually oom-killer
starts to interfere with normal operation, so the current state is
effectively broken.

Since the two patches in question have a performance impact (and
possibly some other unexpected side-effects) a dedicated build variant
is added so that users of the low RAM devices can still benefit from all
the ath10k-ct advantages.

According to testing [3] results, the issue can be experienced even with
"a 256MB device with three radios". Measured performance impact of
implementing small buffers was lowering "the maximum 5 GHz throughput on
an IPQ40xx device without RPS/XPS optimizations from 494/432 Mbit/s for
TCP transfers (download/upload) to 438/343 Mbit/s"

The patches were apparently inspired by QSDK tweaks used by ODMs for the
affected devices.

[0] http://lists.infradead.org/pipermail/openwrt-devel/2019-December/020573.html
[1] https://github.com/openwrt/openwrt/pull/1077
[2] https://bugs.openwrt.org/index.php?do=details&task_id=2664
[3] https://github.com/freifunk-gluon/gluon/pull/1440#issue-195607701



Signed-off-by: Paul Fertser <fercerpav@gmail.com>
[Remove double CONFIG_ATH10K-CT_LEDS entry]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Deactivate CONFIG_SFP for kernel 4.19 in the generic configuration.
The CONFIG_SFP configuration option was not set to anything in the
ath79 build for me, set it to deactivated by default.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

The factory image for the dlink_dir-615-e4 is getting too big which makes
the full ath79 tiny build fail, deactivate it by default.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

- wireless patches
- defconfig patches

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Don't build with uClibc-ng. It's totally unsupported as several functions
are missing.

Make the musl libc support conditional.

Fix hash with make check FIXUP=1. Apparently I based the Makefile off of
libedit and forgot to fix the hash.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Fixes: 856ea2ba ("libcxx: Add package")

The device label contains:
E01: 74:4D:28:xx:xx:30
E05: 74:4D:28:xx:xx:34

The first value corresponds to the address set in hard_config 0x10.

That one is taken for the label MAC address.

Signed-off-by: Sven Roederer <freifunk@it-solutions.geroedel.de>

The node pinctrl0 is already set up in the SOC DTSI files, but
defined again as member of pinctrl in most of the device DTS(I)
files. This patch removes this redundancy for the entire ramips
target.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

Unloading and reloading the modules fails, as platform_device_put() does not
release resources fully.

root@OpenWrt:/# insmod i2c-gpio-custom bus0=0,18,0,5
[  196.860620] Custom GPIO-based I2C driver version 0.1.1
[  196.871162] ------------[ cut here ]------------
[  196.880517] WARNING: CPU: 0 PID: 1365 at fs/sysfs/dir.c:31 0x80112158
[  196.893431] sysfs: cannot create duplicate filename '/devices/platform/i2c-gpio.0'
...
[  197.513200] kobject_add_internal failed for i2c-gpio.0 with -EEXIST, don't try to register things with the same name in the same directory.

This patch fixes it by replacing platform_device_put() to
platform_device_unregister().

Fixes: da774085 ("i2c-gpio-custom: minor bugfix")
Fixes: 3bc81edc ("package: fix w1-gpio-custom package (closes #6770)")

Signed-off-by: Sungbo Eo <mans0n@gorani.run>

The rpcd service is an important service, but if the service stops
working for any reason, no one will ever respawn that service. With this
commit, the procd service will monitor if the rpcd service
is running. If the rpcd service has crashed, then
procd respawns the rpcd service.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>

Several CMake packages such as log4cplus and protobuf(-c) install to
lib64 instead of lib on some hosts. This completely breaks rpath linking.
Override it globally to avoid fixing each package individually.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Tested-by: Sebastian Kemper <sebastian_ml@gmx.net>

The USB descriptor parsing in adb fails to detect SuperSpeed devices
because of the SuperSpeed Endpoint Companion Descriptor.  This
cherry-picks the upstream fix for the problem.

Unfortunately there never were a release with this fix before the
conversion to C++, so upgrading to a newer version isn't an option.

This makes adb work with SuperSpeed devices like the Sierra Wireless
EM7565.  Tested and verified.

