- Sep 15, 2019
-
-
Karl Palsson authored
This enables using the "eTactica" LED during boot, to indicate failsafe, and during upgrade, while still leaving the LED alone for normal operation. This brings the device more in line with how other devices work, and makes the failsafe functionality easier to use and understand. Signed-off-by:Karl Palsson <karlp@etactica.com>
-
Petr Štetiar authored
c26f8907d1d2 firewall3: fix typo that affects ICMPv6 rules with numeric icmp_type Signed-off-by:Petr Štetiar <ynezz@true.cz>
-
Robert Marko authored
Update the ath10k-ct driver version to 5e8cd86f90dac966d12df6ece84ac41458d0e95f to enable dynamic VLANs to work. Patches refreshed during the bump. Signed-off-by:
Robert Marko <robimarko@gmail.com> [commit description facelift] Signed-off-by:
-
Robert Marko authored
This enables a feature flag in the wave-2 firmware wmi-services indicating it can send software-encrypted raw frames. This should in turn allow the AP-VLAN feature to work. Signed-off-by: -
Petr Štetiar authored
This patch removes scons host build tool, as commit 7087efd72a8d ("scons: move host build tool to a proper place") in the packages feed has moved scons into the new home. There are currently no packages in the master tree which would need scons, yet scons is build always as part of host tools, just in order to satisfy host build dependency of few packages in the packages feeds. Ref: https://github.com/openwrt/packages/pull/9584 Acked-by:Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
-
Petr Štetiar authored
commit eb204d14f75c ("base-files: implement generic service_running") introduced generic service_running so it's not needed to copy&paste same 3 lines over and over again. I've removed service_running from netifd/network init script as well, because it was not working properly, looked quite strange and I didn't understand the intention: $ /etc/init.d/network stop $ service network running && echo "yes" || echo "nope" ( have to wait for 30s ) Command failed: Request timed out yes Signed-off-by: -
Luiz Angelo Daros de Luca authored
Adds a default status action for init.d scripts. procd "service status" will return: 0) for loaded services (even if disabled by conf or dead) 3) for inactive services 4) when filtering a non-existing instance Signed-off-by:
Luiz Angelo Daros de Luca <luizluca@gmail.com> [rebased, cleaned up] Signed-off-by:
-
Petr Štetiar authored
DRY is good, otherwise we're going to suffer with a copy&paste disease in the init scripts. Signed-off-by: -
Hans Dedecker authored
1d24009 netlink: rename netlink callback handlers 91a28e4 ndp: answer global-addressed NS manually fd93e36 dhcpv6: retry failed PD assignments on addrlist change Signed-off-by:Hans Dedecker <dedeckeh@gmail.com>
-
Ivan Hörler authored
The Linkit Smart 7688 has a SD-Card reader that does not work with the official build of openwrt. Adding kmod-sdhci-mt7620 makes it working. Signed-off-by:Ivan Hörler <i.hoerler@me.com>
-
Daniel Golle authored
Only the 2R version got the STM32 uC connected as 2nd SPI device. Hence move the spidev node from mt7628an_wrtnode_wrtnode2.dtsi to mt7628an_wrtnode_wrtnode2r.dts. Signed-off-by:Daniel Golle <daniel@makrotopia.org>
-
Felix Fietkau authored
Fixes a syntax error in processing the type src-git-full Signed-off-by:Felix Fietkau <nbd@nbd.name>
-
Yousong Zhou authored
It's a leftover from 2271967f ("apm821xx: utilize build ARTIFACTs") Signed-off-by:
Yousong Zhou <yszhou4tech@gmail.com> Acked-by:
Christian Lamparter <chunkeey@gmail.com>
-
Yousong Zhou authored
Signed-off-by: -
Yousong Zhou authored
Currently for at91 target, Build/install-dtb can be triggered concurrently for multiple different TARGET_FILESYSTEMS, cp command can fail when the target file is already open exclusively by other cp process [ -f /builder/shared-workdir/build/build_dir/target-arm_arm926ej-s_musl_eabi/linux-at91_sam9x/at91sam9263ek-uImage -a -f /builder/shared-workdir/build/build_dir/target-arm_arm926ej-s_musl_eabi/linux-at91_sam9x/root.ubifs+fs=-m_2048_-e_126KiB_-c_2048+pkg=68b329da ] [ -f /builder/shared-workdir/build/build_dir/target-arm_arm926ej-s_musl_eabi/linux-at91_sam9x/at91sam9263ek-uImage -a -f /builder/shared-workdir/build/build_dir/target-arm_arm926ej-s_musl_eabi/linux-at91_sam9x/root.ext4+pkg=68b329da ] cp -fpR /builder/shared-workdir/build/build_dir/target-arm_arm926ej-s_musl_eabi/linux-at91_sam9x/linux-4.14.141/arch/arm/boot/dts/at91sam9263ek.dtb /builder/shared-workdir/build/bin/targets/at91/sam9x/openwrt-at91-sam9x-at91sam9263ek.dtb; cp -fpR /builder/shared-workdir/build/build_dir/target-arm_arm926ej-s_musl_eabi/linux-at91_sam9x/linux-4.14.141/arch/arm/boot/dts/at91sam9263ek.dtb /builder/shared-workdir/build/bin/targets/at91/sam9x/openwrt-at91-sam9x-at91sam9263ek.dtb; cp: cannot create regular file '/builder/shared-workdir/build/bin/targets/at91/sam9x/openwrt-at91-sam9x-at91sam9263ek.dtb': File exists Makefile:87: recipe for target '/builder/shared-workdir/build/build_dir/target-arm_arm926ej-s_musl_eabi/linux-at91_sam9x/tmp/openwrt-at91-sam9x-at91sam9263ek-ubifs-dtb' failed make[4]: *** [/builder/shared-workdir/build/build_dir/target-arm_arm926ej-s_musl_eabi/linux-at91_sam9x/tmp/openwrt-at91-sam9x-at91sam9263ek-ubifs-dtb] Error 1 Signed-off-by:
-
- Sep 14, 2019
-
-
Koen Vandeputte authored
Move the IRQ fix from generic to ar71xx specific. Other targets like ath79 have specific pathes to delete this code. This resulted in a build failure on ath79 While at it, wipe the 4.19 version, as ar71xx will never reach this. Fixes: 530f76708cef ("ar71xx: Fix potentially missed IRQ handling during dispatch") Signed-off-by:Koen Vandeputte <koen.vandeputte@ncentric.com>
-
Adrian Schmutzler authored
For devices inheriting from bcm63xx_netgear, the IMAGES variable is overwritten with the same values as defined in the parent definition. So, remove the unnecessary overwrite. Signed-off-by:Adrian Schmutzler <freifunk@adrianschmutzler.de>
-
Jonas Gorski authored
SquashFS has a minimum block size of at least 1k, so we need to make sure the last data block is also at least that big. This is not an issue on NOR or SD CARD devices, since their rootfs partitions go all the way to the end of the usable space. But on NAND with ubiblock, the rootfs partition will be the exact space, rounded up to LEB size. Unfortunately, some NAND chips with small sub pages have a LEB size of x.5 kiB. This can cause the the last data block to be less than 1k, which will cause the last block to be inaccessible, causing boot failures as seen on MR24: [ 1.532960] block ubiblock0_3: created from ubi0:3(rootfs) [ 1.538457] ubiblock: device ubiblock0_3 (rootfs) set to be root filesystem [ 1.552847] SQUASHFS error: squashfs_read_data failed to read block 0x621472 [ 1.559896] squashfs: SQUASHFS error: unable to read id index table [ 1.566474] VFS: Cannot open root device "(null)" or unknown-block(254,0): error -5 Since on most NOR devices, the start of the squashfs partition is not aligned. Since the start of the rootfs_data partition there is dependend on the SquashFS size, we cannot just always pad it, as the padding could creep into the rootfs_data partition, breaking jffs2. So fix this by ensuring a squashfs rootfs is always a multiple of 1k only for UBI and NAND sysupgrade images. Fixes #2460 without affecting NOR devices. Tested-by:
Russell Senior <russell@personaltelco.net> Signed-off-by:
Jonas Gorski <jonas.gorski@gmail.com>
-
- Sep 13, 2019
-
-
Koen Vandeputte authored
If both interrupts are set in the current implementation only the 1st will be handled and the 2nd will be skipped due to the "if else" condition. Fix this by using the same approach as done for QCA955x just below it. Signed-off-by: -
Koen Vandeputte authored
If both interrupts are set in the current implementation only the 1st will be handled and the 2nd will be skipped due to the "if else" condition. Fix this by using the same approach as done for QCA955x just below it. Signed-off-by: -
Koen Vandeputte authored
Refreshed all patches. Remove upstreamed: - 390-v5.3-net-sched-fix-action-ipt-crash.patch Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: -
Koen Vandeputte authored
Refreshed all patches. Remove upstreamed: - 390-v5.3-net-sched-fix-action-ipt-crash.patch Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: -
Koen Vandeputte authored
Refreshed all patches. Compile-tested on: none Runtime-tested on: none Signed-off-by:
-
- Sep 12, 2019
-
-
Hans Dedecker authored
Fixes commit 7ff5b12e e73bf11 config: ra_management compatibility support d818380 odhcpd: router: Fix out of scope memory access 94a1c94 dhcpv6-ia: free assignment when validity timer expires 752fc2c router: speed up initial router advertisements 09aa022 router: close socket upon NETEV_IFINDEX_CHANGE fixed 79eb160 router: fix previous commit 6034b5c router: close socket upon NETEV_IFINDEX_CHANGE 000182f router: fix lingering uloop socket descriptor f6c2242 router: support ra_lifetime being 0 Signed-off-by:
-
Ingo Feinerer authored
184b707 umbim: add home provider query support Signed-off-by:Ingo Feinerer <feinerer@logic.at>
-
Hans Dedecker authored
e73bf11 config: ra_management compatibility support d818380 odhcpd: router: Fix out of scope memory access 94a1c94 dhcpv6-ia: free assignment when validity timer expires 752fc2c router: speed up initial router advertisements 09aa022 router: close socket upon NETEV_IFINDEX_CHANGE fixed 79eb160 router: fix previous commit 6034b5c router: close socket upon NETEV_IFINDEX_CHANGE 000182f router: fix lingering uloop socket descriptor f6c2242 router: support ra_lifetime being 0 d111809 router: make RA flags configurable (FS#2019) Update odhcpd defaults according to the new RA flags implementation Signed-off-by: -
Felix Fietkau authored
It can take a long time to load the firmware Signed-off-by: -
David Bauer authored
The UniFi AC LED mapping is currently off. The blue/white LED are used as WiFi indicators, while the vendor firmware does not feature WiFI LEDs. Instead, the LEDs are used to indicate the devices status. Align the LED mapping to match the vendor firmware as good as possible. Signed-off-by:David Bauer <mail@david-bauer.net>
-
David Bauer authored
a88fb42 iwinfo: add device id for Qualcomm Atheros QCA9886 1b69d86 iwinfo: add device id for Qualcomm Atheros QCA9887 Signed-off-by: -
Daniel Golle authored
KERNEL_DEVPTS_MULTIPLE_INSTANCES and KERNEL_POSIX_MQUEUE were previously enabled by default only if KERNEL_LXC_MISC was selected. KERNEL_LXC_MISC was enabled only if the SMALL_FLASH (anti-)feature was not selected. Now that KERNEL_LXC_MISC no longer exists, make sure that those options are also only enabled by default for !SMALL_FLASH targets. Fixes: 4f94a331 ("config: kernel: remove KERNEL_LXC_MISC") Signed-off-by:
-
Yousong Zhou authored
Kernel features are neutral. The two cascaded features can also be useful for other container related tools It's also less error-prone if only kconfig symbols from the kernel are prefixed KERNEL_ Signed-off-by: -
Yousong Zhou authored
Binaries in container images may need this. E.g. nginx:1.7.9 used in k8s default deployment manifest file for demostration [1] [1] https://kubernetes.io/docs/concepts/workloads/controllers/deployment/#creating-a-deployment Signed-off-by:
-
- Sep 11, 2019
-
-
Koen Vandeputte authored
This reverts commit 5b98061b. As Piotr Dymacz pointed out: In QCA MIPS based WiSOCs, for first USB interface, device/host mode can be selected _only_ in hardware see description of 57c641ba QCA955x and QCA9563, second USB can be switched to device mode in software (tested and confirmed on real hardware). Signed-off-by:
-
Moritz Warning authored
DEVICE_TITLE is split up into DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT Signed-off-by:Moritz Warning <moritzwarning@web.de>
-
Moritz Warning authored
DEVICE_TITLE is split up into DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT Signed-off-by: -
Tomislav Požega authored
Current ar724x code does the reset only on single pci bus, and in case of qca9558 writes the wrong register (0x10 vs 0x0c). This change allows the reset of second pci bus, commonly used in Archer C7 devices, in case host controller is stuck in reset. If the resetting controller on boot can solve any other issue it can be enabled unconditionally by removing reset check before ar724x_pci_hw_init is called. Signed-off-by:
Tomislav Požega <pozega.tomislav@gmail.com> [refreshed to apply cleanly] Signed-off-by:
-
Tomislav Požega authored
Enable flushing of write buffers on qca955x. GPL code has 0x88 reg defined for PCI flush which is likely an error since the device freezes on boot. So use DS default value 0xA8 for PCI flush. Signed-off-by: -
Tomislav Požega authored
Switch from ci_usb_setup to generic platform initialization of usb0 port. Signed-off-by: -
Koen Vandeputte authored
Refreshed all patches. Remove upstreamed: - 950-0774-watchdog-bcm2835_wdt-Fix-module-autoload.patch - 0017-usb-host-fotg2-restart-hcd-after-port-reset.patch Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: -
Koen Vandeputte authored
Refreshed all patches. Remove upstreamed: - 0032-usb-host-fotg2-restart-hcd-after-port-reset.patch Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by:
-