Signed-off-by: Bjørn Mork <bjorn@mork.no>

- both packages provide ca-certs
- make ca-bundle the default provider

This should allow easy transition between these two forms of CA certificates storage

Signed-off-by: Maxim Storchak <m.storchak@gmail.com>

Currently in OpenWrt, there are two libc++: libstdcpp and uClibc++. The
former is huge and the latter supports only C++98 with some basic support
for C++11. Those C++ versions seem to be specific to the compiler version

libcxx supports C++11 and above while being much smaller than libstdcpp.
On mt7621, these are the sizes of the ipks that I get:

libstdcpp: 460786
libcxx: 182881
uClibc++:67720

libcxx is faster than uClibc++ and is under active development as part of
the LLVM project while uClibc++ is effectively dead.

This PR modifies uclibc++.mk to expose the make menuconfig option. Further
cleanup is beyond the scope of this PR. What that means is, this is not
used by default.

A g++-libcxx wrapper based on the uClibc++ one was added. Works the same
way.

Compile tested with all packages that use uclibc++.mk in their Makefiles
under mipsel_24kc. kismet fails compilation but that package needs to be
cleaned up and updated.

Runtime tested with gddrescue, gdisk, dcwapd, bonnie++, and aircrack-ng
on a TP-Link Archer C7v2.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

Avoids redefining bool.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

VMWare ESXI 6.5 and above is not compatible with
subformat=monolithicSparse (The default qemu-img convert -O VMDK option).
Monolithic Sparse vmdk can be imported, but issues occur when running
sysupgrade with new images and other tasks that modify the file system
(issues like Kernel panics, reboot loops, sometimes crashing the Host ESXI
box).

This change creates an additional VMDK output file for ESXI that sets the
subformat to monlithicFlat, and the adapter_type to the SCSI lsilogic
controller.

This change existed back on:
25e36d37

But it looks like the change was removed when refactoring occurred with:
5f6a2732f892b6229473576d89cc963ae9c97d5d

Signed-off-by: John Sommerville <jsommerville@untangle.com>

Its way more trouble to update this to a newer version of qemu than it
is to backport the two additional features we need.

Signed-off-by: Brett Mastbergen <bmastbergen@untangle.com>

apache mirrors holds only latest releases, to download
older releases, one must use archive.apache.org to get
them.

Signed-off-by: Jiri Kastner <cz172638@gmail.com>

The release notes since last time for wave-1:

 * No changes to wave-1, but I make a version .014 copy anyway to keep
   the makefile in sync.

The release notes since last time for wave-2:

 * December 16, 2019: Wave-2 has a fix to make setting txpower work
                      better. Before setting the power was ignored at
                      least some of the time (it also appeared to work
                      mostly, so I guess it was being correctly set in
                      other ways).

Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>

Update linux-firmware to 20191215

git log --pretty=oneline --abbrev-commit 20190815..20191215

eefb5f7 inside-secure: add new "mini" firmware for the EIP197 driver
dd1a12e Merge branch 'RB3-adsp-cdsp-mss-v4' of https://github.com/andersson/linux-firmware
c523dcd WHENCE: Add raspberry-pi4 SDIO file
99a15a4 Merge branch 'rpi4-fw' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux-firmware
2260cbd Merge branch 'master' of https://github.com/dikshitaagarwal/video_firmware_5.4
4c688be Merge branch 'for-upstream' of git://git.chelsio.net/pub/git/linux-firmware
e10ed21 qcom: update venus firmware files for v5.4
af4c4be cxgb4: Update firmware to revision 1.24.11.0
f93c7a1 brcm: Add BCM43455 NVRAM for Raspberry Pi 4 B
212e441 qcom: Add SDM845 Compute DSP firmware
ec84cf9 qcom: Add SDM845 Audio DSP firmware
62d0a1a qcom: Add SDM845 modem firmware
e8a0f4c rtl_nic: add firmware rtl8168fp-3
9581f15 Merge branch 'nxp_mc' of https://github.com/NXP/linux-firmware
978c04e linux-firmware: Update NXP Management Complex firmware to version 10.18.0
c62c3c2 linux-firmware: Update firmware file for Intel Bluetooth AX201
6272383 linux-firmware: Update firmware file for Intel Bluetooth AX200
84a7ca5 linux-firmware: Update firmware file for Intel Bluetooth 9560
96c3994 linux-firmware: Update firmware file for Intel Bluetooth 9260
7319341 amdgpu: update navi14 vcn firmware
b363d9d amdgpu: update navi10 vcn firmware
f1100dd Merge branch 'ehl_tgl_guc_huc' of git://anongit.freedesktop.org/drm/drm-firmware
4debf21 i915: Add HuC firmware v7.0.3 for TGL
1eb2ac4 i915: Add GuC firmware v35.2.0 for TGL
4b0a210 i915: Add HuC firmware v9.0.0 for EHL
610fe75 i915: Add GuC firmware v33.0.4 for EHL
11bdc57 rtw88: RTL8723D: add firmware file v48
9e194c7 qed: Add firmware 8.40.33.0
4065643 amdgpu: add new navi14 wks gfx firmware for 19.30
d4f88ea amdgpu: update navi14 firmware for 19.30
ea755b6 amdgpu: update raven firmware for 19.30
340e06e linux-firmware: Add firmware file for Intel Bluetooth AX201
ad7a8b2 Mellanox: Add new mlxsw_spectrum2 firmware 29.2000.2308
e756bf3 Mellanox: Add new mlxsw_spectrum firmware 13.2000.2308
b27d123 rtl_nic: add firmware files for RTL8153
180e2b4 rtl_bt: Update configuration file for BT part of RTL8822CU
0acd93e bnx2x: Add FW 7.13.15.0.
2b016af linux-firmware: Update AMD cpu microcode
4c3e853 linux-firmware: Update firmware file for Intel Bluetooth AX200
7a79d22 linux-firmware: Update firmware file for Intel Bluetooth AX201
fdab23a linux-firmware: Update firmware file for Intel Bluetooth 9560
b68efd7 linux-firmware: Update firmware file for Intel Bluetooth 9260
aa95e90 amdgpu: add initial navi14 firmware form 19.30
c1ce20e rtlwifi: rtl8821ae: Add firmware for the RTL8812AE variant.
7d187ac ice: Fix up WHENCE entry and symlink
4c55b97 Merge branch 'dev-queue' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/firmware
7c4db73 nvidia: Update Tegra210 XUSB firmware to v50.24
c054c53 nvidia: Add XUSB firmware for Tegra194
9cfefbd Remove duplicate symlinks
2de7abd copy-firmware: Create symlinks from WHENCE file
2116bcd Make symlinks consistent
c0590d8 amdgpu: update vega20 ucode for 19.30
43cc648 amdgpu: update vega12 ucode for 19.30
ffa0ed7 amdgpu: update vega10 ucode for 19.30
83e1b41 amdgpu: update picasso ucode for 19.30
7008617 amdgpu: update raven2 ucode for 19.30
9200baa amdgpu: update raven ucode for 19.30
f25a39c amdgpu: add new raven rlc firmware
9ae61e7 ice: Add package file for Intel E800 series driver
417a9c6 amdgpu: add initial navi10 firmware
702cc63 Merge branch 'cml_tgl-icl-dmc_huc_updates' of git://anongit.freedesktop.org/drm/drm-firmware
3182b4b Merge branch 'gpu-845' of https://github.com/ndechesne/linux-firmware
3ea84e5 drm/i915/firmware: Add v9.0.0 of HuC for Icelake
60ddd0e drm/i915/firmware: Add v4.0.0 of HuC for Cometlake
c47d8f8 drm/i915/firmware: Add v4.0.0 of HuC for Geminilake
2cdb78c drm/i915/firmware: Add v2.0.0 of HuC for Broxton
38965af drm/i915/firmware: Add v4.0.0 of HuC for Kabylake
8d127af drm/i915/firmware: Add v2.0.0 of HuC for Skylake
e7b6fa7 drm/i915/firmware: Add v33 of GuC for CML
e4ea25f drm/i915/firmware: Add v2.04 of DMC for TGL
51deca6 drm/i915/firmware: Add v1.09 of DMC for ICL
88ea23e qcom: add firmware files for Adreno a630
6c6918a linux-firmware: Update firmware file for Intel Bluetooth AX201
6ddb9d9 Merge branch 'for-upstream' of git://git.chelsio.net/pub/git/linux-firmware
d45c950 nvidia: Add XUSB firmware for Tegra186
65c6595 Add symlinks for Tegra VIC firmware binaries
0b22bfc rtl_bt: Update RTL8723D BT FW to 0x828A_96F1
f667c00 rtl_nic: add firmware rtl8125a-3
fe1ae0d linux-firmware: Add firmware file for Intel Bluetooth AX201
2f885ba Chelsio driver loads firmware configuration file to allow firmware to distribute resources before chip bring up. Chelsio NIC driver, cxgb4 searches for firmware config file at /lib/firmware/cxgb4/ directory.
7307a29 brcm: Add 43455 based AP6255 NVRAM for the Minix Neo Z83-4 Mini PC
65d02cd brcm: Add 43340 based AP6234 NVRAM for the PoV TAB-P1006W-232 tablet
f38fb4f Merge tag 'iwlwifi-fw-2019-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/linux-firmware


40e4162 iwlwifi: update FWs to core45-152 release
c0fb3d9 check_whence: Add copy-firmware.sh to the list of ignored files
aa703aa rtl_bt: Update RTL8822C BT FW to V0x098A_94A4
665001a linux-firmware: Update firmware file for Intel Bluetooth AX200
c0ca980 linux-firmware: Update firmware file for Intel Bluetooth AX201
b6427bf linux-firmware: Update firmware file for Intel Bluetooth 9560
fe48882 linux-firmware: Update firmware file for Intel Bluetooth 9260
ebd40c6 Mellanox: Add new mlxsw_spectrum firmware 13.2000.1886

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
[Added missing symbolic links to Makefile]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

This backports the patch for GCC PR target/89587 (gcc's rs6000
configuration unconditionally sets MULTIARCH_DIRNAME, even when
multiarch is disabled).

This currently affects apm821xx and may cause issues when
cross-compiling packages, e.g. Python 3[1].

This includes patches for GCC 8 (with the changelog diff removed);
this change is already included in GCC 9.2 and 7.5.

[1]: https://github.com/openwrt/packages/issues/10552



Signed-off-by: Jeffery To <jeffery.to@gmail.com>
[Removed patch for GCC 7.4.0, GCC 7.5.0 already contains this]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

This fixes gcc build error within clang 11.0, it tweaks the version
string from LLVM to clang.

Signed-off-by: Yorkie Liu <yorkiefixer@gmail.com>

Enable mt76 driver on VR200/VR200v.

Signed-off-by: Kevin Schmidt <kevin.patrick.schmidt@googlemail.com>

led2l and led2h value is incorrectly set by led3l and led3h.
Bug was introduced in commit: 863e79f8

Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
Fixes: 863e79f8 ("lantiq: add support for kernel 4.9")

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

5f9ae57 client: fix invalid data access through invalid content-length values

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

b4e25d5 libblkid-tiny: fix symbol collision with full libblkid

Fixes: FS#2691, FS#2692
Signed-off-by: Jo-Philipp Wich <jo@mein.io>

MAC addresses are stored in factory partition at:
0x0004: WiFi 2.4GHz (label_mac +1)
0x0028: LAN, WAN (label_mac)

Signed-off-by: Sungbo Eo <mans0n@gorani.run>

This patch does the following:

- prepend vendor name to model
- set status LEDs to follow the behavior in stock FW
- simplify state_default node definition
- use generic name for flash node

Stock FW status indicators:
https://files.xiaomi-mi.com/files/Mi_Router_Wi-Fi_Nano/Mi_router-NANO_EN.pdf


> Yellow: power on / off
> Blue: during normal operation
> Red: in case of problems with the operation of the device

Signed-off-by: Sungbo Eo <mans0n@gorani.run>

Backport two upstream commits that allow building
openvpn-openssl without OpenSSLs deprecated APIs.

Full changelog:
https://community.openvpn.net/openvpn/wiki/ChangesInOpenvpn24#OpenVPN2.4.8



Signed-off-by: Magnus Kroken <mkroken@gmail.com>